Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Taina Kalliomäki, Arif T. Aji, Shila Jafari, Waltteri Leskinen, Benjamin P. Wilson, Jari Aromaa, Mari Lundström, Industrial validation of conductivity and viscosity models for copper electrolysis processes, Minerals Engineering, Vol.171, 2021

Mingxin Li, Binchuan Li, Jianshe Chen, Kuiren Liu, Qing Han, A study of AVR sediment leaching with copper-bearing cyanide effluent and electrowinning recovery of copper, Minerals Engineering, Vol.170, 2021

Shuhua Geng, Hui Dong, Yi Lu, Shujuan Wang, Ying Huang, Xingli Zou, Yuwen Zhang, Qian Xu, Xionggang Lu, Electrolytic production of Cu-Ni alloy from nickel matte through chlorination and deep eutectic solvent leaching-electrodeposition, Separation and Purification Technology, Vol. 242, 2020

Mahjabin Najminoori, Ali Mohebbi, Kambiz Afrooz, Babak Ghadami Arabi, The effect of magnetic field and operating parameters on cathodic copper winning in electrowinning process, Chemical Engineering Science, Vol. 199, 2019

Feifan Li, Mengjun Chen, Jianchen Shu, Mehran Shirvani, Yungui Li, Zhi Sun, Shuhui Sun, ZhongHui Xu, Kaibin Fu, Shu Chen, Copper and gold recovery from CPU sockets by one-step slurry electrolysis, Journal of Cleaner Production, Vol. 213, 2019

X. Liu, Y. He, Z. Zhao, X. Chen, Study on removal of copper from nickel copper mixed solution by membrane electrolysis, Hydrometallurgy, Vol. 180, 2018

X. Wang, X. Wang, B. Liu, M. Wang, H. Wang, X. Liu, S. Zhou, Promotion of copper electrolyte self-purification with antimonic oxides, Hydrometallurgy, Vol. 175, 2018

S. Jafari, M. Kiviluoma, T. Kalliomäki, E. Klindtworth, A. Tirto Aji, J. Aromaa, B.P. Wilson, M. Lundström, Effect of typical impurities for the formation of floating slimes in copper electrorefining, International Journal of Mineral Processing, Vol. 168, 2017

F. Arroyo-Torralvo, A. Rodríguez-Almansa, I. Ruiz, I. González, G. Ríos, C. Fernández-Pereira, L.F. Vilches-Arenas, Optimizing operating conditions in an ion-exchange column treatment applied to the removal of Sb and Bi impurities from an electrolyte of a copper electro-refining plant, Hydrometallurgy, Vol. 171, 2017

M. Nicol, H. Miki, S. Zhang, The anodic behaviour of chalcopyrite in chloride solutions: Voltammetry, Hydrometallurgy, Vol. 171, 2017

X. Wang, X. Wang, M. Wang, Characteristics of BiAsO₄ precipitate formation in copper electrolyte, Hydrometallurgy, Vol. 171, 2017

M. Kuosa, B. Ekberg, L. Tanttu, T. Jauhiainen, A. Häkkinen, Performance comparison of anthracite filter media of different origin in the removal of organic traces from copper electrolyte, International Journal of Mineral Processing, Vol. 163, 2017

D. Majuste, F.C. Bubani, E.L.C. Martins, P.R. Cetlin, V.S.T. Ciminelli, A novel device for testing the mechanical behavior of metal electrodeposits during cathode stripping, Hydrometallurgy, Vol. 169, 2017

J. Su, X. Lin, S. Zheng, R. Ning, W. Lou, W. Jin, Mass transport-enhanced electrodeposition for the efficient recovery of copper and selenium from sulfuric acid solution, Separation and Purification Technology, Vol. 182, 2017

M.J Nicol, V. Tjandrawan, S. Zhang, Cathodic reduction of iron(III) and copper(II) on various sulfide minerals in chloride solutions, Hydrometallurgy, Vol. 166, 2016

P.T. Huyen, T.D. Dang, Mai T. Tung, Nguyen T.T. Huyen, T.A. Green, S. Roy, Electrochemical copper recovery from galvanic sludge, Hydrometallurgy, Vol. 164, 2016

