Home |  News |  Conferences |  Commodities |  Publications |  Business Directory |  Resources |  Help
Go to the MEI Online homepage

 
Search Site:

MEI Online: Pyrometallurgy: Refereed Publications

 
 

click to find out about MEI Conferences

  

Choose a year: 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

 

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

ScienceDirect

 

Stephens, R.L., Advances in furnace integrity- partly a materials engineering problem. JOM, Vol.57 No.10, 2005

Fuwa, A., and Takaya, S., Producing titanium by reducing TiCl4-MgCl2 mixed salt with magnesium in the molten state. JOM, Vol.57 No.10, 2005

Fourie, D.J., et al, Calculation of FeO-TiO2-Ti2O3 liquidus isotherms pertaining to high titania slags, Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.10, 2005

Maree, J., et al, Sulphur from smelter gases and sulphate-rich effluents, Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.9, 2005

Syamujulu, M., A technical and operational audit of the first ten years of the Teniente converter operations at Nkana smelter, Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.9, 2005

Aslanoglu, Z., Direct reduction of mechanically activated specular iron oxide, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

Zhu, F., et al, Volatilisation kinetics of Sb2S3 from PbS-Sb2S3 melt, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

Shivakumar, I, et al, A kinetic model for the prediction of water reporting to the froth products in batch flotation, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

Dey, S., Flotation responses of Godwana coal in release analysis, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

T. Yoshikawa and K. Morita, Removal of B from Si by Solidification Refining with Si-Al Melts. Metallurgical & Materials Transactions B, Vol.36B No.12, 2005

T. Yoshikawa, K. Arimura, and K. Morita, Boron Removal by Titanium Addition in Solidification Refining of Silicon with Si-Al Melt. Metallurgical & Materials Transactions B, Vol.36B No.12, 2005

J.M. Floyd, Converting an Idea into a Worldwide Business Commercializing Smelting Technology. Metallurgical & Materials Transactions B, Vol.36B No.5, 2005

M.A. Rhamdhani, K.S. Coley, and G.A. Brooks, Analysis of the Source of Dynamic Interfacial Phenomena during Reaction between Metal Droplets and Slag. Metallurgical & Materials Transactions B, Vol.36B No.5, 2005

I. Sohn and R.J. Fruehan, The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part I. The Role and Kinetics of Volatile Reduction. Metallurgical & Materials Transactions B, Vol.36B No.5, 2005

A. Kondratiev and E. Jak, A Quasi-Chemical Viscosity Model for Fully Liquid Slags in the Al2O3-CaO-FeO-SiO2 System. Metallurgical & Materials Transactions B, Vol.36B No.5, 2005

S.A. Sayed, K.A. Rabie, I.E. Salama, Studies on europium separation from a middle rare earth concentrate by in situ zinc reduction technique, Separation and Purification Technology, Vol.46 No.3, 2005

Schmitz, W. Trauzeddel, D., Saving Energy in Melting Copper Materials in State-of-the-Art Induction Furnaces. Erzmetall, Vol.58 No.5, 2005

Zhang, Z., and Reddy, R.G., Structure model and properties of alkali borate melts, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Belashchenko, D.K., and Ostrovski, O.I., Computer modelling of molten halides using diffraction data, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Habashi, F., Fire and the art of metals: a short history of pyrometallurgy, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Pelton, A.D., Thermodynamic models and databases for slags, fluxes and salts, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Wright, S., et al, Activities of Cu, Fe and Ni in Cu-Fe-Ni-S mattes, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Font, J.M., and Reddy, R.G., Modelling of antimonate capacity in copper and nickel smelting slags, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Hansson, R., et al, Phase equilibria in the Fe-Zn-O system at conditions relevant to zinc sintering and smelting, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Imris, I., et al, Copper losses to slags obtained from the El Teniente process, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

Andrews. L., Factors affecting nickel recovery from slags produced during platinum smelting, Mineral Processing and Extractive Metallurgy, Vol.114 No.3, 2005

S.P.E. Forsmo, J.P. Vuori, The determination of porosity in iron ore green pellets by packing in silica sand, Powder Technology, Vol.159 No.2, 2005

Antrekowitsch, J. Graller-Kettler, G. Matl, B. Pestalozzi, A., Use of the Flash-Reactor Principle to Recover Zinc from Steel-Mill Dusts. JOM, Vol.57 No.8, 2005

Goonan, T. G., Material flows generated by pyromet copper smelting. Mining Engineering, Vol.57 No.8, 2005

