Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Yu-hua Wang, Chuan-bing Huang, Yue-hua Hu, Ye-min Hu, Ye Lan, Beneficiation of diasporic-bauxite ore by selective flocculation with a polyacrylate flocculant, Minerals Engineering, Vol. 21, No. 9, 2008

Warner, N.A., Conceptual design for lower-energy primary aluminium, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

M. Davies, P. Smith, W.J. Bruckard, J.T. Woodcock, Treatment of salt cakes by aqueous leaching and Bayer-type digestion, Minerals Engineering, Vol.21 No.8, 2008

Mohapatra, D., and Park, K.H., Solvent extraction of Al(III) from sulfate solutions using bis (2,4,4-trimethylpentyl) phosphinic acid- mecanism and compexation, Minerals and Metallurgical Processing, Vol.25, No.2, 2008

B. Dash, B.R. Das, B.C. Tripathy, I.N. Bhattacharya, S.C. Das, Acid dissolution of alumina from waste aluminium dross, Hydrometallurgy, Vol. 92, No.1-2, 2008

E. Poulin, J.-F. Blais, G. Mercier, Transformation of red mud from aluminium industry into a coagulant for wastewater treatment, Hydrometallurgy, Vol. 92, No.1-2, 2008

M.N. El Hazek, F.Y. Ahmed, M.A. El Kasaby and R.M. Attia, Sulfuric acid leaching of polymetallic Abu Zeneima gibbsite-shale, Hydrometallurgy, Vol. 90, No.1, 2008

H.-G. Schwarz, Technology diffusion in metal industries: driving forces and barriers in the German aluminium smelting sector, Journal of Cleaner Production, Vol. 16, No. 1, Supplement 1, 2008

W.J. Bruckard and J.T. Woodcock, Characterisation and treatment of Australian salt cakes by aqueous leaching, Minerals Engineering, Vol.20 No.15, 2007

J.G. Reynolds and R. Carter, Density model for sodium hydroxide-sodium aluminate solutions , Hydrometallurgy, Vol.89 No.3-4, 2007

G. Liu, H. Zhong, Y. Hu, S. Zhao and L. Xia, The role of cationic polyacrylamide in the reverse flotation of diasporic bauxite, Minerals Engineering, Vol.20 No.13, 2007

Lenka, S.N. et al, Magnetohydrodynamics in advanced Hall-Heroult cells: physical modelling of flow in a laboratory scale cell, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.3, 2007

J. Zeng, Z. Yin and Q. Chen, Intensification of precipitation of gibbsite from seeded caustic sodium aluminate liquor by seed activation and addition of crown ether, Hydrometallurgy, Vol.89 No.1-2, 2007

D. Mohapatra, K. Hong-In, C.-W. Nam and K.-H. Park, Liquid-liquid extraction of aluminium(III) from mixed sulphate solutions using sodium salts of Cyanex 272 and D2EHPA, Separation and Purification Technology, Vol.56 No.3, 2007

C. Bazin, K. El-Ouassiti and V. Ouellet, Sequential leaching for the recovery of alumina from a Canadian clay, Hydrometallurgy, Vol.88 No.1-4, 2007

T. Kekesi, Gallium extraction from synthetic Bayer liquors using Kelex 100-kerosene, the effect of loading and stripping conditions on selectivity, Hydrometallurgy, Vol.88 No.1-4, 2007

B. Dash, B.C. Tripathy, I.N. Bhattacharya, S.C. Das, C.R. Mishra and B.S. Pani, Effect of temperature and alumina/caustic ratio on precipitation of boehmite in synthetic sodium aluminate liquor, Hydrometallurgy, Vol.88 No.1-4, 2007

Buntenbach, S., Bauxite beneficiation, Aufbereitungs Technik, Vol.48 No.3, 2007

Brooks, G., et al, Challenges in light metals production, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.1, 2007

Chen, Y., et al, Study on the recycling of valuable metals in spent Al₂O₃-based catalyst, Minerals & Metallurgical Processing, Vol.24 No.1, 2007

B.R. Das, B. Dash, B.C. Tripathy, I.N. Bhattacharya and S.C. Das, Production of n-alumina from waste aluminium dross, Minerals Engineering, Vol.20 No.3, 2007

L. Ou, Q. Feng, Y. Chen, Y. Lu and G. Zhang, Disintegration mode of bauxite and selective separation of Al and Si, Minerals Engineering, Vol.20 No.2, 2007

Wedel, H.H., Processing of aluminium scrap with sensor-based sorting, Aufbereitungs Technik, Vol.47 No.12, 2006

N. Pejcinovic, T. Nguyen and R. Frost, Effect of surfactants on bauxite residues suspensions viscosity, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.292 No.1, 2007

Munger, D., and Vincent, A., Electric Boundary Conditions at the Anodes in Aluminum Reduction Cells, Metallurgical & Materials Transactions B, Vol.37B No.6, 2006

