A safe, rapid and environmentally friendly method of measuring coal density has won the Australian coal industry’s prestigious ACARP research excellence award in coal preparation for 2002.

Developed by the University of Queensland’s Julius Kruttschnitt Mineral Research Centre, the UltraSort JK Pycnometer supersedes a laboratory-based heavy liquid technique, and the associated health and chemical disposal risks posed by the old method. JKMRC researchers Dr Geoff Lyman and Andrew Jonkers won the award for their pycnometer, a technical innovation resulting from the ACARP-funded ‘Safe, Rapid Coal Washability Assessment’ project.

Australian Coal Research Ltd's Executive Director Mr Ross McKinnon, left, congratulates JKMRC Principal Research Fellow Dr Geoff Lyman on receiving the 2002 ACARP coal preparation award for the 'Safe, Rapid Coal Washability Assessment' project

The JKMRC’s innovation was selected from 160 current projects administered by the Australian Coal Association Research Program for the Australian coal industry.

The commercial UltraSort JK Pycnometer

The award to the JKMRC was one such example where the use of organic heavy liquids for float-sink testing had caused increasing concern over potential health hazards. Dr Lyman explained that the new pycnometer has the capability of analysing 30 particles a minute, equating to the required 3000 particles in 100 minutes to get an accurate measure of the density or washability distribution. Use of the instrument is at present confined to particles greater than four millimetres.

“It is now possible to put 3000 or so particles into the feed hopper of the machine, choose the density fractions into which the particles are to be stored, start the machine and come back an hour and a half later and collect the results.” He said the speed of the new pycnometer is quite remarkable: “Future models may work even faster.”

During his 28 years as researcher with the coal and minerals processing sector of the mining industry, Dr Lyman realised that one of the major problems in assessing gravity separation processes is an inability to rapidly and safely measure the density distribution of particles. “For gravity processes, the density is the most important characterisation of the mineral to be fed to the separation process,” he said. “It is on the basis of a coal or mineral particle’s density distribution that they are going to be separated, and this particle by particle density information is absolutely invaluable it’s critical to the whole gravity separation process.”

Dr Lyman said that while the pycnometer had been developed to eliminate the use of toxic heavy liquids in the analysis of coal samples, another beneficiary of the technology would be the mineral industry, particularly iron ore and manganese, and anywhere else that gravity processes were used. “The development of a rapid computerised gas pycnometer for the determination of individual particle densities really marks a genuine breakthrough in laboratory instrumentation and analysis equipment for the mineral industry,” he said. “Iron ore and non-coal users will now be capable of carrying out very quickly, rapidly and safely densimetric determinations on samples which have never really been possible before.”

The pycnometer has subsequently been licensed for manufacture and sale to Sydney-based sorting machine company UltraSort Pty Ltd through the JKMRC’s commercial subsidiary JKTech Pty Ltd.

Contact:
Dr Geoff Lyman
g.lyman@mailbox
.uq.edu.au

The JKMRC has a