|
|
|
 |
 |
|
MEI Online: Publications: Refereed Publications: Commodities: Iron: General |
 |
 |
 |
|
|
Shihong Xu, Massimiliano Zanin, William Skinner, Susana Brito e Abreu, Surface chemistry of oxidised pyrite during grinding: ToF-SIMS and XPS surface analysis, Minerals Engineering, Vol.170, 2021 Mohammad Ebrahimi, Ebrahim Azimi, Mehdi Nasiri Sarvi, Yousef Azimi, Hybrid PSO enhanced ANN model and central composite design for modelling and optimization of Low-Intensity magnetic separation of hematite, Minerals Engineering, Vol.170, 2021 V. Nunna, S. Hapugoda, M.I. Pownceby, G.J. Sparrow, Beneficiation of low-grade, goethite-rich iron ore using microwave-assisted magnetizing roasting, Minerals Engineering, Vol.166, 2021 Wentao Zhou, Yongsheng Sun, Yuexin Han, Peng Gao, Yanjun Li, Recycling iron from oolitic hematite via microwave fluidization roasting and magnetic separation, Minerals Engineering, Vol.164, 2021 Armando F.d.V. Rodrigues, Homero Delboni Jr, Malcolm S. Powell, Luis Marcelo Tavares, Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills, Minerals Engineering, Vol.63, 2021 Shihong Xu, Massimiliano Zanin, William Skinner, Susana Brito e Abreu, Surface chemistry of oxidised pyrite during grinding: EDTA extraction analysis, Minerals Engineering, Vol.160, 2021 Emmanuel Baawuah, Christopher Kelsey, Jonas Addai-Mensah, William Skinner, Assessing the performance of a novel pneumatic magnetic separator for the beneficiation of magnetite ore, Minerals Engineering, Vol. 156, 2020 Keith Quast, William Skinner, Influence of matrix type on WHIMS performance in the magnetic processing of iron ores, Minerals Engineering, Vol. 152, 2020 Chen Zhang, Lixia Li, Zhitao Yuan, Xinyang Xu, Zhenguo Song, Yi Ran Zhang, Mechanical properties of siderite and hematite from DFT calculation, Minerals Engineering, Vol. 146, 2020 Chen Zhang, Lixia Li, Zhitao Yuan, Xinyang Xu, Zhenguo Song, Yiran Zhang, Probing the effect of particle imperfections on the sliming of siderite in carbonate-bearing iron ore, Minerals Engineering, Vol. 143, 2019 Mark I. Pownceby, Sarath Hapugoda, James Manuel, Nathan A.S. Webster, Colin M. MacRae, Characterisation of phosphorus and other impurities in goethite-rich iron ores – Possible P incorporation mechanisms, Minerals Engineering, Vol. 143, 2019 Tulio M. Campos, Gilvandro Bueno, Gabriel K.P. Barrios, Luís Marcelo Tavares, Pressing iron ore concentrate in a pilot-scale HPGR. Part 2: Modeling and simulation, Minerals Engineering, Vol. 140, 2019 Tulio M. Campos, Gilvandro Bueno, Gabriel K.P. Barrios, Luís Marcelo Tavares, Pressing iron ore concentrate in a pilot-scale HPGR. Part 1: Experimental results, Minerals Engineering, Vol. 140, 2019 Suchita Rai, M.T. Nimje, M.J. Chaddha, Sweta Modak, K.R. Rao, Anupam Agnihotri, Recovery of iron from bauxite residue using advanced separation techniques, Minerals Engineering, Vol. 134, 2019 Nilima Dash, Swagat S. Rath, Shivakumar I. Angadi, Thermally assisted magnetic separation and characterization studies of a low-grade hematite ore, Powder Technology, Vol. 346, 2019 Samayamutthirian Palaniandy, Rinto Halomoan, Hidemasa Ishikawa, TowerMill circuit performance in the magnetite grinding circuit – The multi-component approach, Minerals Engineering, Vol. 133, 2019 Viktor Lishchuk, Cecilia Lund, Pierre-Henri Koch, Mattias Gustafsson, Bertil I. Pålsson, Geometallurgical characterisation of Leveäniemi iron ore – Unlocking the patterns, Minerals Engineering, Vol. 131, 2019 Lunga Cleartone Bam, Jodie Ann Miller, Megan Becker, Ian James Basson, X-ray computed tomography: Practical evaluation of beam hardening in iron ore samples, Minerals Engineering, Vol. 131, 2019 Jingfeng He, Chengguo Liu, Pu Hong, Yake Yao, Zhenfu Luo, Lala Zhao, Mineralogical characterization of the typical coarse iron ore particles and the potential to discharge waste gangue using