A. Ehsani, E.Y. Yazici, H. Deveci, Influence of polyoxometallates as additive on electro-winning of copper, Hydrometallurgy, Vol. 162, 2016

W. Zeng, J. Werner, M.L. Free, Experimental studies on impurity particle behavior in electrolyte and the associated distribution on the cathode in the process of copper electrorefining, Hydrometallurgy, Vol. 156, 2015

M. Najminoori, A. Mohebbi, B.G. Arabi, S. Daneshpajouh, CFD simulation of an industrial copper electrowinning cell, Hydrometallurgy, Vol. 153, 2015

M. Mokmeli, D. Dreisinger, B. Wassink, Modeling of selenium and tellurium removal from copper electrowinning solution, Hydrometallurgy, Vol. 153, 2015

A. Owais, M. Abdel Hady Gepreel, E. Ahmed, Effect of thermal treatment of copper anodes on electrorefining process, Hydrometallurgy, Vol. 152, 2015

P.H. Britto-Costa, L.A.M. Ruotolo, Optimization of copper electrowinning from synthetic copper sulfate solution using a pulsed bed electrode, Hydrometallurgy, Vol. 150, 2014

M.J. Leahy, M.P. Schwarz, Flow and mass transfer modelling for copper electrowinning: development of instabilities along electrodes, Hydrometallurgy, Vol. 147-148, 2014

S. Kawai, T. Miyazawa, CFD modelling and simulation of industrial-scale copper electrorefining process, Minerals Engineering, Vol. 63, 2014

A. Baral, C.K. Sarangi, B.C. Tripathy, I.N. Bhattacharya, T. Subbaiah, Copper electrodeposition from sulfate solutions¬Effects of selenium, Hydrometallurgy, Vol. 146, 2014

P.H. Britto-Costa, E.R. Pereira-Filho, L.A.M. Ruotolo, Copper electrowinning using a pulsed bed three-dimensional electrode, Hydrometallurgy, Vol. 144-5, 2014

S. Kanapathy, N. Mohamed, Recovery of copper using an electro MP - Cell operated in an electrogenerative mode, Separation and Purification Technology, Vol. 118, 2013

R. Al Shakarji, Y. He, S. Gregory, Performance evaluation of acid mist reduction techniques in copper electrowinning, Hydrometallurgy, Vol. 131-132, 2013

Ying-Lin Peng, Ya-Jie Zheng, Wen-Mi Chen, The oxidation of arsenic from As(III) to As(V) during copper electrorefining, Hydrometallurgy, Vol. 129-130, 2012

M. Jozegholami Barmi, A.N. Nikoloski, Electrodeposition of lead–cobalt composite coatings electrocatalytic for oxygen evolutioon and the properties of composite coated anodes for copper electrowinning, Hydrometallurgy, Vol. 129-130, 2012

A. Ghahremaninezhad, D.G. Dixon, E. Asselin, Kinetics of the ferric–ferrous couple on anodically passivated chalcopyrite (CuFeS₂) electrodes, Hydrometallurgy, Vol. 125-126, 2012

F. Xiao, J. Mao, D. Cao, X. Shen, F. Ren, Formation of antimonate in co-precipitation reaction of As, Sb and Bi in copper electrolytes, Minerals Engineering, Vol. 35, 2012

R. Al Shakarji, Y. He, S. Gregory, Acid mist and bubble size correlation in copper electrowinning, Hydrometallurgy, Vol. 113-114, 2012

M. Aghazadeh, A. Zakeri, M.Sh. Bafghi, Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning, Hydrometallurgy, Vol. 111-112, 2012

F. Safizadeh, A. Lafront, E. Ghali, G. Houlachi, An investigation of the influence of selenium on copper deposition during electrorefining using electrochemical noise analysis, Hydrometallurgy, Vol. 111-112, 2012

I.M. Ahmed, Y.A. El-Nadi, J.A. Daoud, Cementation of copper from spent copper-pickle sulfate solution by zinc ash, Hydrometallurgy, Vol. 110, No. 1-4, 2011

R. Al Shakarji, Y. He, S. Gregory, The sizing of oxygen bubbles in copper electrowinning, Hydrometallurgy, Vol. 108, No. 3-4, 2011

