Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

F. Hao, K.J. Davey, W.J. Bruckard, J.T. Woodcock, Online analysis for xanthate in laboratory flotation pulps with a UV monitor, International Journal of Mineral Processing, Vol.89 No.1-4, 2008

A.M. Elmahdy, M. Mirnezami, J.A. Finch, Zeta potential of air bubbles in presence of frothers, International Journal of Mineral Processing, Vol.89 No.1-4, 2008

El-Reheim, F.H.A. et al, Adsorption mechanism of amphoteric collector on silica and hematite, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.3, 2008

R.A. Kumbasar, Selective separation of chromium (VI) from acidic solutions containing various metal ions through emulsion liquid membrane using trioctylamine as extractant, Separation and Purification Technology, Vol. 64, No. 1, 2008

Y. Zuo, J. Chen, D. Li, Reversed micellar solubilization extraction and separation of thorium(IV) from rare earth(III) by primary amine N1923 in ionic liquid, Separation and Purification Technology, Vol. 63, No. 3, 2008

R.A. Kumbasar, Transport of cadmium ions from zinc plant leach solutions through emulsion liquid membrane-containing Aliquat 336 as carrier, Separation and Purification Technology, Vol. 63, No. 3, 2008

Lu, P., Solvent extraction of gold(I) from alkaline cyanide solution by dibutylcarbitol with n-octanol, Journal of Chemical Technology & Biotechnology, Vol.83 No.11, 2008

Sharifah, M., Extraction and separation of molybdenum(VI) from acidic media by fatty hydrazides, Journal of Chemical Technology & Biotechnology, Vol.83 No.11, 2008

Sole, K.C., et al, Customizing copper-ion slectivity using modified aldoxime extractants, Canadian Metallurgical Quarterly, Vol.47 No.3, 2008

Forgan, R.S., et al, Copper extractant strength: the effect of substituents in the 3-position on hydroxyoxime performance, Canadian Metallurgical Quarterly, Vol.47 No.3, 2008

H. Zhong, G. Liu, L. Xia, Y. Lu, Y. Hu, S. Zhao, X. Yu, Flotation separation of diaspore from kaolinite, pyrophyllite and illite using three cationic collectors, Minerals Engineering, Vol. 21, No. 12-14, 2008

G. Liu, H. Zhong, T. Dai, L. Xia, Investigation of the effect of N-substituents on performance of thionocarbamates as selective collectors for copper sulfides by ab initio calculations, Minerals Engineering, Vol. 21, No. 12-14, 2008

S.W. Goh, A.N. Buckley, B. Gong, R. Woods, R.N. Lamb, Liang-Jen Fan, Yaw-wen Yang, Thiolate layers on metal sulfides characterised by XPS, ToF-SIMS and NEXAFS spectroscopy, Minerals Engineering, Vol. 21, No. 12-14, 2008

L.T. Cuba-Chiem, L. Huynh, J. Ralston, D.A. Beattie, In situ particle film ATR-FTIR studies of CMC adsorption on talc: The effect of ionic strength and multivalent metal ions, Minerals Engineering, Vol. 21, No. 12-14, 2008

E. Burdukova, G.C. Van Leerdam, F.E. Prins, R.G. Smeink, D.J. Bradshaw, J.S. Laskowski, Effect of calcium ions on the adsorption of CMC onto the basal planes of New York talc - A ToF-SIMS study, Minerals Engineering, Vol. 21, No. 12-14, 2008

A. Fredriksson, A. Holmgren, An in situ ATR-FTIR investigation of adsorption and orientation of heptyl xanthate at the lead sulphide/aqueous solution interface, Minerals Engineering, Vol. 21, No. 12-14, 2008

F. Cappuccitti, J.A. Finch, Development of new frothers through hydrodynamic characterization, Minerals Engineering, Vol. 21, No. 12-14, 2008

J.A. Finch, J.E. Nesset, C. Acuna, Role of frother on bubble production and behaviour in flotation, Minerals Engineering, Vol. 21, No. 12-14, 2008

R. Natarajan, I. Nirdosh, Quantitative structure-activity relationship (QSAR) approach for the selection of chelating mineral collectors, Minerals Engineering, Vol. 21, No. 12-14, 2008

J.A. Venter, M.K.G. Vermaak, Mechanisms of trithiocarbonate adsorption: A flotation perspective, Minerals Engineering, Vol. 21, No. 12-14, 2008

G.M.B. Batisteli, A.E.C. Peres, Residual amine in iron ore flotation, Minerals Engineering, Vol. 21, No. 12-14, 2008