a dry density-based gravity separation, Powder Technology, Vol. 342, 2019 K. Quast, A review on the characterisation and processing of oolitic iron ores, Minerals Engineering, Vol. 126, 2018 M.K. Tøgersen, R.A. Kleiv, S. Ellefmo, K. Aasly, Mineralogy and texture of the Storforshei iron formation, and their effect on grindability, Minerals Engineering, Vol. 125, 2018 V.P. Ponomar, N.O. Dudchenko, A.B. Brik, Synthesis of magnetite powder from the mixture consisting of siderite and hematite iron ores, Minerals Engineering, Vol. 122, 2018 L. Pérez-Barnuevo, S. Lévesque, C. Bazin, Drill core texture as geometallurgical indicator for the Mont-Wright iron ore deposit (Quebec, Canada), Minerals Engineering, Vol. 122, 2018 D. Kumar, V. Jain, B. Rai, Can carboxymethyl cellulose be used as a selective flocculant for beneficiating alumina-rich iron ore slimes? A density functional theory and experimental study, Minerals Engineering, Vol. 121, 2018 E. Donskoi, T.D. Raynlyn, A. Poliakov, Image analysis estimation of iron ore particle segregation in epoxy blocks, Minerals Engineering, Vol. 120, 2018 K. Engström, K.H. Esbensen, Evaluation of sampling systems in iron ore concentrating and pelletizing processes – Quantification of Total Sampling Error (TSE) vs. process variation, Minerals Engineering, Vol. 116, 2018 J. Yu, Y. Han, Y. Li, P. Gao, Beneficiation of an iron ore fines by magnetization roasting and magnetic separation, International Journal of Mineral Processing, Vol. 168, 2017 N. Khajehzadeh, O. Haavisto, L. Koresaar, On-stream mineral identification of tailing slurries of an iron ore concentrator using data fusion of LIBS, reflectance spectroscopy and XRF measurement techniques, Minerals Engineering, Vol. 113, 2017 A. Mwanga, M. Parian, P. Lamberg, J. Rosenkranz, Comminution modeling using mineralogical properties of iron ores, Minerals Engineering, Vol. 111, 2017 S.K. Tripathy, V. Singh, Y.R. Murthy, P K Banerjee, N. Suresh, Influence of process parameters of dry high intensity magnetic separators on separation of hematite, International Journal of Mineral Processing, Vol. 160, 2017 M.C. Munro, A. Mohajerani, Moisture content limits of Iron Ore Fines to prevent liquefaction during transport: Review and experimental study, International Journal of Mineral Processing, Vol. 148, 2016 E. Donskoi, A. Poliakov, R. Holmes, S. Suthers, N. Ware, J. Manuel, J. Clout, Iron ore textural information is the key for prediction of downstream process performance, Minerals Engineering, Vol. 86, 2016 I.D. Delbem, R. Galéry, P.R.G. Brandão, A.E.C. Peres, Semi-automated iron ore characterisation based on optical microscope analysis: Quartz/resin classification, Minerals Engineering, Vol. 82, 2015 M. Melashvili, C. Fleming, I. Dymov, D. Matthews, D. Dreisinger, Equation for thiosulphate yield during pyrite oxidation, Minerals Engineering, Vol. 74, 2015 F.P. van der Meer, Pellet feed grinding by HPGR, Minerals Engineering, Vol. 73, 2015 P. Pourghahramani, B.N. Akhgar, Characterization of structural changes of mechanically activated natural pyrite using XRD line profile analysis, International Journal of Mineral Processing, Vol. 134, 2015 S. Singh, H. Sahoo, S.S. Rath, A.K. Sahu, B. Das, Recovery of iron minerals from Indian iron ore slimes using colloidal magnetic coating, Powder Technology, Vol. 269, 2015 M. Omran, T. Fabritius, R. Mattila, Thermally assisted liberation of high phosphorus oolitic iron ore: A comparison between microwave and conventional furnaces, Powder Technology, Vol. 269, 2015 M. Omran, T. Fabritius, A.M. Elmahdy, N.A. Abdel-Khalek, M. El-Aref, A. El-Hamid Elmanawi, Effect of microwave pre-treatment on the magnetic properties of iron ore and its implications on magnetic separation, Separation and Purification Technology, Vol. 136, 2014 C. Bazin, M. Sadeghi, M. Bourassa, P. Roy, F. Lavoie, D. Cataford, C. Rochefort, C. Gosselin, Size