Xue-Wen Wang, Qi-Yuan Chen, Zhou-Lan Yin, Ming-Yu Wang, Fang Tang, The role of arsenic in the homogeneous precipitation of As, Sb and Bi impurities in copper electrolyte, Hydrometallurgy, Vol. 108, No. 3-4, 2011

F. Gros, S. Baup, M. Aurousseau, Copper cementation on zinc and iron mixtures: Part 2: Fluidized bed configuration, Hydrometallurgy, Vol. 106, No. 1-2, 2011

F. Gros, S. Baup, M. Aurousseau, Copper cementation on zinc and iron mixtures: Part 1: Results on rotating disc electrode, Hydrometallurgy, Vol. 106, No. 1-2, 2011

R. Al Shakarji, Y. He, S. Gregory, Statistical analysis of the effect of operating parameters on acid mist generation in copper electrowinning, Hydrometallurgy, Vol. 106, No. 1-2, 2011

X. Wang, Q. Chen, Z. Yin, M. Wang, B. Xiao, F. Zhang, Homogeneous precipitation of As, Sb and Bi impurities in copper electrolyte during electrorefining, Hydrometallurgy, Vol. 105, No. 3-4, 2011

N. Tshimwanga, K. Maweja, K. Tshula, Efficacy of polyacrylamide and protein flocculants in preventing anode depassivation induced Pb-contamination of copper electrowinning cathodes, Hydrometallurgy, Vol. 105, No. 3-4, 2011

G. Viramontes-Gamboa, M.M. Pena-Gomar, D.G. Dixon, Electrochemical hysteresis and bistability in chalcopyrite passivation, Hydrometallurgy, Vol. 105, No. 1-2, 2010

D.A. El-Gayar, A.H. El-Shazly, Y.A. El-Taweel, G.H. Sedahmed, Effect of electrode pulsation on the rate of simultaneous electrochemical recovery of copper and regeneration of ferric salts from dilute solutions, Chemical Engineering Journal, Vol. 162, No. 3, 2010

H.H. Abdel-Rahman, A.M. Ahmed, A.A. Harfoush, A.H.E. Moustafa, The effect of aromatic and aliphatic amines on copper electrowinning from acidic sulphate electrolyte, Hydrometallurgy, Vol. 104, No. 2, 2010

D. Saramak, T. Tumidajski, B. Skorupska, Technological and economic strategies for the optimization of Polish electrolytic copper production plants, Minerals Engineering, Vol. 23, No. 10, 2010

Q. Liu, H. Li, A comparison of the electrochemical behaviors of pyrite and chalcopyrite in a NaCl solution at room temperature and under differential stress, Minerals Engineering, Vol. 23, No. 9, 2010

X. Ren, Q. Wei, S. Hu, S. Wei, Electrochemical oxidation of Ce(III) to Ce(IV) and deposition of copper powder in an electrolytic membrane reactor, Hydrometallurgy, Vol. 103, No. 1-4, 2010

Safizadeh, F., et al, Monitoring the influence of gelatin and thiourea on copper electrodeposition employing electrochemical noise technique, Canadian Metallurgical Quarterly, Vol.49, No.1, 2010

Hait, J., et al, Processing of copper electrorefining anode slimes: a review, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.118, No.4, 2009

F. Safizadeh, A.-M. Lafront, E. Ghali, G. Houlachi, Monitoring the quality of copper deposition by statistical and frequency analyses of electrochemical noise, Hydrometallurgy, Vol. 100, No. 3-4, 2010

I. Giannopoulou, D. Panias, I. Paspaliaris, Electrochemical modeling and study of copper deposition from concentrated ammoniacal sulfate solutions, Hydrometallurgy, Vol. 99, No. 1-2, 2009

Beukes, N.T., and Badenhorst, J., Copper electrowinning: theoretical and practical design, Journal of the Southern African IMM, Vol.109, No.6, 2009

Q.B. Zhang, Y.X. Hua, Y.T. Wang, H.J. Lu, X.Y. Zhang, Effects of ionic liquid additive [BMIM]HSO₄ on copper electro-deposition from acidic sulfate electrolyte, Hydrometallurgy, Vol. 98, No. 3-4, 2009

