Full papers of hyperlinked titles can be downloaded via ScienceDirect.

A. Parodi, T. Vincent, M. Pilsniak, A.W. Trochimczuk, E. Guibal, Palladium and platinum binding on an imidazol containing resin, Hydrometallurgy, Vol. 92, No.1-2, 2008

B.A. Moore, J.R. Duncan and J.E. Burgess, Fungal bioaccumulation of copper, nickel, gold and platinum, Minerals Engineering, Vol. 21, No. 1, 2008

C.L. Mack, B. Wilhelmi, J.R. Duncan and J.E. Burgess, A kinetic study of the recovery of platinum ions from an artificial aqueous solution by immobilized Saccharomyces cerevisiae biomass, Minerals Engineering, Vol. 21, No. 1, 2008

M.K.G. Vermaak, J.D. Miller and J. Lee, Electrochemical interactions of industrially important platinum-containing minerals, Minerals Engineering, Vol.20 No.15, 2007

J.H. Brits and D.A. Deglon, Palladium stripping rates in PGM refining , Hydrometallurgy, Vol.89 No.3-4, 2007

N.J. Shackleton, V. Malysiak and C.T. O'Connor, Surface characteristics and flotation behaviour of platinum and palladium arsenides, International Journal of Mineral Processing, Vol.85 No.1-3, 2007

N.J. Shackleton, V. Malysiak and C.T. O'Connor, Surface characteristics and flotation behaviour of platinum and palladium tellurides, Minerals Engineering, Vol.20 No.13, 2007

T.A. Grammatikopoulos, A. Kapsiotis, F. Zaccarini, B. Tsikouras, K. Hatzipanagiotou and G. Garuti, Investigation of platinum-group minerals (PGM) from Pindos chromitites (Greece) using hydroseparation concentrates, Minerals Engineering, Vol.20 No.12, 2007

M.K.G. Vermaak, P.C. Pistorius and J.A. Venter, Fundamental electrochemical and Raman spectroscopic investigations of the flotation behaviour of PtAs₂, Minerals Engineering, Vol.20 No.12, 2007

Y.F. Shen and W.Y. Xue, Recovery palladium, gold and platinum from hydrochloric acid solution using 2-hydroxy-4-sec-octanoyl diphenyl-ketoxime, Separation and Purification Technology, Vol.56 No.3, 2007

J. Wiese, P. Harris and D. Bradshaw, The response of sulphide and gangue minerals in selected Merensky ores to increased depressant dosages, Minerals Engineering, Vol.20 No.10, 2007

Westcott, G., et al, Impala Platinum Smelter, Rustenburg- an integrated smelter off-gas treatment solution, Journal of Southern African IMM, Vol.107 No.5, 2007

A.B. Boricha, H.C. Bajaj, P.K. Ghosh and R.V. Jasra, Recovery of palladium from palladium phthalocyanine complex adsorbed on silica, Hydrometallurgy, Vol.87 No.3-4, 2007

Yu, J., The separation and refining technologies of precious metals, Platinum Metals Review, Vol.51 No.2, 2007

K.A. Venkatesan, B.R. Selvan, M.P. Antony, T.G. Srinivasan and P.R.V. Rao, Extraction of palladium (II) from nitric acid medium by imidazolium nitrate immobilized resin, Hydrometallurgy, Vol.86 No.3-4, 2007

I. Jordaan, R. Pieters, L.P. Quinn, J.P. Giesy, P.D. Jones, M.B. Murphy and H. Bouwman, The contribution of dioxin-like compounds from platinum mining and processing samples, Minerals Engineering, Vol.20 No.2, 2007

M. Regel-Rosocka, M. Wisniewski, A. Borowiak-Resterna, A. Cieszynska and A.M. Sastre, Selective extraction of palladium(II) from hydrochloric acid solutions with pyridinecarboxamides and ACORGA(R)CLX50, Separation and Purification Technology, Vol.53 No.3, 2007

K. Huang, et al, Enrichment of Platinum Group Metals (PGMs) by Two-State Selective Pressure Leaching Cementation from Low-Grade Pt-Pd Sulfide Concentrates, Metallurgical & Materials Transactions B , Vol.37B No.5, 2006

Z. Hubicki, M. Leszczynska, B. Lodyga and A. Lodyga, Palladium(II) removal from chloride and chloride-nitrate solutions by chelating ion-exchangers containing N-donor atoms, Minerals Engineering, Vol.19 No.13, 2006

M.V. Rane and V. Venugopal, Study on the extraction of palladium(II) and platinum(IV) using LIX 84I, Hydrometallurgy, Vol.84 No.1-2, 2006

M. Mohan Raj, A. Dharmaraja, K. Panchanatheswaran, K.A. Venkatesan, T.G. Srinivasan and P.R. Vasudeva Rao, Extraction of fission palladium(II) from nitric acid by benzoylmethylenetriphenylphosphorane (BMTPP), Hydrometallurgy, Vol.84 No.1-2, 2006

