Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Lwamba, E., and Garbers-Craig, A.M., Control of the grain size distribution of the raw material mixture in the production of iron sinter, Journal of the South African Institute of Mining and Metallurgy, Vol.108, No.5, 2008

Kumar, M., and Patel, S.K., Characteristics of Indian non-coking coals and iron ore reduction by their chars for directly reduced iron production, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.3, 2008

Chowdhury, G.M., et al, Reduction kinetics of iron ore-graphite composite pellets in a packed-bed reactor under inert and reactive atmospheres, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Bahgat, M., and Ahmed, Y.M.Z., Synthesis of nanocrystalline metallic iron from secondary iron oxide resources, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.1, 2008

S.P.E. Forsmo, S.-E. Forsmo, P.-O. Samskog and B.M.T. Bjorkman, Mechanisms in oxidation and sintering of magnetite iron ore green pellets, Powder Technology, Vol.183 No.2, 2008

T.C. Ooi, E. Aries, B.C.R. Ewan, D. Thompson, D.R. Anderson, R. Fisher, T. Fray and D. Tognarelli, The study of sunflower seed husks as a fuel in the iron ore sintering process, Minerals Engineering, Vol.21 No.2, 2008

Kumar, M., et al, Characterization of properties and reduction behaviour of iron ores for application in sponge ironmaking, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.2, 2008

Anghelina, D., et al, High temperature behaviour of directly reduced iron fines, Canadian Metallurgical Quarterly, Vol.46 No.4, 2007

Lovel, R., et al, Iron ore sintering with charcoal, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Firth, A.R., Interactions among magnetite oxidation, calcination of carbonate minerals and melt formation in iron ore pellets, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Hida, Y., and Nosaka, N., Evaluation of iron ore fines from the viewpoint of their metallurgical properties in the sintering process, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

K. Piotrowski, K. Mondal, T. Wiltowski, P. Dydo and G. Rizeg, Topochemical approach of kinetics of the reduction of hematite to wustite, Chemical Engineering Journal, Vol.131, No.1-3, 2007

Magalhaes, M.S., et al, Types of goethite from Quadrilatero Ferrifero's iron ores and their implications in the sintering process, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.1, 2007

Anameric, B., and Kawatra, S.K., Conditions for making direct reduced iron, transition direct reduced iron and pig iron nuggets in a laboratory furnace- temperature-time transformations, Minerals & Metallurgical Processing, Vol.24 No.1, 2007

P. Pourghahramani and E. Forssberg, Effects of mechanical activation on the reduction behavior of hematite concentrate, International Journal of Mineral Processing, Vol.82 No.2, 2007

Singh, M., and Bjorkman, B., Strength of cement-bonded briquettes, Minerals & Metallurgical Processing , Vol.23 No.4, 2006

S.P.E. Forsmo, A.J. Apelqvist, B.M.T. Björkman and P.-O. Samskog, Binding mechanisms in wet iron ore green pellets with a bentonite binder, Powder Technology, Vol.169 No.3, 2006

Anameric, B., et al, Carburization effects on pig iron nugget making, Minerals & Metallurgical Processing, Vol.23 No.3, 2006

Anameric, B., and Kawatra, S.K., Properties and features of direct reduced iron, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.1, 2007

E. Scheepers, J.J. Eksteen and C. Aldrich, Optimisation of the lance injection desulphurisation of molten iron using dynamic modelling, Minerals Engineering, Vol.19 No.11, 2006

F. O'Connor, W.H. Cheung and M. Valix, Reduction roasting of limonite ores: effect of dehydroxylation, International Journal of Mineral Processing, Vol.80 No.2-4, 2006

J. Moon and V. Sahajwalla, Investigation into the Role of the Boudouard Reaction in Self-Reducing Iron Oxide and Carbon Briquettes, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

I. Sohn and R.J. Fruehan, The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part II. The Reduction of Iron Oxide/Carbon Composites, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

I. Sohn and R.J. Fruehan, The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part III. The Simulation of Volatile Reduction in a Multi-Layer RHF Process, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

Mourao, M.B., et al, Kinetic compensation effect on the carbothermic reduction of iron oxides, Canadian Metallurgical Quarterly, Vol.45 No.2, 2006

Aslanoglu, Z., Direct reduction of mechanically activated specular iron oxide, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

S.P.E. Forsmo, J.P. Vuori, The determination of porosity in iron ore green pellets by packing in silica sand, Powder Technology, Vol.159 No.2, 2005

Manamela, M.M., and Pistorius, P.C., Ore size does affect direct reduction of titaniferous magnetite. Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.3, 2005

Chellan, R., et al, Direct reduction of mixed magnetite and coal pellets using induction heating. Mineral Processing and Extractive Metallurgy Review, Vol.26 No.1, 2005

J. Trescot, D. Connor, B. Faulkner, F. Beloy and S. Vogely, Application of ported kiln technology to the Grate-Kiln Process at Minntac. Minerals & Metallurgical Processing, Vol.21 No.4, 2004

Tee, J.K.S., and Fray, D.J., Reaction of zinc, copper and iron in air and chlorine mixtures. Minerals Processing and Extractive Metallurgy, Vol.113 No.3, 2004

D.R. Parisi, M.A. Laborde, Modeling of counter current moving bed gas-solid reactor used in direct reduction of iron ore., Chemical Engineering Journal, Vol.104 No.1-3, 2004

P.K. Abraitis, R.A.D. Pattrick, D.J. Vaughan, Variations in the compositional, textural and electrical properties of natural pyrite: a review., International Journal of Mineral Processing, Vol.74 No.1-4, 2004

Y. Topkaya, N. Sevinc, A. Gunaydin, Slag treatment at Kardemir integrated iron and steel works., International Journal of Mineral Processing, Vol.74 No.1-4, 2004

Abdenouri, N., et al, Characterization of products and analysis of sulfur vaporization from an iron sulfide ore. Mineral Processing and Extractive Metallurgy Review, Vol.25 No.4, 2004

Ripke, S. J. Kawatra, S. K., Bentonite binder effective strength (BESt) test for unfired iron ore pellets. Minerals and Metallurgical Processing, Vol.21 No.2, 2004

Basdag, A., and Arol, A.I., Behaviour of oversize particles in iron ore balling. CIM Bulletin, Vol. 97 No.1079, 2004

Khaki, J.V., et al, The effect of mechanical milling on the carbothermic reduction of hematite. Mineral Processing and Extractive Metallurgy Review, Vol.25 No.1, 2004

Kawatra, S. K. Ripke, S. J., Sintering of magnetite pellets under oxidizing, neutral and reducing atmospheres. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Hanninen, M. J. Seppanen, T. E. Sundberg, C. R. Suardini, P. J., Internal carbon addition during hematite fluxed pellet production at the Tilden Mine. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Khosa, J., Manuel, J., and Trudu, A., Results from preliminary investigation of particulate emission during sintering of iron ore. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, 2003

M. Sacramento de Magalhaes, P. Roberto Gomes Brandao, Microstructures of industrial sinters from Quadrilatero Ferrifero's iron ores, Minas Gerais State, Brazil. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

E. Eneroth, C. Bender Koch, Crystallite size of haematite from thermal oxidation of pyrite and marcasite--effects of grain size and iron disulphide polymorph. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

C. E. Loo and G. C. Penny. Granulation behaviour of iron ore blends containing coarse, porous ore. Trans.Instn Min. Metall. (Sect, C), Vol. 107, Sept-Dec. 1998.