Choose a year: 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000/1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Refahi, A., et al, Comparison between Bond crushing energy and fracture energy of rocks in a jaw crusher using numerical simulation, Journal of the Southern African IMM, Vol. 109, No. 12, 2009

B. Alejo, A. Barrientos, Model for yield stress of quartz pulps and copper tailings, International Journal of Mineral Processing, Vol. 93, No. 3-4, 2009

T.Y. Liu, M.P. Schwarz, CFD-based multiscale modelling of bubble-particle collision efficiency in a turbulent flotation cell, Chemical Engineering Science, Vol. 64, No. 24, 2009

C.M. Moreno, J.R. Perez-Correa, A. Otero, Dynamic modelling of copper solvent extraction mixer-settler units, Minerals Engineering, Vol. 22, No. 15, 2009

E.F. Crespo, Kinetic model for the multi-spigot hydrosizer, Minerals Engineering, Vol. 22, No. 15, 2009

Kishalay Mitra, Multiobjective optimization of an industrial grinding operation under uncertainty, Chemical Engineering Science, Vol. 64, No. 23, 2009

D.R. Higgins, N.B. Gray, M.R. Davidson, Simulating particle agglomeration in the flash smelting reaction shaft, Minerals Engineering, Vol. 22, No. 14, 2009

P.W. Cleary, M.D. Sinnott, R.D. Morrison, Separation performance of double deck banana screens - Part 1: Flow and separation for different accelerations, Minerals Engineering, Vol. 22, No. 14, 2009

P.W. Cleary, M.D. Sinnott, R.D. Morrison, Separation performance of double deck banana screens - Part 2: Quantitative predictions, Minerals Engineering, Vol. 22, No. 14, 2009

M. Torres, A. Casali, A novel approach for the modelling of high-pressure grinding rolls, Minerals Engineering, Vol. 22, No. 13, 2009

Werther, J., et al, Use of the SolidSim flowsheet simulation system for holistic modeling of lignite beneficiation, AT Mineral Processing, No.3, 2009

Estrada-Ruiz, R.H., and Perez-Garibay, R., Neural networks to estimate bubble diameter and bubble size distribution of flotation froth surfaces, Journal of the Southern African IMM, Vol. 109, No. 7, 2009

O.M. Alruiz, S. Morrell, C.J. Suazo, A. Naranjo, A novel approach to the geometallurgical modelling of the Collahuasi grinding circuit, Minerals Engineering, Vol. 22, No. 12, 2009

T.A. Apelt, N.F. Thornhill, Inferential measurement of SAG mill parameters IV: Inferential model validation, Minerals Engineering, Vol. 22, No. 12, 2009

T.A. Apelt, N.F. Thornhill, Inferential measurement of SAG mill parameters V: MPC simulation, Minerals Engineering, Vol. 22, No. 12, 2009

B. Zhao, Modeling pressure drop coefficient for cyclone separators: A support vector machine approach, Chemical Engineering Science, Vol. 64, No. 19, 2009

S.L.A. Hennart, W.J. Wildeboer, P. van Hee, G.M.H. Meesters, Identification of the grinding mechanisms and their origin in a stirred ball mill using population balances, Chemical Engineering Science, Vol. 64, No. 19, 2009

L. McElroy, J. Bao, R.Y. Yang, A.B. Yu, Soft-sensors for prediction of impact energy in horizontal rotating drums, Powder Technology, Vol. 195, No. 3, 2009

J.J. Bezuidenhout, J.J. Eksteen, S.M. Bradshaw, Computational fluid dynamic modelling of an electric furnace used in the smelting of PGM containing concentrates, Minerals Engineering, Vol. 22, No. 11, 2009

C.A. Pickles, Thermodynamic modelling of the multiphase pyrometallurgical processing of electric arc furnace dust, Minerals Engineering, Vol. 22, No. 11, 2009

C.K. Ho, S.M. Wu, H.P. Zhu, A.B. Yu, S.T. Tsai, Experimental and numerical investigations of gouge formation related to blast furnace burden distribution, Minerals Engineering, Vol. 22, No. 11, 2009