R.K.T. Jha, J. Satur, N. Hiroyoshi, M. Ito, M. Tsunekawa, Carrier-microencapsulation using Si-catechol complex for suppressing pyrite floatability, Minerals Engineering, Vol. 21, No. 12-14, 2008

M.L.F. Gameiro, M.R.C. Ismael, M.T.A. Reis, J.M.R. Carvalho, Recovery of copper from ammoniacal medium using liquid membranes with LIX 54, Separation and Purification Technology, Vol. 63, No. 2, 2008

S. Kelebek, U. Demir, O. Sahbaz, A. Ucar, M. Cinar, C. Karaguzel, B. Oteyaka, The effects of dodecylamine, kerosene and pH on batch flotation of Turkey's Tuncbilek coal, International Journal of Mineral Processing, Vol.88 No.3-4, 2008

J. Rajesh Kumar, Hoo-In Lee, Jin-Young Lee, Joon-Soo Kim, Jeong-Soo Sohn, Comparison of liquid-liquid extraction studies on platinum(IV) from acidic solutions using bis(2,4,4-trimethylpentyl) monothiophosphinic acid, Separation and Purification Technology, Vol. 63, No. 1, 2008

Bina Gupta, Zareena Begum I, Separation and removal of arsenic from metallurgical solutions using bis(2,4,4-trimethylpentyl)dithiophosphinic acid as extractant, Separation and Purification Technology, Vol. 63, No. 1, 2008

Xiaoqi Sun, Bo Peng, Yang Ji, Ji Chen, Deqian Li, The solid-liquid extraction of yttrium from rare earths by solvent (ionic liquid) impreganated resin coupled with complexing method, Separation and Purification Technology, Vol. 63, No. 1, 2008

Bhattacharya, S., and Dey, S., Evaluation of frother performance in coal flotation: a critical review of existing methodologies, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.4, 2008

K. Fernando, F. Lucien, T. Tran, M.L. Carter, Ion exchange resins for the treatment of cyanidation tailings: Part 3 - Resin deterioration under oxidative acid conditions, Minerals Engineering, Vol. 21, No. 10, 2008

Yu-hua Wang, Chuan-bing Huang, Yue-hua Hu, Ye-min Hu, Ye Lan, Beneficiation of diasporic-bauxite ore by selective flocculation with a polyacrylate flocculant, Minerals Engineering, Vol. 21, No. 9, 2008

Ndlovu, B., and Mahlangu, T., Calcium and magnesium rejection from sulphate solutions in lateritic nickel solvent extraction using Versatic 10 acid-LIX 84-1C system, Journal of the South African Institute of Mining and Metallurgy, Vol.108, No.4, 2008

Gul, A., et al, Use of non-toxic depressants in the selective flotation of copper-lead-zinc ores, Canadian Metallurgical Quarterly, Vol.47 No.2, 2008

B. Himmi, B. Messnaoui, S. Kitane, A. Eddaif, A. Alaoui, A. Bouklouz, M. Soufiaoui, Study of Zn (II) extraction by 5-azidomethyl-8-hydroxyquinoline: Experiment and modelling, Hydrometallurgy, Vol. 93, No.1-2, 2008

V. Stankovic, L. Outarra, F. Zonnevijlle, Ch. Comninellis, Solvent extraction of silver from nitric acid solutions by calix[4]arene amide derivatives, Separation and Purification Technology, Vol. 61, No. 3, 2008

A.T. Owen, P.D. Fawell, J.D. Swift, D.M. Labbett, F.A. Benn, J.B. Farrow, Using turbulent pipe flow to study the factors affecting polymer-bridging flocculation of mineral systems, International Journal of Mineral Processing, Vol.87 No.3-4, 2008

J.A. Venter, M.K.G. Vermaak, EIS measurements of dithiocarbonate and trithiocarbonate interactions with pyrite and copper, Minerals Engineering, Vol.21 No.7, 2008

Mohapatra, D., and Park, K.H., Solvent extraction of Al(III) from sulfate solutions using bis (2,4,4-trimethylpentyl) phosphinic acid- mecanism and compexation, Minerals and Metallurgical Processing, Vol.25, No.2, 2008

E.D. Manev, S.V. Sazdanova, R.Tsekov, S.I. Karakashev, A.V. Nguyen, Adsorption of ionic surfactants, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.319 No.1-3, 2008

G. Petzold, V. Dutschk, M. Mende, R. Miller, Interaction of cationic surfactant and anionic polyelectrolytes in mixed aqueous solutions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.319 No.1-3, 2008

A. Parodi, T. Vincent, M. Pilsniak, A.W. Trochimczuk, E. Guibal, Palladium and platinum binding on an imidazol containing resin, Hydrometallurgy, Vol. 92, No.1-2, 2008

