Home |  News |  Conferences |  Commodities |  Publications |  Business Directory |  Resources |  Help
Go to the MEI Online homepage Sponsored by: Outotec CPD Certified
Search Site:

MEI Online: MEI Conferences: SRCR '11: Technical Papers

Home General Introduction Conference Report Conference Programme Published Papers Delegate List Photos  

 

Selected papers from the conference have been published in Volume 29 (March 2012), a special issue of Minerals Engineering. The papers can be viewed and downloaded at ScienceDirect.

 

Abstracts can be viewed at www.min-eng.com/srcr11/prog

 

The conference proceedings CD-ROM is available by emailing Jon Wills. The CD costs £59 which includes postage and contains the following papers:

 

Towards more sustainable metal use through recycling and other technologies
T. Norgate (CSIRO Minerals Down Under Flagship, Australia)

Developing a practical mechanism for incorporating sustainability principles into mineral processing plant design and operation
G.D. Corder (SMI, University of Queensland, Australia) and S. Green (Centre for Sustainable ResourceProcessing, Australia)

The impacts of recycling of metallic fraction from municipal solid waste: case of Helsinki metropolitan area, Finland
T. Kuusiola (City of Vantaa Enviromental Affairs, Finland), M. Wierink and K. Heiskanen (Aalto University, Finland)

Peak Minerals: assessing impacts across the life of a resource
D. Giurco, L. Mason, T. Prior, R. Memary (University of Technology Sydney, Australia) and G. Mudd (Monash University, Australia)

Mineral resources landscape: assessing sustainability for the case of deep sea mining
C. Cooper and D. Giurco (University of Technology Sydney, Australia)

Drivers and barriers for effective industrial material use
N. Pajunen, M. Wierink and K. Heiskanen (Aalto University, Finland)

Developing a classification system for regional resource synergies
A. Golev and G. Corder (University of Queensland, Australia)

Mitigating acid rock drainage risks while recovering low-sulphur coal from ultrafine colliery wastes using froth flotation
C.K. Mbamba, S.T.L. Harrison, J.-P. Franzidis and J. Broadhurst (University of Cape Town, South Africa)

The role of mineral processing technology in waste treatment and recycling
M.K. Abd El-Rahman (CMRDI, Egypt)

Field experimental cells to investigate the hydro-geotechnical and geochemical behaviour of surface paste disposal: design, implementation, and preliminary results
E. Yilmaz, M. Benzaazoua (NSERC, Canada), B. Bussière (Canada Research Chair in Integrated Mine Waste Management, Canada) and S. Pouliot (Agnico-Eagle Mines Ltd, Canada)

Microwave assisted pyrolysis of residual fractions of waste electrical and electronics equipment
M. Andersson, M.K. Wedel (Chalmers University of Technology, Sweden), C. Forsgren and J. Christéen (Stena Metall AB, Sweden)

A practical and rigorous methodology for integrating sustainable development principles into decision-making processes at minerals processing operations
D. Tuazon, G.D. Corder, M.S. Powell and M. Ziemski (Sustainable Minerals Institute, Australia)

Recovery of gold and iodine from the effluents of semiconductor industry using activated carbon
N.V. Nguyen (University of Science & Technology, Republic of Korea), J. Jeong, J.-c.Lee, D. Shin (KIGAM, Republic of Korea) and B.D. Pandey (National Metallurgical Laboratory, India)

Characterization of mechanical biological treatment reject aimed at packaging glass recovery for recycling
N. Dias, M.T. Carvalho and P. Pina (Instituto Superior Técnico, Portugal)

Recycling of cadmium from hazardous waste by leaching with sulphuric acid and leaching kinetics
M. Gharabaghi, M. Irannajad and A.R. Azadmehr (Amirkabir University of Technology, Iran)

Preparation and evaluation of a composite material based on recycled polyethilene tereftalate and organoclay
G. Neira Arenas and J.F. Palacios (Universidad Industrial de Santander, Colombia)

Resource recovery from MSW incinerator bottom ashes
Yongxiang Yang and Yanping Xiao (Delft University of Technology, The Netherlands)

