![]() |
![]() |
![]() |
MEI Online: Publications: Refereed Publications: Commodities: Nickel: General |
![]() |
![]() |
![]() |
![]() ![]() |
![]()
M.W. Goldbaum, R. Elliott, J. Forster, Y. Maham, E.R. Bobicki, Investigating the microwave heating behaviour of pyrrhotite tailings, Minerals Engineering, Vol. 146, 2020 Saeed Farrokhpay, Lev Filippov, Daniel Fornasiero, Pre-concentration of nickel in laterite ores using physical separation methods, Minerals Engineering, Vol. 141, 2019 Jiwei Lu, Zhitao Yuan, Mingming Li, Xuan Zhao, Zhongyun Tong, Lixia Li, Shengliang Qi, The role of sodium oleate (NaOL) in the magnetic separation of pentlandite from serpentine using magnetic coating, Powder Technology, Vol. 345, 2019 B. Ma, W. Yang, P. Xing, C. Wang, Y. Chen, D. Lv, Pilot-scale plant study on solid-state metalized reduction–magnetic separation for magnesium-rich nickel oxide ores, International Journal of Mineral Processing, Vol. 169, 2017 S. Farrokhpay, L. Filippov, Aggregation of nickel laterite ore particles using polyacrylamide homo and copolymers with different charge densities, Powder Technology, Vol. 318, 2017 J.Z. Khoo, N. Haque, S. Bhattacharya, Process simulation and energy analysis of two nickel laterite processing technologies, International Journal of Mineral Processing, Vol. 161, 2017 S. Zhou, Y. Wei, B. Li, H. Wang, B. Ma, C. Wang, X. Luo, Mineralogical characterization and design of a treatment process for Yunnan nickel laterite ore, China, International Journal of Mineral Processing, Vol. 159, 2017 B. Musuku, I. Muzinda, B. Lumsden, Cu–Ni processing improvements at First Quantum’s Kevitsa mine, Minerals Engineering, Vol. 88, 2016 J. Gao, M. Zhang, M. Guo, Innovative methodology for comprehensive utilization of saprolite laterite ore: Recovery of metal-doped nickel ferrite and magnesium hydroxide, Hydrometallurgy, Vol. 158, 2015 K. Quast, J.N. Connor, W. Skinner, D.J. Robinson, J. Addai-Mensah, Preconcentration strategies in the processing of nickel laterite ores Part 1: Literature review, Minerals Engineering, Vol. 79, 2015 K. Quast, J.N. Connor, W. Skinner, D.J. Robinson, J. Li, J. Addai-Mensah, Preconcentration strategies in the processing of nickel laterite ores part 2: Laboratory experiments, Minerals Engineering, Vol. 79, 2015 K. Quast, A. Otsuki, D. Fornasiero, D.J. Robinson, J. Addai-Mensah, Preconcentration strategies in the processing of nickel laterite ores part 3: Flotation testing, Minerals Engineering, Vol. 79, 2015 K. Quast, J.N. Connor, W. Skinner, D.J. Robinson, J. Addai-Mensah, Preconcentration strategies in the processing of nickel laterite ores Part 4: Preliminary dewatering studies, Minerals Engineering, Vol. 79, 2015 J. Lu, Z. Yuan, J. Liu, L. Li, S. Zhu, Effects of magnetite on magnetic coating behavior in pentlandite and serpentine system, Minerals Engineering, Vol. 72, 2015 A.M. Kusuma, Q. Liu, H. Zeng, Understanding interaction mechanisms between pentlandite and gangue minerals by zeta potential and surface force measurements, Minerals Engineering, Vol. 69, 2014 E.R. Bobicki, Q. Liu, Z. Xu, Effect of microwave pre-treatment on ultramafic nickel ore slurry rheology, Minerals Engineering, Vol. 61, 2014 E.R. Bobicki, Q. Liu, Z. Xu, Microwave heating of ultramafic nickel ores and mineralogical effects, Minerals Engineering, Vol. 58, 2014 B. Ma, C. Wang, W. Yang, Y. Chen, B. Yang, Comprehensive