Marabini, A.M., et al, Thermodynamic approach for the evaluation of the reactivity of mercaptobenzothiazole reagents with Pb and Zn cations; correlation with results of flotation, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.1, 2008

G.C. da Silva, J.W.S.D. da Cunha, J. Dweck and J.C. Afonso, Liquid-liquid extraction (LLE) of iron and titanium by bis-(2-ethyl-hexyl) phosphoric acid (D2EHPA), Minerals Engineering, Vol. 21, No. 5, 2008

W. Shao, X. Li, Q. Cao, F. Luo, J. Li and Y. Du, Adsorption of arsenate and arsenite anions from aqueous medium by using metal(III)-loaded amberlite resins, Hydrometallurgy, Vol. 91, No.1-4, 2008

K.R. Barnard, LIX^®63 stability in the presence of Versatic 10 under proposed commercial extract and strip conditions, part I: Operation at high temperature, Hydrometallurgy, Vol. 91, No.1-4, 2008

K.R. Barnard and N.L. Turner, LIX^®63 stability in the presence of Versatic 10 under proposed commercial extract and strip conditions, part II: Oxime isomer inter-conversion and the effect of oxime degradation products on selected physical properties, Hydrometallurgy, Vol. 91, No.1-4, 2008

Kwang Soo Nam, Byoung Hi Jung, Jeon Woong An, Tae Jun Ha, Tam Tran and Myong Jun Kim, Use of chloride-hypochlorite leachants to recover gold from tailing, International Journal of Mineral Processing, Vol.86 No.1-4, 2008

A. Buch, M. Stambouli and D. Pareau, Kinetics of nickel(II) extraction by 2-ethylhexanal oxime in ammonium nitrate solutions, Separation and Purification Technology, Vol.60 No.2, 2008

Lin, H.K., et al, Reduction of cyanate to cyanide in cyanidation tailings under reducing environments. Minerals & Metallurgical Processing, Vol.25, No.1, 2008

Liu, G., et al, Investigation of the selectivity of ethoxylcarbonyl thionocarbamates during the flotation of copper sulfides. Minerals & Metallurgical Processing, Vol.25, No.1, 2008

C. Xiong, C. Yao and X. Wu, Adsorption of rhenium(VII) on 4-amino-1,2,4-triazole resin, Hydrometallurgy, Vol. 90, No.2-4, 2008

K.R. Barnard, Isolation and characterisation of the LIX(R)63 degradation products 5,8-diethyl-6,7-dodecanedione monooxime (keto-oxime) and 5,8-diethyl-6,7-dodecanediol (diol) and regeneration of oxime from keto-oxime, Hydrometallurgy, Vol. 90, No.2-4, 2008

J. Zeng, Z. Yin, A. Zhang, G. Qi and Q. Chen, Unusual effect of 1,2-octanediol on sodium aluminate solutions leading to inhibition of gibbsite crystallization, Hydrometallurgy, Vol. 90, No.2-4, 2008

P.K. Parhi, S. Panigrahi, K. Sarangi and K.C. Nathsarma, Separation of cobalt and nickel from ammoniacal sulphate solution using Cyanex 272, Separation and Purification Technology, Vol.59 No.3, 2008

H. Ren, Y. Li, S. Zhang, J. Wang and Z. Luan, Flocculation of kaolin suspension with the adsorption of N,N-disubstituted hydrophobically modified polyacrylamide, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.317 No.1-3, 2008

B. Ramachandra Reddy, S. Venkateswara Rao and D. Neela Priya, Selective separation and recovery of divalent Cd and Ni from sulphate solutions with mixtures of TOPS 99 and Cyanex 471 X, Separation and Purification Technology, Vol.59 No.2, 2008

P.K. Parhi and K. Sarangi, Separation of copper, zinc, cobalt and nickel ions by supported liquid membrane technique using LIX 84I, TOPS-99 and Cyanex 272, Separation and Purification Technology, Vol.59 No.2, 2008

S.I. El Dessouky, Y.A. El-Nadi, I.M. Ahmed, E.A. Saad and J.A. Daoud, Solvent extraction separation of Zn(II), Fe(II), Fe(III) and Cd(II) using tributylphosphate and CYANEX 921 in kerosene from chloride medium, Chemical Engineering and Processing: Process Intensification, Vol. 47, No. 2, 2008

D. Parajuli, K. Inoue, H. Kawakita, K. Ohto, H. Harada and M. Funaoka, Recovery of precious metals using lignophenol compounds, Minerals Engineering, Vol. 21, No. 1, 2008

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]