B. McKevitt, D. Dreisinger, A comparison of various ion exchange resins for the removal of ferric ions from copper electrowinning electrolyte solutions part I: Electrolytes containing no other impurities, Hydrometallurgy, Vol. 98, No. 1-2, 2009

B. McKevitt, D. Dreisinger, A comparison of various ion exchange resins for the removal of ferric ions from copper electrowinning electrolyte solutions Part II: Electrolytes containing antimony and bismuth, Hydrometallurgy, Vol. 98, No. 1-2, 2009

Chen, T.T., and Dutrizac, J.E., Characterisation of the liberator cells sludges from three copper electrorefineries, Canadian Metallurgical Quarterly, Vol.48, No.1, 2009

T. Nguyen, A. Atrens, Composition and morphology of the film formed on a lead alloy under conditions typical of the electro-winning of copper, Hydrometallurgy, Vol. 96, No. 1-2, 2009

B. Panda, S.C. Das, R.K. Panda, Effect of added cobalt ion on electro-deposition of copper from sulfate bath using graphite and Pb-Sb anodes, Hydrometallurgy, Vol. 95, No. 1-2, 2009

P.A. Riveros, J.E. Dutrizac and R. Lastra, A Study of the Ion Exchange Removal of Antimony(lIl) and Antimony(V) from Copper Electrolytes, Canadian Metallurgical Quarterly, Vol.47 No.3, 2008

Munoz, J.A., et al, Interaction of silver ions with sulphide minerals with special emphasis on the chalcopyrite/pyrite galvanic couple, Canadian Metallurgical Quarterly, Vol.47 No.3, 2008

Beauchemin, S., et al, Behaviour of antimony and bismuth in copper electrorefining circuits, CIM Magazine, Vol.3 No.5, 2008

J.M. Casas, P. Acuna-Goycolea, G. Crisostomo, L. Cifuentes, Processing of a ferric anolyte produced by a copper electrowinning cell based on reactive electro dialysis, Minerals Engineering, Vol.21 No.7, 2008

Beauchemin, S., et al, Behaviour of antimony and bismuth in copper electrorefining circuits, Canadian Metallurgical Quarterly, Vol.47 No.1, 2008

J.E. Dutrizac, A. Kuiper, The solubility of calcium sulphate in simulated copper sulphate electrorefining solutions, Hydrometallurgy, Vol. 92, No.1-2, 2008

Nikoloski, A.N., and Nicol, M.J., Effect of cobalt ions on the performance of lead anodes used for the electrowinning of copper- a literature review, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.2, 2008

Sarver, E.A., et al, Reaction kinetics of ferrous regeneration for alternate anode reaction technology, Minerals & Metallurgical Processing, Vol.24 No.2, 2007

M. Ojaghi Ilkhchi, H. Yoozbashizadeh and M. Sadegh Safarzadeh, The effect of additives on anode passivation in electrorefining of copper,Chemical Engineering and Processing, Vol. 46, Issue 8, 2007

M.S. Alam, M. Tanaka, K. Koyama, T. Oishi and J.-C. Lee, Electrolyte purification in energy-saving monovalent copper electrowinning processes, Hydrometallurgy, Vol.87 No.1-2, 2007

C.P. Fabian, M.J. Ridd and M.E. Sheehan, Assessment of activated polyacrylamide and guar as organic additives in copper electrodeposition, Hydrometallurgy, Vol.86 No.1-2, 2007

A. Agrawal, S. Kumari, D. Bagchi, V. Kumar and B.D. Pandey, Recovery of copper powder from copper bleed electrolyte of an Indian copper smelter by electrolysis, Minerals Engineering, Vol.20 No.1, 2007

W. Xue-Wen, C. Qi-Yuan, Y. Zhou-Lan and X. Lian-Sheng, Identification of arsenato antimonates in copper anode slimes, Hydrometallurgy, Vol.84 No.3-4, 2006

A. Agrawal, S. Kumari, D. Bagchi, V. Kumar and B.D. Pandey, Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders, Hydrometallurgy, Vol.84 No.3-4, 2006

C. Fabian, M.J. Ridd and M. Sheehan, Rotating cylinder electrode study of the effect of activated polyacrylamide on surface roughness of electrodeposited copper, Hydrometallurgy, Vol.84 No.3-4, 2006