recovery curves of minerals in industrial spirals for processing iron oxide ores, Minerals Engineering, Vol. 65, 2014 S.K. Tripathy, P.K. Banerjee, N. Suresh, Separation analysis of dry high intensity induced roll magnetic separator for concentration of hematite fines, Powder Technology, Vol. 264, 2014 A. Ghosh, A.K. Sharma, B. Nayak, S. Palit Sagar, Infrared thermography: An approach for iron ore gradation, Minerals Engineering, Vol. 62, 2014 D. Amariei, D. Michaud, G. Paquet, M. Lindsay, The use of a Reflux Classifier for iron ores: Assessment of fine particles recovery at pilot scale, Minerals Engineering, Vol. 62, 2014 I. Tonzetic , M. Duncan, S. Bramdeo, The autosem ore characterisation of conglomeratic and banded iron formations, Minerals Engineering, Vol. 61, 2014 K. Jang, V.R.M. Nunna, S. Hapugoda, A.V. Nguyen, W.J. Bruckard, Chemical and mineral transformation of a low grade goethite ore by dehydroxylation, reduction roasting and magnetic separation, Minerals Engineering, Vol. 60, 2014 S. Dwarapudi, P.K. Banerjee, P. Chaudhary, S. Sinha, U. Chakraborty, C. Sekhar, T. Venugopalan, R. Venugopal, Effect of fluxing agents on the swelling behavior of hematite pellets, International Journal of Mineral Processing, Vol. 126, 2014 O. da Fonseca Martins Gomes, J.C. Alvarez Iglesias, S. Paciornik, M. Beatriz Vieira, Classification of hematite types in iron ores through circularly polarized light microscopy and image analysis, Minerals Engineering, Vol. 52, 2013 K.H. Hestnes, K. Aasly, R. Sandøy, B.E. Sørensen, Occurrence of iron in industrial granitic pegmatite, Minerals Engineering, Vol. 52, 2013 A. Ghosh, B. Nayak, T.K. Das, S. Palit Sagar, A non-invasive technique for sorting of alumina-rich iron ores, Minerals Engineering, Vol. 45, 2013 N. Naudé, L. Lorenzen, A.V. Kolesnikov, C. Aldrich, L. Auret, Observations on the separation of iron ore in a prototype batch jig, International Journal of Mineral Processing, Vol. 120, 2013 E. Donskoi, A.F. Collings, A. Poliakov, W.J. Bruckard, Utilisation of ultrasonic treatment for upgrading of hematitic/goethitic iron ore fines, International Journal of Mineral Processing, Vol. 114-117, 2012 H.J. Bianquini Couto, P.F. Almeida Braga, S.C. Alves França, Use of gas pycnometry for estimating the iron content in mineral samples, Minerals Engineering, Vol. 39, 2012 N. Peng, B. Peng, L. Chai, M. Li, J. Wang, H. Yan, Y. Yuan, Recovery of iron from zinc calcines by reduction roasting and magnetic separation, Minerals Engineering, Vol. 35, 2012 E. Govender, S.T.L. Harrison, C.G. Bryan, Modification of the ferric chloride assay for the spectrophotometric determination of ferric and total iron in acidic solutions containing high concentrations of copper, Minerals Engineering, Vol. 35, 2012 X. Xiao, G. Zhang, Q. Feng, S. Xiao, L. Huang, X. Zhao, Z. Li, The liberation effect of magnetite fine ground by vertical stirred mill and ball mill, Minerals Engineering, Vol. 34, 2012 B. Bergquist, Traceability in iron ore processing and transports, Minerals Engineering, Vol. 30, 2012 H.J. Haselhuhn, J.J. Carlson, S.K. Kawatra, Water chemistry analysis of an industrial selective flocculation dispersion hematite ore concentrator plant, International Journal of Mineral Processing, Vol. 102-103, 2012 F. Nellros, M.J. Thurley, Automated image analysis of iron-ore pellet structure using optical microscopy, Minerals Engineering, Vol. 24, No. 14, 2011 I.U. Bhuiyan, J. Mouzon, S.P.E. Forsmo, J. Hedlund, Quantitative image analysis of bubble cavities in iron ore green pellets, Powder Technology, Vol. 214, No. 3, 2011 J.C. Alvarez Iglesias, O. da Fonseca Martins Gomes, S. Paciornik, Automatic recognition of hematite grains under polarized reflected light microscopy through image analysis, Minerals Engineering, Vol. 24, No. 12, 2011 