Brisson, P.Y., et al, Investigation of electrolyte penetration in three carbon cathode materials for aluminium electrolysis cells, Canadian Metallurgical Quarterly, Vol.45 No.4, 2006

E. Jamieson, A. Jones, D. Cooling and N. Stockton, Magnetic separation of Red Sand to produce value, Minerals Engineering, Vol.19 No.15, 2006

Xiao, J.B., and Ren, F.L, Rapid determination of organic liquids in bauxite from Laos by RP-HPLC after solid phase extraction, Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.4, 2006

Qi Yuan Chen, Jian Bo Xiao and Xiao Qing Chen, Rapid determination of organic acids in Bayer liquors by high-performance liquid chromatography after solid-phase extraction, Minerals Engineering, Vol.19 No.14, 2006

E. Nordheim and G. Barrasso, Sustainable development indicators of the European aluminium industry, Journal of Cleaner Production, Vol.15 No.3, 2007

M.-J. Fortin and C. Gagnon, Interpreting major industrial landscapes: Social follow-up on meanings, the case of two aluminium smelters, Alcan (Alma, Canada) and Pechiney (Dunkirk, France), Environmental Impact Assessment Review, Vol.26 No.8, 2006

Y.Y. Park, S.O. Lee, T. Tran, S.J. Kim and M.J. Kim, A study on the preparation of fine and low soda alumina, International Journal of Mineral Processing, Vol.80 No.2-4, 2006

Martinez, J.P.S., et al, The sulfuric acid leaching of Bayer electrofilter fines: a practical kinetical approach, JOM, Vol.58 No.8, 2006

Silny, A., et al, Carbon consumption during laboratory aluminium electrolysis, Canadian Metallurgical Quarterly, Vol.45 No.3, 2006

E.H.M. Moors, Technology strategies for sustainable metals production systems: a case study of primary aluminium production in The Netherlands and Norway, Journal of Cleaner Production, Vol.14 No.12-13, 2006

McFadden, F.J. et al, The Multivariable Model-Based Control of the Non-Alumina Electrolyte Variables in Aluminum Smelting Cells, JOM, Vol.58 No.2, 2006

Piskazhova, T.V. and Mann, V.C., The Use of a Dynamic Aluminium Cell Model, JOM, Vol.58 No.2, 2006

Arkhipov. G.V., The Mathematical Modeling of Aluminum Reduction Cells, JOM, Vol.58 No.2, 2006

Schoning, C., and Grande, T., The Stability of Refractory Oxides in Sodium-Rich Environments, JOM, Vol.58 No.2, 2006

B. Zhou, Y. Yang, M.A. Reuter, U.M.J. Boin, Modelling of aluminium scrap melting in a rotary furnace, Minerals Engineering, Vol.19 No.3, 2006

Y. Chen, Q. Feng, Y. Shao, G. Zhang, L. Ou, Y. Lu, Research on the recycling of valuable metals in spent Al₂O₃-based catalyst, Minerals Engineering, Vol.19 No.1, 2006

P.E. Tsakiridis, S. Agatzini-Leonardou, Solvent extraction of aluminium in the presence of cobalt, nickel and magnesium from sulphate solutions by Cyanex 272. Hydrometallurgy, Vol.80 No.1-2, 2005

Hop, J., et al, Chemical and physical changes of cathode carbon by aluminium electrolysis, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Thonstad, J., and Rolseth, S., Alternative electrolyte compositions for aluminium electrolysis, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Boin, U. M. J. Bertram, M., Melting Standardized Aluminum Scrap: A Mass Balance Model for Europe. JOM, Vol.57 No.8, 2005

Evans, J. Kvande, H., The Role of Technology in the Global Primary Aluminum Industry Today and in the Future. JOM, Vol.57 No.8, 2005

E. Murad, Characterization of a standard bauxite and its deferration products by Mossbauer spectroscopy, Minerals Engineering, Vol.18 No.9, 2005

R.H. Matjie, M.S. Scurrell, J. Bunt, The selective dissolution of alumina, cobalt and platinum from a calcined spent catalyst using different lixiviants, Minerals Engineering, Vol.18 No.8, 2005

S.J. Freij, G.M. Parkinson, Surface morphology and crystal growth mechanism of gibbsite in industrial Bayer liquors. Hydrometallurgy, Vol.78 No.3-4, 2005

F. Marias, H. Roustan, A. Pichat, Modelling of a rotary kiln for the pyrolysis of aluminium waste, Chemical Engineering Science, Vol.60 No.16, 2005

Brisson, P.-Y. Soucy, G. Fafard, M. Dionne, M., The Effect of Sodium on the Carbon Lining of the Aluminum Electrolysis Cell-A Review. Canadian Metallurgical Quarterly, Vol.44 No.2, 2005

Su Zhao, Shiwen Bi, Xiangqun Ding and Zhifang Tong, Influences of novel surfactants on the physicochemical properties of sodium aluminate solution relevant to the aluminium hydroxide precipitation process, Mineral Processing and Extractive Metallurgy, Vol.114 No.1, 2005