Abughusa, A., et al, Extraction of precious metal ions from simulated mine effluents using a nanostructured adsorbent, Canadian Metallurgical Quarterly, Vol.45 No.3, 2006

Lamya, R.M., and Lorenzen, L., Atmospheric acid leaching of nickel-copper matte from Impala Platinum Refineries, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.6, 2006

J. Chen and K. Huang, A new technique for extraction of platinum group metals by pressure cyanidation, Hydrometallurgy, Vol.82 No.3-4, 2006

C.S. Kedari, M.T. Coll, A. Fortuny, E. Goralska and A.M. Sastre, Recovery and partitioning of Ir(IV) and Ru(III) from chloride solutions by solvent extraction using Cyanex 923/kerosene, Hydrometallurgy, Vol.82 No.1-2, 2006

A. Zhang, E. Kuraoka and M. Kumagai, Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials, Separation and Purification Technology, Vol.50 No.1, 2006

Coetzee, V., Common-sense improvements to electric smelting at Impala Platinum, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.3, 2006

A.J.H. Newell, D.J. Bradshaw and P.J. Harris, The effect of heavy oxidation upon flotation and potential remedies for Merensky type sulfides, Minerals Engineering, Vol.19 No.6-8, 2006

Cabri, L.J. et al, Hydroseparation: a new development in process mineralogy of platinum-bearing ores, CIM Magazine, Vol.1 No.1, 2006

J. Kramer, N.E. Dhladhla, K.R. Koch, Guanidinium functionalised silica-based anion exchangers significantly improve the selectivity of platinum group metal recovery from process solutions , Separation and Purification Technology, Vol.49 No.2, 2006

J. Vinals, E. Juan, M. Ruiz, E. Ferrando, M. Cruells, A. Roca, J. Casado, Leaching of gold and palladium with aqueous ozone in dilute chloride media, Hydrometallurgy, Vol.81 No.2, 2006

A.J. du Toit, P. Gaylard, S. Jahanshahi, J. Nell, Iron redox-equilibria and sulphide capacity of PGM melter-type slags, Minerals Engineering, Vol.19 No.3, 2006

K.S. McIntosh, D. Auer, K.R. Koch, J.J. Eksteen, Integrating pyrometallurgy and robotic systems engineering: Fully automated fire assay laboratory for rapid PGE analysis, Minerals Engineering, Vol.19 No.3, 2006

Z. Ekmekci, D.J. Bradshaw, P.J. Harris, A.M. Buswell, Interactive effects of the type of milling media and copper sulphate addition on the flotation performance of sulphide minerals from Merensky ore Part I: Pulp chemistry , International Journal of Mineral Processing, Vol.78 No.3, 2006

Z. Ekmekci, D.J. Bradshaw, P.J. Harris, A.M. Buswell, Interactive effects of the type of milling media and CuSO₄ addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability , International Journal of Mineral Processing, Vol.78 No.3, 2006

P. Giridhar, K.A. Venkatesan, T.G. Srinivasan, P.R. Vasudeva Rao, Extraction of fission palladium by Aliquat 336 and electrochemical studies on direct recovery from ionic liquid phase, Hydrometallurgy, Vol.81 No.1, 2006

Andrews. L., Factors affecting nickel recovery from slags produced during platinum smelting, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

L.J. Cabri, M. Beattie, N.S. Rudashevsky, V.N. Rudashevsky, Process mineralogy of Au, Pd and Pt ores from the Skaergaard intrusion, Greenland, using new technology, Minerals Engineering, Vol.18 No.8, 2005

R.H. Matjie, M.S. Scurrell, J. Bunt, The selective dissolution of alumina, cobalt and platinum from a calcined spent catalyst using different lixiviants, Minerals Engineering, Vol.18 No.8, 2005

J. Wiese, P. Harris, D. Bradshaw, Investigation of the role and interactions of a dithiophosphate collector in the flotation of sulphides from the Merensky reef, Minerals Engineering, Vol.18 No.8, 2005

E. Nel, M. Valenta, N. Naude, Influence of open circuit regrind milling on UG-2 ore composition and mineralogy at Impala's UG-2 concentrator, Minerals Engineering, Vol.18 No.8, 2005

M.P. Hay, G. Schroeder, Use of the SUPASIM flotation model in optimising Impala's UG2 circuit, Minerals Engineering, Vol.18 No.8, 2005

Z. Ekmekci, M.A. Buswell, D.J. Bradshaw, P.J. Harris, The value and limitations of electrochemical measurements in flotation of precious metal ores, Minerals Engineering, Vol.18 No.8, 2005

D.A. Deglon, The effect of agitation on the flotation of platinum ores, Minerals Engineering, Vol.18 No.8, 2005

J.D. Miller, J. Li, J.C. Davidtz, F. Vos, A review of pyrrhotite flotation chemistry in the processing of PGM ores, Minerals Engineering, Vol.18 No.8, 2005

D. Jafarifar, M.R. Daryanavard, S. Sheibani, Ultra fast microwave-assisted leaching for recovery of platinum from spent catalyst. Hydrometallurgy, Vol.78 No.3-4, 2005