L. Cifuentes, G. Crisóstomo and M. Mella, Predicting the coverage ratio of copper electrodeposits obtained on mesh cathodes, Minerals Engineering, Vol.19 No.13, 2006

T.Z. Fahidy, A Markovian analysis of the propagation kinetics of anode slimes in electrorefining cells, Hydrometallurgy, Vol.84 No.1-2, 2006

J. Xue, Q. Wu, Z. Wang and S. Yi, Function of additives in electrolytic preparation of copper powder, Hydrometallurgy, Vol.82 No.3-4, 2006

L. Cifuentes, I. García, R. Ortiz and J.M. Casas, The use of electrohydrolysis for the recovery of sulphuric acid from copper-containing solutions, Separation and Purification Technology, Vol.50 No.2, 2006

L. Cifuentes, M. Grageda, G. Crisostomo, Electrowinning of copper in two- and three-compartment reactive electrodialysis cells, Chemical Engineering Science, Vol.61 No.11, 2006

A. Rojo, H.K. Hansen, L.M. Ottosen, Electrodialytic remediation of copper mine tailings: Comparing different operational conditions, Minerals Engineering, Vol.19 No.5, 2006

F.A. Lemos, L.G.S. Sobral, A.J.B. Dutra, Copper electrowinning from gold plant waste streams, Minerals Engineering, Vol.19 No.5, 2006

Cifuentes, L., and Mella, M., On the physical quality of copper electrodeposits obtained on mesh cathodes, Canadian Metallurgical Quarterly, Vol.45 No.1, 2006

Mubarok, Z. Filzwieser, I. Paschen, P., Analysis of Nodulated Cathodes from Atlantic Copper and New Boliden. Erzmetall, Vol.58 No.4, 2005

D.M. Zhou, C.F. Deng, A.N. Alshawabkeh, L. Cang, C.F. Deng, Effects of catholyte conditioning on electrokinetic extraction of copper from mine tailings., Environment International, Vol.31 No.6, 2005

Brown, C.J., Control of copper electrolyte impurities using the Eco-Tec APU. CIM Bulletin, Vol.98 No.1088, 2005

Vidal, G. A. Wiechmann, E. P. Pagliero, A. J., Technological Improvement in Copper Electrometallurgy: Optibar Segmented Intercell Bars (Patent Pending). Canadian Metallurgical Quarterly, Vol.44 No.2, 2005

R.M. San Martin, A.F. Otero, M. Figueroa, V. Escobar, A. Cruz, Use of quillaja saponins (Quillaja saponaria Molina) to control acid mist in copper electrowinning processes - Part 1. Laboratory scale evaluation Hydrometallurgy, Vol.77 No.3-4, 2005

R.M. San Martin, A.F. Otero, A. Cruz, Use of quillaja saponins (Quillaja saponaria Molina) to control acid mist in copper electrowinning processes - Part 2: pilot plant and industrial scale evaluation Hydrometallurgy, Vol.77 No.3-4, 2005

S. Varvara, L. Muresan, I.C. Popescu, G. Maurin, Copper electrodeposition from sulfate electrolytes in the presence of hydroxyethylated 2-butyne-1, 4-diol. Hydrometallurgy, Vol.75 No.1-4, 2004

Chen, T. T. Dutrizac, J. E., Gold in the Electrorefining of Copper and the Decopperizing of Copper Anode Slimes. JOM, Vol.56 No.8, 2004

G.W Reade, P. Bond, C. Ponce de Leon, F.C Walsh, The application of reticulated vitreous carbon rotating cylinder electrodes to the removal of cadmium and copper ions from solution. Journal of Chemical Technology & Biotechnology, Vol.79 No.9, 2004

G.W Reade, A.H Nahle, P. Bond, J.M Friedrich and F.C Walsh, Removal of cupric ions from acidic sulfate solution using reticulated vitreous carbon rotating cylinder electrodes. Journal of Chemical Technology & Biotechnology, Vol.79 No.9, 2004

Hoffmann, J. E., The Purification of Copper Refinery Electrolyte. JOM, Vol.56 No.7, 2004

Wang, S., Impurity Control and Removal in Copper Tankhouse Operations. JOM, Vol.56 No.7, 2004