H.A. Garcia-Martinez, S. Song, A. Lopez-Valdivieso, In situ observation of quartz particles entrained into magnetite coagulates in a uniform magnetic field, Minerals Engineering, Vol. 24, No. 8, 2011 M. Manna, S. Sasmal, P.K. Banerjee, D.K. Sengupta, Effect of mineral geology, mineral size and settling time on selective dispersion and separation process for recovering iron value from iron ultra fines, Powder Technology, Vol. 211, No. 1, 2011 K. Simeonidis, Th. Gkinis, S. Tresintsi, C. Martinez-Boubeta, G. Vourlias, I. Tsiaoussis, G. Stavropoulos, M. Mitrakas, M. Angelakeris, Magnetic separation of hematite-coated Fe3O4 particles used as arsenic adsorbents, Chemical Engineering Journal, Vol. 168, No. 3, 2011 R. Sakthivel, K. Jayasankar, S.K. Das, B. Das, B.K. Mishra, Effect of planetary ball milling on phase transformation of a silica-rich iron ore, Powder Technology, Vol. 208, No. 3, 2011 J.J. Carlson, S.K. Kawatra, Effects of CO2 on the zeta potential of hematite, International Journal of Mineral Processing, Vol. 98, No. 1-2, 2011 K. Barani, S.M. Javad Koleini, B. Rezaei, Magnetic properties of an iron ore sample after microwave heating, Separation and Purification Technology, Vol. 76, No. 3, 2011 J. Oshitani, T. Kawahito, M. Yoshida, K. Gotoh, G.V. Franks, The influence of the density of a gas-solid fluidized bed on the dry dense medium separation of lump iron ore, Minerals Engineering, Vol. 24, No. 1, 2011 A. Pal, A.N. Samanta, S. Ray, Treatment of iron ore slime for value addition, Hydrometallurgy, Vol. 105, No. 1-2, 2010 Z. Wang, X. Xie, S. Xiao, J. Liu, Comparative study of interaction between pyrite and cysteine by thermogravimetric and electrochemical techniques, Hydrometallurgy, Vol. 101, No. 1-2, 2010 Srivastava, U., and Kawatra, S.K., Strategies for processing low-grade iron ore minerals. Mineral Processing and Extractive Metallurgy Review, Vol. 30, No. 4, 2009 G. Magela da Costa, V. Barron, C. Mendonca Ferreira, J. Torrent, The use of diffuse reflectance spectroscopy for the characterization of iron ores, Minerals Engineering, Vol. 22, No. 14, 2009 Takehara, L., et al, Phase quantification in iron ore, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.118, No.3, 2009 Das, A., et al, Performance prediction of floatex density separator in processing iron ore fines- a relative velocity approach, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.118, No.2, 2009 Upadhyay, R.K., et al, Relevance of geological aspects and ore mineralogy in selecting beneficiation methods for processing of eastern Indian iron ores, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.118, No.1, 2009 Busch, U., Fine tuning at the Cape- jigs for South Africa, AT Aufbereitungs Technik, No.3, 2008 B. Kvarnstrom, P. Oghazi, Methods for traceability in continuous processes-Experience from an iron ore refinement process, Minerals Engineering, Vol. 21, No. 10, 2008 K.E. Waters, N.A. Rowson, R.W. Greenwood, A.J. Williams, The effect of heat treatment on the magnetic properties of pyrite, Minerals Engineering, Vol. 21, No. 9, 2008 Roy, S., and Das, A., Characterization and processing of low-grade iron ore slime from the Jilling area of India, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.3, 2008 P. Pourghahramani, E. Altin, M. Rao Mallembakam, W. Peukert, E. Forssberg, Microstructural characterization of hematite during wet and dry millings using Rietveld and XRD line profile analyses, Powder Technology, Vol. 186, No. 1, 2008 D. Alkac, U. Atalay, Kinetics of thermal decomposition of Hekimhan-Deveci siderite ore samples, International Journal of Mineral Processing, Vol.87 No.3-4, 2008 E. Donskoi, S.P. Suthers, J.J. Campbell, T. Raynlyn, Modelling and optimization of hydrocyclone for iron ore fines beneficiation -- using optical image analysis and iron ore texture classification, International Journal of Mineral Processing, Vol.87 