Ng, K. W. Kapusta, J. P. T. Harris, R. Wraith, A. E. Parra, R., Modeling Peirce-Smith Converter Operating Costs. JOM, Vol.57 No.7, 2005

Marin, T. Utigard, T., The Kinetics and Mechanism of Molten Copper Oxidation by Top Blowing of Oxygen. JOM, Vol.57 No.7, 2005

Coursol, P. Davis, B. Roy, A. Lebel, M., Oxygen Removal from Blister Copper by Copper Oxide Formation. JOM, Vol.57 No.7, 2005

Lynch, D. C. Zhong, T., Volatilization and Activity Coefficient of Sb in Cu-Fe Mattes and White Metal, Canadian Metallurgical Quarterly, Vol.44 No.3, 2005

Soltanieh, M. Karimi, Y., Copper Reduction in Anode Furnaces with Natural Gas, Canadian Metallurgical Quarterly, Vol.44 No.3, 2005

Chen, Y. Brooks, G. A. Nightingale, S. A., Slag Line Dissolution of MgO Refractory, Canadian Metallurgical Quarterly, Vol.44 No.3, 2005

L.G. Bergh, P. Chacana, C. Carrasco, Control strategy for a Teniente Converter, Minerals Engineering, Vol.18 No.11, 2005

Bohlke, J. Friedrich, B. Hecker, E., Treatment of Industrial Lead and Zinc Slags in a Pilot Scale SAF. Erzmetall, Vol.58 No.4, 2005

de Villiers, J.P.R., et al, Disintegration in high grade titania slags: low temperature oxidation reactions and associated fracture mechanics of pseudobrookite, Mineral Processing and Extractive Metallurgy, Vol.114 No.2, 2005

Zietsman, J.H., and Pistorius, P.C., Process mechanisms in ilmenite smelting. Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.4, 2005

Manamela, M.M., and Pistorius, P.C., Ore size does affect direct reduction of titaniferous magnetite. Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.3, 2005

F. Marias, H. Roustan, A. Pichat, Modelling of a rotary kiln for the pyrolysis of aluminium waste, Chemical Engineering Science, Vol.60 No.16, 2005

Blazy, P., and Bouhaouss, A., Removal of organic matter in Moroccan Youssoufia phosphate by flash calcination, Minerals & Metallurgical Processing, Vol.22 No.2, 2005

Sohn, H.Y., et al, Sufide smelting fundamentals, technologies and innovations, Minerals & Metallurgical Processing, Vol.22 No.2, 2005

G.J. Finnie, N.P. Kruyt, M. Ye, C. Zeilstra, J.A.M. Kuipers, Longitudinal and transverse mixing in rotary kilns: A discrete element method approach, Chemical Engineering Science, Vol.60 No.15, 2005

Review of pyrometallurgical treatment of electronic scrap. Mining Engineering, Vol.57 No.4, 2005

Chang, K. Irons, G. A. Jiao, Q., A Mathematical Model of a DC Electric Furnace for Recovery of Zinc from Lead Blast Furnace Slag. Canadian Metallurgical Quarterly, Vol.44 No.2, 2005

Amankwah, R. K. Pickles, C. A., Microwave Calcination and Sintering of Manganese Carbonate Ore. Canadian Metallurgical Quarterly, Vol.44 No.2, 2005

D. R. Swinbourne, S. Yan and S. Salim, The solubility of gold in metallurgical slags, Mineral Processing and Extractive Metallurgy, Vol.114 No.1, 2005

Chellan, R., et al, Direct reduction of mixed magnetite and coal pellets using induction heating. Mineral Processing and Extractive Metallurgy Review, Vol.26 No.1, 2005

Akdogan, G., and Eric, R.H., Physical modelling of slag-metal dispersion, Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.10, 2005

Pan, X., and Eric, H., Chromium distribution between slag and non-carbon saturated metal phases under changing partial pressure of carbon monoxide, Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.10, 2005

B.B. Kar, Carbothermic reduction of hydro-refining spent catalyst to extract molybdenum., International Journal of Mineral Processing, Vol.75 No.3-4, 2005

R. Sripriya, C.V.G.K. Murty, Recovery of metal from slag/mixed metal generated in ferroalloy plants-a case study, International Journal of Mineral Processing, Vol.75 No.1-2, 2005

 

   

Click for more info on Comminution '18

Select the list(s) you'd like to join below, enter your email address, choose a content format and click "Join."
[more info]


MEI Online Update
MEI Online Job Vacancies

HTML Text

click for more information

© 1998-2017, Minerals Engineering International


Email: amanda@min-eng.com