Shaw, D. R., Dreisinger, D. B. Lancaster, T. Richmond, G. D. Tomlinson, M., The Commercialization of the FENIX Iron Control System for Purifying Copper Electrowinning Electrolytes. JOM, Vol.56 No.7, 2004

Ramachandran, V., Copper, Nickel, and Cobalt Production: Impurity Control and Removal. JOM, Vol.56 No.7, 2004

Cifuentes, L., and Casa, J.M., Advances in the treatment of CuSO₄-H₂SO₄-As-Sb-H₂O solutions by electrodialysis. CIM Bulletin, Vol.97 No.1081, 2004

Biswas R.K., Jana R.K., Crude electrorefining electrolyte obtained from ICC (Ghatsila, India) copper dust. Mineral Processing and Extractive Metallurgy, Vol.113 No.1, 2004

L. Cifuentes, R. Glasner, J.M. Casas, Aspects of the development of a copper electrowinning cell based on reactive electrodialysis. Chemical Engineering Science, Vol.59 No.5, 2004

A. Hrussanova, L. Mirkova, Ts. Dobrev, S. Vasilev, Influence of temperature and current density on oxygen overpotential and corrosion rate of Pb-Co3O4, Pb-Ca-Sn, and Pb-Sb anodes for copper electrowinning: Part I. Hydrometallurgy, Vol.72 No.3-4, 2004

A. Hrussanova, L. Mirkova, Ts. Dobrev, Influence of additives on the corrosion rate and oxygen overpotential of Pb-Co3O4, Pb-Ca-Sn and Pb-Sb anodes for copper electrowinning - Part II. Hydrometallurgy, Vol.72 No.3-4, 2004

Los, P. Plinska, S. Gladysz, O., Automatic electrolyte composition determination in electrorefining of copper. Erzmetall, Vol.57 No.1, 2004

B. Panda, S.C. Das, R.K. Panda, Synergistic effects of added bivalent aqua cobalt ion, bivalent aqua iron ion and aqueous sulfurous acid on a graphite anode during electrodeposition of copper from a sulfate bath. Hydrometallurgy, Vol.72 No.1-2, 2004

M. Kanungo, K.G. Mishra, S.C. Das, Study on morphology of copper deposited onto aluminium by immersion plating from an oxalate bath containing perchloric acid. Minerals Engineering, Vol.16 No.12, 2003

Moats, M. Hardee, K. Brown, C., Mesh-on-Lead Anodes for Copper Electrowinning. JOM, Vol.55 No.7, 2003

J.L. Sigley, P.C. Johnson, S.P. Beaudoin. Use of nonionic surfactant to reduce sulfuric acid mist in the copper electrowinning process. Hydrometallurgy, Vol. 70 No.1-3, 2003

X. Wang, Q. Chen, Z. Yin, P. Zhang, Z. Long, Z. Su. Removal of impurities from copper electrolyte with adsorbent containing antimony. Hydrometallurgy, Vol. 69 No.1-3, 2003

Chen, T. T. Dutrizac, J. E., A Mineralogical Study of the Effect of the Lead Content of Copper Anodes on the Dissolution of Arsenic, Antimony and Bismuth During Copper Electrorefining. Canadian Metallurgical Quarterly, Vol.42 No.4, 2003

Kordosky, G.A., Copper recovery using leach/solventextraction/electrowinning technology: forty years of innovation, 2.2 million tonnes of copper annually. Journal of the South African IMM, Vol.102 No.8, 2002

Wiechmann, E. P. Vidal, G. A. Pagliero, A. J., Copper Electrowinning Using Segmented Intercell Bars for Improved Current Distribution. Canadian Metallurgical Quarterly, Vol.41 No.4 2002

Gelinas, S. Finch, J. A. Rao, S. R., Electrowinning of Nickel and Copper From Ethylenediamine Complexes. Canadian Metallurgical Quarterly, Vol.41 No.3 2002

Wang, S., Recovering Copper Using a Combination of Electrolytic Cells. JOM, Vol.54 No.6, 2002

Lu, J., Dreisinger, D.B., and Cooper, W.C., Copper electrowinning from dilute cyanide solution in a membrane cell using graphite felt. Hydrometallurgy, Vol.64 No.1, 2002