utilization of Philippine laterite ore, part 1: Design of technical route and classification of the initial ore based on mineralogical analysis, International Journal of Mineral Processing, Vol. 124, 2013 A.M. Kalinkin, S. Kumar, B.I. Gurevich, T.C. Alex, E.V. Kalinkina, V.V. Tyukavkina, V.T. Kalinnikov, R. Kumar, Geopolymerization behavior of Cu–Ni slag mechanically activated in air and in CO2 atmosphere, International Journal of Mineral Processing, Vol. 112-113, 2012 A. Nosrati, J. Addai-Mensah, D.J. Robinson, Drum agglomeration behavior of nickel laterite ore: Effect of process variables, Hydrometallurgy, Vol. 125-126, 2012 M.A. Al-Ghouti, Y.S. Al-Degs, A. Ghrair, H. Khoury, M. Ziedan, Extraction and separation of vanadium and nickel from fly ash produced in heavy fuel power plants, Chemical Engineering Journal, Vol. 173, No. 1, 2011 N.O. Lotter, L.J. Kormos, J. Oliveira, D. Fragomeni, E. Whiteman, Modern Process Mineralogy: Two case studies, Minerals Engineering, Vol. 24, No. 7, 2010 G.K. Das, N. Kelly, D.M. Muir, Rheological behaviour of lateritic smectite ore slurries, Minerals Engineering, Vol. 24, No. 7, 2010 A. Navarra, J.T. Graham, S. Somot, D.H. Ryan, J.A. Finch, Mössbauer quantification of pyrrhotite in relation to self-heating, Minerals Engineering, Vol. 23, No. 8, 2010 A. Basile, J. Hughes, A.J. McFarlane, S.K. Bhargava, Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy, Minerals Engineering, Vol. 23, No. 5, 2010 Wolmarans, E., and Morgan, P., Milling circuit selection for the Nkomati 375 ktpm concentrator, Journal of the Southern African IMM, Vol. 109, No. 11, 2009 Morgan, P., Impact of plant upgrade and DMS on the processing capability of the Tati Nickel concentrator- a case study, Journal of the Southern African IMM, Vol. 109, No. 11, 2009 J.C.O. Andersen, G.K. Rollinson, B. Snook, R. Herrington, R.J. Fairhurst, Use of QEMSCAN® for the characterization of Ni-rich and Ni-poor goethite in laterite ores, Minerals Engineering, Vol. 22, No. 13, 2009 Bartsch, E., et al, Evolution of SAG mill process control at the Xstrata Nickel Raglan operation, CIM Magazine, Vol.3 No.7, 2008 D. Dihang, P. Aimar, J. Kayem, S.N. Koungou, Coagulation and flocculation of laterite suspensions with low levels of aluminium chloride and polyacrylamids, Chemical Engineering and Processing: Process Intensification, Vol.47 No.9-10, 2008 A.L. Coello Velazquez, J.M. Menendez-Aguado and R. Laborde Brown, Grindability of lateritic nickel ores in Cuba, Powder Technology, Vol. 182, No. 1, 2008 Yuce, A.E., et al, Process flowsheet development for beneficiation of nickel ore. Mineral Processing and Extractive Metallurgy Review, Vol.29, No.1, 2008 O'Connell, D.W., et al, A modified cellulose adsorbent for the removal of nickel(II) from aqueous solutions, Journal of Chemical Technology & Biotechnology, Vol.81 No.11, 2006 J.M.M. Aguado, A.L.C. Velázquez, O.N. Tijonov and M.A.R. Díaz, Implementation of energy sustainability concepts during the comminution process of the Punta Gorda nickel ore plant (Cuba), Powder Technology, Vol.170 No.3, 2006 P. Jebbinnk et al, Expanding the Cobalt Recovery Circuit at the Thompson Nickel Refinery, JOM, Vol.58 No.10, 2006 Collins, M.J., et al, Process development by Dynatec for the Ambatovy Nickel Project CIM Bulletin, Vol.98 No.1089, 2005 Kapusta, J. P. T., Recent