Martinovic, J., et al, Investigation of surface properties of gangue minerals in platinum bearing ores. Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.3, 2005

Mainza, A., et al, A comparison of different cyclones in addressing challenges in the classification of the dual density UG2 platinum ore. Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.3, 2005

Yoon, H., et al, Quantitative analysis of platinum group metals using X-ray fluorescence spectrometry, Minerals & Metallurgical Processing, Vol.22 No.2, 2005

M.K.G. Vermaak, P.C. Pistorius, J.A. Venter, Electrochemical and Raman spectroscopic studies of the interaction of ethyl xanthate with Pd-Bi-Te, Minerals Engineering, Vol.18 No.6, 2005

Yoon, H., et al, Quantitative determination of PGM using ICP-MS, ICP-MS, ICP-AES, AAS and XRF, Minerals & Metallurgical Processing, Vol.22 No.1, 2005

Quinet, P., et al, Recovery of precious metals from electronic scrap by hydrometallurgical processing routes, Minerals & Metallurgical Processing, Vol.22 No.1, 2005

Potgieter, J.H., Small-scale recovery of noble metals from jewellery wastes, Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.10, 2005

J. Wiese, P. Harris, D. Bradshaw, The influence of the reagent suite on the flotation of ores from the Merensky reef, Minerals Engineering, Vol.18 No.2, 2005

Cramer, L.A., Basson, J., and Nelson, L.R., The impact of platinum production from UG2 ore on ferrochrome production in South Africa. J. South African IMM, Vol. 104 No 9, 2004

Jones, R. T., JOM World Nonferrous Smelter Survey, Part II: Platinum Group Metals. JOM, Vol.56 No.12, 2004

Edtmaier, C. Svec, P. Disam, J., Refining Behavior of Platinum by Pyrometallurgical Means. Erzmetall, Vol.57 No.6, 2004

Green, B.R., et al, Leaching and recovery of platinum group metals from UG-2 concentrates. J. South African IMM, Vol.104 No.6, 2004

Bryson, M.A.W., New technologies in the concentration of PGM values from UG-2 ores. J. South African IMM, Vol.104 No.6, 2004

Bryson, M.A.W., Mineralogical control of minerals processing circuit design. J. South African IMM, Vol.104 No.6, 2004

Nell, J., Melting of platinum group metal concentrates in South Africa. J. South African IMM, Vol. 104 No 7 (2004)

Edtmaier, C. Svec, P., The Role of Reactions Between Crucible and Melt During Refining of Platinum by Vacuum Induction Melting. Canadian Metallurgical Quarterly, Vol.43 No.3, 2004

Z. Xiao, A.R. Laplante, Characterizing and recovering the platinum group minerals - a review., Minerals Engineering, Vol.17 No.9-10, 2004

A.A. de Sa Pinheiro, T.S. de Lima, P.C. Campos, J.C. Afonso, Recovery of platinum from spent catalysts in a fluoride-containing medium. Hydrometallurgy, Vol.74 No.1-2, 2004

de Vargas I.; Macaskie L.E.; Guibal E., Biosorption of palladium and platinum by sulfate-reducing bacteria. Journal of Chemical Technology & Biotechnology, Vol.79 No.1, 2004

M.A. Barakat, M.H.H. Mahmoud, Recovery of platinum from spent catalyst. Hydrometallurgy, Vol.72 No.3-4, 2004

Breytenbach, W., Vermaak, M.K.G., and Davidtz, J.C., Synergistic effects among dithiocarobonates (DTC), dithiophosphate (DTP) and trithiocarbonates (TTC) in the flotation of Merensky ores. J. South African IMM, Vol.103 No.10, 2003

L. Zou, J. Chen, Y. Huang, An alternative way to separating Ir(IV) and Rh(III) ions from a mixed chloride solution with added stannous chloride. Hydrometallurgy, Vol.72 No.1-2, 2004

S. Bulatovic, Evaluation of alternative reagent schemes for the flotation of platinum group minerals from various ores. Mineral Engineering, Vol.16 No.10, 2003

S. Gornostayev, T. Mutanen, The platinum-group minerals in chromitites of the Akanvaara deposit, Northern Finland and in their processing products. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

A.M. Buswell, D.J. Bradshaw, P.J. Harris, Z. Ekmekci. The use of electrochemical measurements in the flotation of a platinum group minerals (PGM) bearing ore. Minerals Engineering, Vol.15, No.6, 2002

Cramer, L.A., The extractive metallurgy of South Africa's platinum ores. JOM, Vol. 53 No. 10, 2001

Benson, M., et al, Collector-metal behaviour in the recovery of platinum-group metals from catalytic converters. Trans. IMM Sect. C Vol. 109, Jan.-April 2000

DA Deglon, D Egya-Mensah, JP Franzidis. Review of hydrodynamics and gas dispersion in flotation cells on South African platinum concentrators. Minerals Engineering, Vol.13, No.3, 2000