No.3-4, 2008 P. Pourghahramani, B. Palson, E. Forssberg, Multivariate projection and analysis of microstructural characteristics of mechanically activated hematite in different grinding mills, International Journal of Mineral Processing, Vol.87 No.3-4, 2008 El-midany, A.A., and Ahmed, H.A.M., Assessment of a selectivity criterion for upgrading ultrafine iron ores by slecetive flocculation, Minerals and Metallurgical Processing, Vol.25, No.2, 2008 Kodukula, U.B., et al, Studies on water-injection cyclone for processing of iron ore fines, Minerals and Metallurgical Processing, Vol.25, No.2, 2008 L. Chen, N. Ren, D. Xiong, Experimental study on performance of a continuous centrifugal concentrator in reconcentrating fine hematite, International Journal of Mineral Processing, Vol.87 No.1-2, 2008 E. Mostad, S. Rolseth and J. Thonstad, Electrowinning of iron from sulphate solutions, Hydrometallurgy, Vol. 90, No.2-4, 2008 Wang, H., A review on process-related characteristics of pyrrhotite. Mineral Processing and Extractive Metallurgy Review, Vol.29, No.1, 2008 P. Pourghahramani and E. Forssberg, Changes in the structure of hematite by extended dry grinding in relation to imposed stress energy, Powder Technology, Vol.178 No.1, 2007 P. Pourghahramani and E. Forssberg, The characterization of structural changes in hematite ground in a confined particle bed using Rietveld analysis, International Journal of Mineral Processing, Vol.83 No.1-2, 2007 K.E. Waters, N.A. Rowson, R.W. Greenwood and A.J. Williams, Characterising the effect of microwave radiation on the magnetic properties of pyrite, Separation and Purification Technology, Vol.56 No.1, 2007 E. Donskoi, S.P. Suthers, S.B. Fradd, J.M. Young, J.J. Campbell, T.D. Raynlyn and J.M.F. Clout, Utilization of optical image analysis and automatic texture classification for iron ore particle characterisation, Minerals Engineering, Vol.20 No.5, 2007 Y.-Q. Ji, L. Black, R. Koster and M. Janek, Hydrophobic coagulation and aggregation of hematite particles with sodium dodecylsulfate, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.298 No.3, 2007 H.B. Duisburg and S. Mishra, Challenges and solutions in the beneficiation of Indian iron ore for the optimization of iron ore and steel production, Aufbereitungs Technik, Vol.47 No.11, 2006 Al-Wakeel, M.I., et al, Beneficiation of low grade Ghorabi iron ore, Bahariya Oasis, Egypt: a case study, Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.4, 2006 C. Paipa, E. Poblete and M. Inés Toral, Simultaneous determination of iron and copper in pregnant liquid solutions, Minerals Engineering, Vol.19 No.14, 2006 J.Q. Xu, R.P. Zou and A.B. Yu, Quantification of the mechanisms governing the packing of iron ore fines, Powder Technology, Vol.169 No.2, 2006 A.K. Mukherjee, D. Bhattacharjee and B.K. Mishra, Role of water velocity for efficient jigging of iron ore, Minerals Engineering, Vol.19 No.9, 2006 P. Pourghahramani and E. Forssberg, Comparative study of microstructural characteristics and stored energy of mechanically activated hematite in different grinding environments, International Journal of Mineral Processing, Vol.79 No.2, 2006 P. Pourghahramani and E. Forssberg, Microstructure characterization of mechanically activated hematite using XRD line broadening, International Journal of Mineral Processing, Vol.79 No.2, 2006 Y.W. Chen, Y. Li, M.F. Cai, N. Belzile, Z. Dang, Preventing oxidation of iron sulfide minerals by polyethylene polyamines, Minerals Engineering, Vol.19 No.1, 2006 Yang, X., and Aldrich, C., Rheology of aqueous magnetite suspensions in uniform magnetic fields, International Journal of Mineral Processing, Vol.77 No.2, 2005 Eisele, T.C. et al, Water chemistry effects in iron ore concentrate agglomeration feed, Mineral Processing and Extractive Metallurgy Review, Vol.26 No.3-4, 2005 Santos, L.D. et al, Mineralogical