Advances in the Extraction and Processing of Cu, Ni, and Co. JOM, Vol.57 No.7, 2005 King, M. G., Nickel Laterite Technology-Finally a New Dawn? JOM, Vol.57 No.7, 2005 Pickles, C. A., Microwave Drying of Nickeliferous Limonitic Laterite Ores, Canadian Metallurgical Quarterly, Vol.44 No.3, 2005 G.N. Anastassakis, Physicochemical factors affecting flocculation of pre-reduced nickeliferous laterite suspension, Separation and Purification Technology, Vol.45 No.1, 2005 S. Agatzini-Leonardou, I.G. Zafiratos, D. Spathis, Beneficiation of a Greek serpentinic nickeliferous ore - Part I. Mineral processing. Hydrometallurgy, Vol.74 No.3-4, 2004 N Tzanetakis, K Scott, Recycling of nickel-metal hydride batteries. I: Dissolution and solvent extraction of metals. Journal of Chemical Technology & Biotechnology, Vol.79 No.9, 2004 N Tzanetakis, K Scott, Recycling of nickel-metal hydride batteries. II: Electrochemical deposition of cobalt and nickel. Journal of Chemical Technology & Biotechnology, Vol.79 No.9, 2004 A. Papadopoulos, D. Fatta, K. Parperis, A. Mentzis, K.-J. Haralambous, M. Loizidou, Nickel uptake from a wastewater stream produced in a metal finishing industry by combination of ion-exchange and precipitation methods., Separation and Purification Technology, Vol.39 No.3, 2004 Dutrizac, J. E. Chen, T. T., Factors Affecting the Incorporation of Cobalt and Nickel in Jarosite-Type Compounds. Canadian Metallurgical Quarterly, Vol.43 No.3, 2004 D.B. Warren, F. Grieser, J.M. Perera, G.W. Stevens, Kinetics and the effect of electrostatic surface potential on nickel(II) extraction by 2-hydroxy-5-nonylacetophenone oxime (LIX 84) in a micellar phase., Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.243 No.1-3, 2004 G. Monteleone, L. Morroni, B. Robinson, M.R. Tine, M. Venturini, F. Secco, Metal ion extraction in surfactant solution: Ni2+(aq) and Cd2+(aq) with the ligands PADA and PAR in SDS micellar systems., Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.243 No.1-3, 2004 C.A. Pickles, Microwave heating behaviour of nickeliferous limonitic laterite ores. Minerals Engineering, Vol.17 No.6, 2004 Kerr, A., et al, The "Mill Redesign Project" at Inco's Clarabelle Mill. CIM Bulletin, Vol.96 No.1075, 2003 Michaud, M.J., and Lavigne, M.J., Distinguishing ore types at the Lac des Iles PGE-gold-copper-nickel mine, Ontario. Implications for resource modelling, mining and processing. CIM Bulletin, Vol.96 No.1068, 2003 Bergman, R.A., Nickel production from low-iron laterite ores: process descriptions. CIM Bulletin, Vol. 96 No. 1072, 2003 Ma, J. Pickles, C. A., Microwave Segregation Process for Nickeliferous Silicate Laterites. Canadian Metallurgical Quarterly, Vol.43 No.3, 2003 W. Mulak, P. Balaz, M. Chojnacka. Chemical and morphological changes of millerite by mechanical activation. Int. J. Mineral Processing, Vol.66, No.1-4, 2002 B. Klein, D.J. Hallbom. Modifying the rheology of nickel laterite suspensions. Minerals Engineering, Vol.15, No.10, 2002 Moskalyk, R.R., and Alfantazi, A.M., Nickel laterite processing and electrowinning practice. Minerals Engineering, Vol.15, No.8, 2002 Das, R. P., Production of Nickel and Cobalt from Secondary Sources - the Indian Experience. Erzmetall, Vol. 54 No.9, 2001.
|
![]() ![]()
![]() ![]() |
![]() |
© 1998-2021, Minerals Engineering International Email: amanda@min-eng.com |
![]() |