Paramguru, R.K., et al, Trends in red mud utilization- a review. Mineral Processing and Extractive Metallurgy Review, Vol.26 No.1, 2005

J. Hyun, S. Endoh, K. Masuda, H. Shin, H. Ohya, Reduction of chlorine in bauxite residue by fine particle separation, International Journal of Mineral Processing, Vol.76 No.1-2, 2005

A. Agrawal, Effluent treatment and by-product recovery from the sludge of an alumina plant, Minerals Engineering, Vol.18 No.4, 2005

Stamboliadis, E.T., and Kailis, G., Removal of limestone from bauxite by magnetic separation. European Journal of Mineral Processing and Environmental Protection, Vol.4 No.2, 2004

Boin, U. Reuter, M. A. Probst, T., Measuring - Modelling: Understanding the Al Scrap Melting Processes Inside a Rotary Furnace. Erzmetall, Vol.57 No.5, 2004

Iffert, M. Heime, A., "9-Box-Control" for an Optimised Aluminium Smelting Process. Erzmetall, Vol.57 No.5, 2004

Hunt, W. H., The China Factor: Aluminum Industry Impact. JOM, Vol.56 No.9, 2004

Ayhan, F.D., Bayat, O., and Poole, C., The beneficiation of Bitlis Massif kyanite ore for use in ceramic materials. Mineral Processing and Extractive Metallurgy, Vol.113 No.2, 2004

D. Panias, Role of boehmite/solution interface in boehmite precipitation from supersaturated sodium aluminate solutions. Hydrometallurgy, Vol.74 No.3-4, 2004

Z. Xu, V. Plitt, Q. Liu, Recent advances in reverse flotation of diasporic ores - A Chinese experience., Minerals Engineering, Vol.17 No.9-10, 2004

Shi, Z. N. Xu, J. L. Qiu, Z. X., Fabrication and Test of Metal Matrix Composites as Advanced Anodes for Aluminum Electrolysis. Canadian Metallurgical Quarterly, Vol.43 No.2, 2004

I. Nikolic, D. Blecic, N. Blagojevic, V. Radmilovic, K. Kovacevic, Influence of oxalic acid on the kinetics of Al(OH)3 growth from caustic soda solutions. Hydrometallurgy, Vol.74 No.1-2, 2004

B. Whittington, D. Ilievski, Determination of the gibbsite dehydration reaction pathway at conditions relevant to Bayer refineries. Chemical Engineering Journal, Vol.98 No.1-2, 2004

Y. Wang, Y. Hu, P. He and G. Gu, Reverse flotation for removal of silicates from diasporic-bauxite. Minerals Engineering, Vol.17 No.1, 2004

H.J. Shin, S.O. Lee, S.J. Kim, T. Tran, M.J. Kim, Study on the effect of humate and its removal on the precipitation of aluminium trihydroxide from the Bayer process. Minerals Engineering, Vol.17 No.3, 2004

H. Kahn, M.M.L. Tassinari, G. Ratti, Characterization of bauxite fines aiming to minimize their iron content. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

Y. Hu, X. Liu, Z. Xu. Role of crystal structure in flotation separation of diaspore from kaolinite, pyrophyllite and illite. Minerals Engineering, Vol.16, No.3, 2003

C. Solisio, A. Lodi, F. Veglio. Bioleaching of zinc and aluminium from industrial waste sludges by means of Thiobacillus ferrooxidans. Waste Management, Vol.22 No.6, 2002

Y. Xiao, M.A. Reuter. Recycling of distributed aluminium turning scrap. Minerals Engineering, Vol.15, No.11 (supplement), 2002

Authier-Martin, M. Forte, G. Ostap, S. See, J., The Mineralogy of Bauxite for Producing Smelter-Grade Alumina. JOM, Vol. 53 No.12, 2001

M. Kanungo, V. Chakravarty, K.G. Mishra, S.C. Das. Influence of perchloric acid on the kinetics of immersion plating of copper onto aluminium. Hydrometallurgy, Vol.61 No.1, 2001

J. Kano, H. Mio, F. Saito, M. Miyazaki. Correlation of grinding rate of gibbsite with impact energy in tumbling mill with mono-size balls. Minerals Engineering, Vol.14, No.10, 2001

S.S. Vasan, J.M. Modak, K.A. Natarajan. Some recent advances in the bioprocessing of bauxite. Int. J. Mineral Processing, Vol.62, No.1-4, 2000

C. Frances, N. Le Bolay, K. Belaroui, M.N. Pons. Particle morphology of ground gibbsite in different grinding environments. Int. J. Mineral Processing, Vol.61, No.1, 2000

J.M. Modak, S.S. Vasan and K.A. Natarajan. Calcium removal from bauxite using Paenibacillus polymyxa. Minerals and Metallurgical Processing, Vol. 16 No.4, Nov. 1999

K Belaroui, MN Pons. Wet grinding of gibbsite in a bead-mill. Powder Technology, Vol.105 No.1-3, Nov. 1999