Choose a year: 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000/1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Eldin Wee Chuan Lim, Yi-Ren Chen, Chi-Hwa Wang, Rome-Ming Wu, Experimental and computational studies of multiphase hydrodynamics in a hydrocyclone separator system, Chemical Engineering Science, Vol. 65, No. 24, 2010

M. Yahyaei, S. Banisi, Spreadsheet-based modeling of liner wear impact on charge motion in tumbling mills, Minerals Engineering, Vol. 23, No. 15, 2010

M. Rezaeizadeh, M. Fooladi, M.S. Powell, S.H. Mansouri, N.S. Weerasekara, A new predictive model of lifter bar wear in mills, Minerals Engineering, Vol. 23, No. 15, 2010

A.K. Majumder, Modeling of particle fluid interactions in a flowing film concentrator, International Journal of Mineral Processing, Vol. 97, No. 1-4, 2010

K.E. Cole, G.D.M. Morris, J.J. Cilliers, Froth touch samples viewed with Scanning Electron Microscopy, Minerals Engineering, Vol. 23, No. 11-13, 2010

C.W. Bakker, C.J. Meyer, D.A. Deglon, The development of a cavern model for mechanical flotation cells, Minerals Engineering, Vol. 23, No. 11-13, 2010

G. Wierink, K. Heiskanen, Modelling bubble-particle interaction with dynamic surface tension, Minerals Engineering, Vol. 23, No. 11-13, 2010

G. Morris, S.J. Neethling, J.J. Cilliers, The effects of hydrophobicity and orientation of cubic particles on the stability of thin films, Minerals Engineering, Vol. 23, No. 11-13, 2010

J. Leiva, L. Vinnett, F. Contreras, J. Yianatos, Estimation of the actual bubble surface area flux in flotation, Minerals Engineering, Vol. 23, No. 11-13, 2010

M.P. Hay, R. Roy, A case study of optimising UG2 flotation performance. Part 1: Bench, pilot and plant scale factors which influence Cr₂O₃ entrainment in UG2 flotation, Minerals Engineering, Vol. 23, No. 11-13, 2010

M.P. Hay, A case study of optimising UG2 flotation performance part 2: Modelling improved PGM recovery and Cr₂O₃ rejection at Northam's UG2 concentrator, Minerals Engineering, Vol. 23, No. 11-13, 2010

K. Elsayed, C. Lacor, Optimization of the cyclone separator geometry for minimum pressure drop using mathematical models and CFD simulations, Chemical Engineering Science, Vol. 65, No. 22, 2010

A. Kepa, Division of outlet flow in a cyclone vortex finder--The CFD calculations, Separation and Purification Technology, Vol. 75, No. 2, 2010

J. Petersen, Modelling of bioleach processes: Connection between science and engineering, Hydrometallurgy, Vol. 104, No. 3-4, 2010

H. Schubert, Which demands should and can meet a separation model for hydrocyclone classification?, International Journal of Mineral Processing, Vol. 96, No. 1-4, 2010

E.J. Meyer, I.K. Craig, The development of dynamic models for a dense medium separation circuit in coal beneficiation, Minerals Engineering, Vol. 23, No. 10, 2010

A.Y. Ali, S.M. Bradshaw, Bonded-particle modelling of microwave-induced damage in ore particles, Minerals Engineering, Vol. 23, No. 10, 2010

Karimi, M., et al, Prediction of hydrocyclone performance using artificial neural networks, Journal of the Southern African IMM, Vol.110 No.5, 2010

Ochienf, A., et al, CFD simulation and experimental measurement of nickel solids concentration distribution in a stirred tank, Journal of the Southern African IMM, Vol.110 No.5, 2010

M. Kor, E. Abkhoshk, D. Tao, G.L. Chen, H. Modarres, Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique, Minerals Engineering, Vol. 23, No. 9, 2010

J. Tang, Li-jie Zhao, Jun-wu Zhou, H. Yue, Tian-you Chai, Experimental analysis of wet mill load based on vibration signals of laboratory-scale ball mill shell, Minerals Engineering, Vol. 23, No. 9, 2010

P.L.W. Man, A. Braumann, M. Kraft, Resolving conflicting parameter estimates in multivariate population balance models, Chemical Engineering Science, Vol. 65, No. 13, 2010

Pax, R.A., Understanding heavy mineral separation duties using finite element analysis, Journal of the Southern African IMM, Vol.110 No.2, 2010

J.V. Mehrabani, M. Noaparast, S.M. Mousavi, R. Dehghan, A. Ghorbani, Process optimization and modelling of sphalerite flotation from a low-grade Zn-Pb ore using response surface methodology, Separation and Purification Technology, Vol. 72, No. 3, 2010

H. Tao, B. Jin, W. Zhong, X. Wang, B. Ren, Y. Zhang, R. Xiao, Discrete element method modeling of non-spherical granular flow in rectangular hopper, Chemical Engineering and Processing: Process Intensification, Vol. 49, No. 2, 2010

K.J. Dong, S.B. Kuang, A. Vince, T. Hughes, A.B. Yu, Numerical simulation of the in-line pressure jig unit in coal preparation, Minerals Engineering, Vol. 23, No. 4, 2010

J.-S. Kroll-Rabotin, F. Bourgeois, E. Climent, Fluid dynamics based modelling of the Falcon concentrator for ultrafine particle beneficiation, Minerals Engineering, Vol. 23, No. 4, 2010

R. Gers, E. Climent, D. Legendre, D. Anne-Archard, C. Frances, Numerical modelling of grinding in a stirred media mill: Hydrodynamics and collision characteristics, Chemical Engineering Science, Vol. 65, No. 6, 2010

A. Refahi, J. Aghazadeh Mohandesi, B. Rezai, Discrete element modeling for predicting breakage behavior and fracture energy of a single particle in a jaw crusher, International Journal of Mineral Processing, Vol. 94, No. 1-2, 2010

B. Sarkar, A. Das, A comparative study of slip velocity models for the prediction of performance of floatex density separator, International Journal of Mineral Processing, Vol. 94, No. 1-2, 2010

H. Lee, H. Cho, J. Kwon, Using the discrete element method to analyze the breakage rate in a centrifugal/vibration mill, Powder Technology, Vol. 198, No. 3, 2010

M. Massinaei, R. Doostmohammadi, Modeling of bubble surface area flux in an industrial rougher column using artificial neural network and statistical techniques, Minerals Engineering, Vol. 23, No. 2, 2010

M.Sh. Bafghi, A.H. Emami, A. Zakeri, J. Vahdati Khaki, Development and verification of a mathematical model for variations of the specific surface area of mineral powders during intensive milling, Powder Technology, Vol. 197, No. 1-2, 2010