H.P. Zhu, M. Rahman, A.B. Yu, J. Bridgwater, P. Zulli, Effect of particle properties on particle percolation behaviour in a packed bed, Minerals Engineering, Vol. 22, No. 11, 2009

J. Vilcaez, C. Inoue, Mathematical modeling of thermophilic bioleaching of chalcopyrite, Minerals Engineering, Vol. 22, No. 11, 2009

K.J. Dong, R.P. Zou, R.Y. Yang, A.B. Yu, G. Roach, DEM simulation of cake formation in sedimentation and filtration, Minerals Engineering, Vol. 22, No. 11, 2009

K.J. Dong, A.B. Yu, I. Brake, DEM simulation of particle flow on a multi-deck banana screen, Minerals Engineering, Vol. 22, No. 11, 2009

K.W. Chu, B. Wang, A.B. Yu, A. Vince, G.D. Barnett, P.J. Barnett, CFD-DEM study of the effect of particle density distribution on the multiphase flow and performance of dense medium cyclone, Minerals Engineering, Vol. 22, No. 11, 2009

B. Wang, K.W. Chu, A.B. Yu, A. Vince, Numerical studies of the effects of medium properties in dense medium cyclone operations, Minerals Engineering, Vol. 22, No. 11, 2009

C.T. Jayasundara, R.Y. Yang, B.Y. Guo, A.B. Yu, J. Rubenstein, Effect of slurry properties on particle motion in IsaMills, Minerals Engineering, Vol. 22, No. 11, 2009

E. Jorjani, H. Asadollahi Poorali, A. Sam, S. Chehreh Chelgani, Sh. Mesroghli, M.R. Shayestehfar, Prediction of coal response to froth flotation based on coal analysis using regression and artificial neural network, Minerals Engineering, Vol. 22, No. 11, 2009

C.W. Bakker, C.J. Meyer, D.A. Deglon, Numerical modelling of non-Newtonian slurry in a mechanical flotation cell, Minerals Engineering, Vol. 22, No. 11, 2009

J. Xia, A. Rinne, S. Gronstrand, Effect of turbulence models on prediction of fluid flow in an Outotec flotation cell, Minerals Engineering, Vol. 22, No. 11, 2009

T.N. Croft, M. Cross, A.K. Slone, A.J. Williams, C.R. Bennett, P. Blot, M. Bannear, R. Jones, CFD analysis of an induration cooler on an iron ore grate-kiln pelletising process, Minerals Engineering, Vol. 22, No. 9-10, 2009

W.R. Ketterhagen, J.S. Curtis, C.R. Wassgren, B.C. Hancock, Predicting the flow mode from hoppers using the discrete element method, Powder Technology, Vol. 195, No. 1, 2009

S. Fadda, A. Cincotti, A. Concas, M. Pisu, G. Cao, Modelling breakage and reagglomeration during fine dry grinding in ball milling devices, Powder Technology, Vol. 194, No. 3, 2009

A. Seyfi Erdem, S. Levent Ergun, The effect of ball size on breakage rate parameter in a pilot scale ball mill, Minerals Engineering, Vol. 22, No. 7-8, 2009

R.D. Morrison, P.W. Cleary, M.D. Sinnott, Using DEM to compare the energy efficiency of pilot scale ball and tower mills, Minerals Engineering, Vol. 22, No. 7-8, 2009

A. Farzanegan, S.M. Vahidipour, Optimization of comminution circuit simulations based on genetic algorithms search method, Minerals Engineering, Vol. 22, No. 7-8, 2009

A.L. Hinde, J.T. Kalala, The application of a simplified approach to modelling tumbling mills, stirred media mills and HPGR's, Minerals Engineering, Vol. 22, No. 7-8, 2009

C.L. Schneider, V.K. Alves, L.G. Austin, Modeling the contribution of specific grinding pressure for the calculation of HPGR product size distribution, Minerals Engineering, Vol. 22, No. 7-8, 2009

Luis Marcelo Tavares, R.M. de Carvalho, Modeling breakage rates of coarse particles in ball mills, Minerals Engineering, Vol. 22, No. 7-8, 2009

T.h. Neesse, J. Dueck, E. Djatchenko, Simulation of filter cake porosity in solid/liquid separation, Powder Technology, Vol. 193, No. 3, 2009

