|
MEI Online: Refereed Publications: Materials Handling |
Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003
L. Frye, W. Peukert, Transfer of fracture mechanical concepts to bulk solids attrition in pneumatic conveying., International Journal of Mineral Processing, Vol.74 No.1001, 2004 K. Ekambara, J.B. Joshi, Axial mixing in laminar pipe flows, Chemical Engineering Science, Vol.59 no.18, 2004 D. McGlinchey, Quantifying segregation in heaps: an experimental study., Powder Technology, Vol.145 No.2, 2004 L. Nikiforaki, J. Yu, S. Baldi, B. Genenger, K.C. Lee, F. Durst, M. Yianneskis, On the variation of precessional flow instabilities with operational parameters in stirred vessels., Chemical Engineering Journal, Vol.102 No.3, 2004 G. Lodewijks and J.A. Ottjes, Reliability of Large Scale Bulk Material Handling Systems. Bulk Solids & Powder Science & Technology, Vol.1 No.1, 2004 A.W. Roberts, Predicting Abrasive Wear in Enclosed Screw Conveyors. Bulk Solids & Powder Science & Technology, Vol.1 No.1, 2004 D. McGlinchey, J. Xiang, A. Cowell, L. Frye and W. Peukert, The Prediction of Contact Forces During Dense Phase Pneumatic Conveying. Bulk Solids & Powder Science & Technology, Vol.1 No.1, 2004 F. Scargiali, F. Grisafi, J. Cermakova, V. Machon, A. Brucato, Residence time distribution of solid particles in a continuous, high-aspect-ratio multiple-impeller stirred vessel., Chemical Engineering Science, Vol.59 No.17, 2004 D. Pinelli, G. Montante, F. Magelli, Dispersion coefficients and settling velocities of solids in slurry vessels stirred with different types of multiple impellers., Chemical Engineering Science, Vol.59 No.15, 2004 K. Zhu, S. Madhusudana Rao, Q. He Huang, C.-H. Wang, S. Matsusaka, H. Masuda, On the electrostatics of pneumatic conveying of granular materials using electrical capacitance tomography., Chemical Engineering Science, Vol.59 No.15, 2004 Pan, X.W., et al, Development of weightometer soft sensor. Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.5, 2004 D.L. Schott, L. Arjen van Wijk, W.J. Vlasblom, Compression in mammoth silos - The influence of compression on large-scale homogenization., Powder Technology, Vol.142 No.2-3, 2004 A. Drescher, M. Ferjani, Revised model for plug/funnel flow in bins. Powder Technology, Vol.141 No.1-2, 2004 Keller, M., Conveyer belts with optimized energy consumption cut costs. Bulk Solids Handling, Vol.24 No.1, 2004 S. Fokeer, S. Kingman, I. Lowndes, A. Reynolds, Characterisation of the cross sectional particle concentration distribution in horizontal dilute flow conveying-a review [review article]. Chemical Engineering and Processing, Vol.43 No.6, 2004 D. Eskin, Y. Leonenko, O. Vinogradov, Theoretical estimates of air bubble behavior in dense pipeline slurry flows. Chemical Engineering and Processing, Vol.43 No.6, 2004 Lodewijks, G., Strategies for automated maintenance of belt conveyor systems. Bulk Solids Handling, Vol.24 No.1, 2004 Rengifo, P.E., New splice assembly technique for wire reinforced belting. Bulk Solids Handling, Vol.24 No.1, 2004 Chou, C.S., and Chen, Y.W., Study of flow patterns in an inclined moving granular bed. Bulk Solids Handling, Vol.24 No.1, 2004 Dittrich, W., et al, Tooth flank damage in conveyor gears. Bulk Solids Handling, Vol.24 No.1, 2004 D. Eskin, Y. Leonenko, O. Vinogradov, On a turbulence model for slurry flow in pipelines. Chemical Engineering Science, Vol.59 No.3, 2004
|
|
© 1998-2021, Minerals Engineering International Email: amanda@min-eng.com |