Stantke, P., Using CollaMat to Measure Glue in Copper Electrolyte. JOM, Vol.54 No.4, 2002

Stelter, M. Bombach, H. Nesterov, N., Using Polyethylene Glycols as Alternative Inhibitors in Copper Electrorefining. JOM, Vol.54 No.4, 2002

Veilleux, B. Lafront, A.-M. Ghali, E.. Influence of Gelatin on Deposit Morphology during Copper Electrorefining Using Scaled Industrial Cells. Canadian Metallurgical Quarterly, Vol. 41 No. 1, 2002

Jin, S. Ghali, E. Effects of Gelatine, Thiourea and Chloride Ion on the Copper Cathode Polarisation Behaviour in Acidic Copper Sulphate at 65^oC. Canadian Metallurgical Quarterly, Vol.40 No.4, 2001

Stelter, M. Bombach, H., Copper Electrorefining - State of Art and Perspectives. Erzmetall, Vol.54 No.9, 2001.

Veilleux, B. Lafront, A.-M. Ghali, E., Effect of Thiourea on Nodulation During Copper Electrorefining Using Scaled Industrial Cells. Canadian Metallurgical Quarterly, Vol. 40 No. 3, 2001

J. Luis Nava-M. de Oca, E. Sosa, C. Ponce de Leon, M.T. Oropeza. Effectiveness factors in an electrochemical reactor with rotating cylinder electrode for the acid-cupric/copper cathode interface process. Chemical Engineering Science, Vol.56 No.8, 2001

M. Kanungo, V. Chakravarty, K.G. Mishra, S.C. Das. Influence of perchloric acid on the kinetics of immersion plating of copper onto aluminium. Hydrometallurgy, Vol.61 No.1, 2001

A. Hrussanova, L. Mirkova, T. Dobrev. Anodic behaviour of the Pb-Co₃O₄ composite coating in copper electrowinning. Hydrometallurgy, Vol.60 No.3, 2001

L.G. Bergh, J.B. Yianatos. Current status and limitations of copper SX/EW plants control. JOM, Vol. 53 No. 10, October 2001

B. Panda, S.C. Das. Electrowinning of copper from sulfate electrolyte in presence of sulfurous acid. Hydrometallurgy, Vol.59 No.1, 2000

Subbaiah, T. Singh, P. Hefter, G. Muir, D.  and Das, R.P.,  Electrowinning of copper in the presence of anodic depolarisers - a review. Mineral Processing And Extractive Metallurgy Review, Vol. 21 No. 6 2000

K. Gottliebsen, B. Grinbaum, D. Chen, G.W. Stevens. The use of pulsed perforated plate extraction column for recovery of sulphuric acid from copper tank house electrolyte bleeds. Hydrometallurgy, Vol.58 No.3, 2000

C.Y. Cheng, C.A. Hughes, K.R. Barnard, K. Larcombe. Manganese in copper solvent extraction and electrowinning. Hydrometallurgy, Vol.58 No.2, 2000

Felsher, D., Finch, J.A., and Distin, P.A., Electrowinning from copper complexes. Canadian Metallurgical Quarterly, Vol. 39 No. 3, July 2000

Moats, M.S., and Hiskey, J.B., The role of electrolyte additives on passivation behaviour during copper electrorefining. Canadian Metallurgical Quarterly, Vol. 39 No. 3, 2000

Moats, M.S., Hiskey, J.B., and Collins, D.W., The effect of copper, acid, and temperature on the diffusion coefficient of cupric ions in simulated electrorefining electrolytes. Hydrometallurgy, Vol.56 No.3, 2000

L Burzynska. Influence of electrolysis parameters on the silver content of cathodic copper. Hydrometallurgy, Vol.55 No.1, 2000

L Muresan. The effect of some organic additives upon copper electrowinning from sulphate electrolytes. Hydrometallurgy, Vol.54 No.2-3, 2000

Donmez. A kinetic study of the cementation of copper from sulphate solutions onto a rotating aluminum disc. Hydrometallurgy, Vol.53 no.2, October 1999

P. Fornari and C. Abbruzzese. Copper and nickel selective recovery by electrowinning from electronic and galvanic industrial solutions, Hydrometallurgy, Vol.53 No.1, 1999

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]