K.W. Chu, B. Wang, A.B. Yu, A. Vince, CFD-DEM modelling of multiphase flow in dense medium cyclones, Powder Technology, Vol. 193, No. 3, 2009

W. McBride, P.W. Cleary, An investigation and optimization of the `OLDS' elevator using Discrete Element Modeling, Powder Technology, Vol. 193, No. 3, 2009

P.J. Owen, P.W. Cleary, Prediction of screw conveyor performance using the Discrete Element Method (DEM), Powder Technology, Vol. 193, No. 3, 2009

G.R. Chandratilleke, A.B. Yu, R.L. Stewart, J. Bridgwater, Effects of blade rake angle and gap on particle mixing in a cylindrical mixer, Powder Technology, Vol. 193, No. 3, 2009

S. Chehreh Chelgani, E. Jorjani, Artificial neural network prediction of Al₂O₃ leaching recovery in the Bayer process--Jajarm alumina plant (Iran, Hydrometallurgy, Vol. 97, No. 1-2, 2009

M.S. Al-Batah, N.A.M. Isa, K.Z. Zamli, Z.M. Sani, K.A. Azizli, A novel aggregate classification technique using moment invariants and cascaded multilayered perceptron network, International Journal of Mineral Processing, Vol. 92, No. 1-2, 2009

C.L.Q. Silva, W. Penna, A.C.B. Araujo, R.P. Brito, L.G.S. Vasconcelos, J.J.N. Alves, Model fine tuning for prediction of hydrocyclone performance--An industrial case study, International Journal of Mineral Processing, Vol. 92, No. 1-2, 2009

Coursol, P., et al, Optimization of the Xstrata Copper-Horne smelter operation using discrete event simulation, CIM Magazine, Vol.4, No.2, 2009

R. Vuthaluru, M. Tade, H. Vuthaluru, Y. Tsvetnenko, L. Evans, J. Milne, Application of CFD modelling to investigate fluidized limestone reactors for the remediation of acidic drainage waters, Chemical Engineering Journal, Vol. 149, No.1-3, 2009

A. Raoufi, M. Shams, H. Kanani, CFD analysis of flow field in square cyclones, Powder Technology, Vol.191 No.3, 2009

F. Nunez, A. Cipriano, Visual information model based predictor for froth speed control in flotation process, Minerals Engineering, Vol. 22, No. 4, 2009

I. Nopens, H. Briesen, J. Ducoste, Celebrating a milestone in Population Balance Modeling, Chemical Engineering Science, Vol. 64, No. 4, 2009

M.M. Attarakih, C. Drumm, H.-J. Bart, Solution of the population balance equation using the sectional quadrature method of moments (SQMOM, Chemical Engineering Science, Vol. 64, No. 4, 2009

S.K. Soni, S.C. Shukla, G. Kundu, Modeling of particle breakage in a smooth double roll crusher, International Journal of Mineral Processing, Vol. 90, No. 1-4, 2009

T.Y. Liu, M.P. Schwarz, CFD-based modelling of bubble-particle collision efficiency with mobile bubble surface in a turbulent environment, International Journal of Mineral Processing, Vol. 90, No. 1-4, 2009

L.E. Patruno, C.A. Dorao, H.F. Svendsen, H.A. Jakobsen, Analysis of breakage kernels for population balance modelling, Chemical Engineering Science, Vol. 64, No. 3, 2009

N. Tsafnat, G. Tsafnat, A.S. Jones, Automated mineralogy using finite element analysis and X-ray microtomography, Minerals Engineering, Vol. 22, No. 2, 2009

J. Henriquez, P. Simms, Dynamic imaging and modelling of multilayer deposition of gold paste tailings, Minerals Engineering, Vol. 22, No. 2, 2009

M.E. Mellado, L.A. Cisternas, E.D. Galvez, An analytical model approach to heap leaching, Hydrometallurgy, Vol. 95, No. 1-2, 2009

L. McElroy, J. Bao, R.Y. Yang, A.B. Yu, A soft-sensor approach to flow regime detection for milling processes, Powder Technology, Vol. 188, No. 3, 2009