and morphological characterization of iron ore types from Minas Gerais, Brazil- influences on the specific surface area of concentrates, Minerals & Metallurgical Processing, Vol.22 No.2, 2005 I. Znamenackova, M. Lovas, A. Mockovciakova, S. Jakabsky, J. Briancin, Modification of magnetic properties of siderite ore by microwave energy., Separation and Purification Technology, Vol.43 No.2, 2005 J. Hulston, R.G. de Kretser, P.J. Scales, Effect of temperature on the dewaterability of hematite suspensions. International Journal of Mineral Processing, Vol.73 No.2-4, 2004 A.I. Arol, A. Aydogan, Recovery enhancement of magnetite fines in magnetic separation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.232 No.2-3, 2004 K. Wang, B. Xing, Mutual effects of cadmium and phosphate on their adsorption and desorption by goethite. Environmental Pollution, Vol.127 No.1, 2004 Elmquist, S. A. Kipfstuhl, L. C. Dowling, E. C, Cliffs and Associates' Circored iron plant. Mining Engineering, Vol.55 No.11, 2003 Kamperman, M., Howard, T., and Everett, J.E., Controlling product quality at high production rates as applied to BHP Billiton Iron Ore Yandi fines operation. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, 2003 Miller, D.J., Integration of beneficiation process into iron ore resource utilisation. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, 2003 Tuckey, K.R.G., Intelligent selection of engineered wear linings in iron ore plant. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, 2003 L.D. Santos, P.R.G. Brandao, Morphological varieties of goethite in iron ores from Minas Gerais, Brazil. Mineral Engineering, Vol.16 No.11 (Supplement), 2003 H. Kahn, M.M.L. Tassinari, G. Ratti, Characterization of bauxite fines aiming to minimize their iron content. Mineral Engineering, Vol.16 No.11 (Supplement), 2003 Araujo, A.C., et al, Ore mineralogy and its relevance for selection of concentration methods in processing of Brazilian iron ores. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, 2003 M. Kosmulski, C. Saneluta, E. Maczka. Electrokinetic study of specific adsorption of cations on synthetic goethite. Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.222 No.1-3, 2003 Grammatikopoulos, T., McKen, A., Hamilton, C., and Christiansen, O., Vanadium-bearing magnetite and ilmenite mineralization and beneficiation from the Sinarsuk V-Ti project, West Greenland. CIM Bulletin, Vol.95 No.1060, 2002 A.M.T. Pereira, P.R.G. Brandao. Statistical validation of standardless and standard-based analysis by X-ray fluorescence spectrometry in iron ores characterisation. Minerals Engineering, Vol.14, No.11, 2001 D.M. Weedon, F. Wilson. Modelling iron ore degradation using a twin pendulum breakage device. Int. J. Mineral Processing, Vol.59, No.3, 2000 M.P. Srivastava, S.K. Pan, N. Prasad, B.K. Mishra. Characterization and processing of iron ore fines of Kiriburu deposit of India. Int. J. Mineral Processing, Vol.61, No.2, 2000 C. Obasi and L.A. Obasi. Granulometry of magnetite and the changing mineral formation conditions at the Itakpe iron ore deposit, Nigeria. Minerals & Metallurgical Processing, Vol. 17 No. 1, 2000 He, Y.B., and Laskowski, J.S., Rheological properties of magnetite suspensions. Mineral Processing and Extractive Metallurgy Review, Vol.20 No.1-3, 2000 C. Obasi and L.A. Obasi. Granulometry of magnetite and the changing mineral formation conditions at the Itakpe iron ore deposit, Nigeria. Minerals & Metallurgical Processing, Vol. 17 No. 1, 2000 D Kovacevic, N Kallay. The adsorption of lead species on goethite. Colloid and Surfaces, A: Physiochem. and Eng. Asp., Vol.166 No 1-3, 2000 K Tano, A Broussaud. Comparison of control strategies for a hematite processing plant. Powder Technology, Vol.105 No.1-3, 1999
|
|
 |
© 1998-2021, Minerals Engineering International Email: amanda@min-eng.com |
 |
