Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Munger, D., and Vincent, A., Electric Boundary Conditions at the Anodes in Aluminum Reduction Cells, Metallurgical & Materials Transactions B, Vol.37B No.6, 2006

Zhang, M., et al, Ionic liquid metallurgy: novel electrolytes for metals extraction and refining technology, Minerals & Metallurgical Processing , Vol.23 No.4, 2006

Brisson, P.Y., et al, Investigation of electrolyte penetration in three carbon cathode materials for aluminium electrolysis cells, Canadian Metallurgical Quarterly, Vol.45 No.4, 2006

W. Xue-Wen, C. Qi-Yuan, Y. Zhou-Lan and X. Lian-Sheng, Identification of arsenato antimonates in copper anode slimes, Hydrometallurgy, Vol.84 No.3-4, 2006

A. Agrawal, S. Kumari, D. Bagchi, V. Kumar and B.D. Pandey, Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders, Hydrometallurgy, Vol.84 No.3-4, 2006

C. Fabian, M.J. Ridd and M. Sheehan, Rotating cylinder electrode study of the effect of activated polyacrylamide on surface roughness of electrodeposited copper, Hydrometallurgy, Vol.84 No.3-4, 2006

L. Cifuentes, G. Crisóstomo and M. Mella, Predicting the coverage ratio of copper electrodeposits obtained on mesh cathodes, Minerals Engineering, Vol.19 No.13, 2006

Zhou, Z.H., and Ruan, J.M., Purification of InCl₃ electrolyte by ion exchange., Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.3, 2006

T.Z. Fahidy, A Markovian analysis of the propagation kinetics of anode slimes in electrorefining cells, Hydrometallurgy, Vol.84 No.1-2, 2006

C. Lupi, M. Pasquali and A. Dell'Era, Studies concerning nickel electrowinning from acidic and alkaline electrolytes, Minerals Engineering, Vol.19 No.12, 2006

Silny, A., et al, Carbon consumption during laboratory aluminium electrolysis, Canadian Metallurgical Quarterly, Vol.45 No.3, 2006

J. Xue, Q. Wu, Z. Wang and S. Yi, Function of additives in electrolytic preparation of copper powder, Hydrometallurgy, Vol.82 No.3-4, 2006

van Tonder, C., and Sole, M.J., Innovations in precious metals recovery, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.4, 2006

L. Cifuentes, I. García, R. Ortiz and J.M. Casas, The use of electrohydrolysis for the recovery of sulphuric acid from copper-containing solutions, Separation and Purification Technology, Vol.50 No.2, 2006

Fray, D.J., Innovative electrochemical processing using molten salts, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.1, 2006

L. Cifuentes, M. Grageda, G. Crisostomo, Electrowinning of copper in two- and three-compartment reactive electrodialysis cells, Chemical Engineering Science, Vol.61 No.11, 2006

Pistorius, P.C. and Fray, D.J., Formation of silicon by electro-deoxidation and implications for titanium metal production, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.1, 2006

Schlitt, W.J., Kennecott's million-ton test heap- the active leach program, Minerals & Metallurgical Processing, Vol.23 No.1, 2006

A. Rojo, H.K. Hansen, L.M. Ottosen, Electrodialytic remediation of copper mine tailings: Comparing different operational conditions, Minerals Engineering, Vol.19 No.5, 2006

F.A. Lemos, L.G.S. Sobral, A.J.B. Dutra, Copper electrowinning from gold plant waste streams, Minerals Engineering, Vol.19 No.5, 2006

McFadden, F.J. et al, The Multivariable Model-Based Control of the Non-Alumina Electrolyte Variables in Aluminum Smelting Cells, JOM, Vol.58 No.2, 2006

Piskazhova, T.V. and Mann, V.C., The Use of a Dynamic Aluminium Cell Model, JOM, Vol.58 No.2, 2006

Arkhipov. G.V., The Mathematical Modeling of Aluminum Reduction Cells, JOM, Vol.58 No.2, 2006

Schoning, C., and Grande, T., The Stability of Refractory Oxides in Sodium-Rich Environments, JOM, Vol.58 No.2, 2006

Cifuentes, L., and Mella, M., On the physical quality of copper electrodeposits obtained on mesh cathodes, Canadian Metallurgical Quarterly, Vol.45 No.1, 2006

Balomenos, E., et al, Modeling chemical equilibrium of electrolyte solutions, Mineral Processing and Extractive Metallurgy Review, Vol.27 No.1, 2006

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]

Read about Electrometallurgy:
Amalgam and Electrometallurgy
by Fathi Habashi
Plasma Metallurgy: The Principles
by Vladimir Dembovsky
Welding and Surfacing Reviews: Special Electrometallurgy
by B. I. Medovar