Recycling foundry by-product in road construction: geotechnical and environmental properties
N. Vulcano-Greullet (DREAL Bourgogne-SDD-ADEE, France), O.Yazoghli-Marzouk (CETE de Lyon-DLA-GIT, France), L. Cantegrit (CETE de Lyon-DETC-DSPES, France), L. Friteyre (CETE de Lyon-DLCF- HCF, France), J. Crosnier (DREAL Rhône- Alpes/REMIPP/MAH, France), S. Nouvion-Dupray (CETMEF/DIR, France) and A. Jullien (LCPC, France)

Detection of system polymer tracer by UV fluorescence spectrometry to improve the recyclability of end of life product
E. Maris and D. Froelich (Institut Arts et Metiers ParisTech Chambéry, France)

An effective alternative to produce high quality aggregates from mixed construction and demolition wastes
S.C. Angulo (Institute of Technological Research of Sao Paulo, Brazil), C. Ulsen, V.M. John and H. Kahn (University of Sao Paulo, Brazil)

Separability studies on fine recycled aggregates from construction and demolition waste
C. Ulsen, H. Kahn, G. Hawlitschek, V.M. John (University of Sao Paulo, Brazil) and S.C. Angulo (Institute of Technological Research of Sao Paulo, Brazil)

Chemical, physical and microbial properties of bauxite processing residue sand as influenced by organic waste and residue mud additions
B.E.H. Jones, R.J. Haynes (University of Queensland, Australia) and I.R. Phillips (Alcoa Ltd, Australia)

A study of pyritic sulfur abstraction from coal in H2SO4 solutions containing H2O2 and complexing agents
E.T. Pecina et al (Universidad Autónoma de Coahuila, Mexico) and E. Orrantia (Centro de Investigación en Materiales Avanzados, Mexico)

Biosorptive removal of cadmium from aqueous solutions using a streptomyces lunalinharesii strain
D.M. Veneu, M.L. Torem and G.A.H. Pino (Catholic University of Rio de Janeiro, Brazil)

Regeneration of magnesium sulfate by decomposition
M. Scheidema, P. Taskinen (Aalto University, Finland) and M.-L. Metsärinta (Outotec Research Centre, Finland)

Magnetite production from acid mine drainage
R.A. Silva, C.D. Castro, C.O. Petter and I.A.H. Schneider (Universidade Federal do Rio Grande do Sul, Brazil)

Thermodynamic model for acidic ferrous sulphate from solubility data
P.M. Kobylin, H. Sippola and P.A. Taskinen (Aalto University, Finland)

Textural characteristics of coconut shell activated carbons and their effects on gold adsorption from gold chloride solution
W.K. Buah (University of Mines and Technology, Ghana), P.T. Williams and J. Onwudili (University of Leeds, UK)

Commercialising geopolymers: revolution or reinventing the wheel?
P. Duxson, J.L. Provis and J.S.J. van Deventer (The University of Melbourne and Zeobond, Australia)

Revaluing mine waste rock and its influence on cutoff grade and strip ratio
M. Hitch (University of British Columbia, Canada)

The use of mining waste rock as a substrate matrix for carbon capture and storage by mineral carbonation; considerations for mine planning
M. Hitch (University of British Columbia, Canada)

Alternative by-product based binders in cemented mine backfill: recipes optimization using the Taguchi Method
O. Peyronnard and M. Benzaazoua (Université du Québec en Abitibi-Témiscamingue, Canada)

Extraction of lithium from micaceous waste from china clay production
E. Siame and R.D. Pascoe (Camborne School of Mines, UK)

Integrated mine tailings management: possibilities for coal tailing deposits in Santa Catarina, Brazil
J.R.A. Filho, B. Firpo, A.V. Colling, E.M. Vigânico, C.H. Schneider and I.A.H. Schneider (Universidade Federal do Rio Grande do Sul, Brazil)

Utilization of ashes from the leather shaving incineration as a source of chromium for the production of HC-FeCr alloy
C.R. Alves, N.C. Heck and I.A.H. Schneider (Universidade Federal do Rio Grande do Sul, Brazil)

 

 

© 1998-2017, Minerals Engineering International


Email: amanda@min-eng.com