Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

Juckes, L. M., Dicalcium silicate in blast-furnace slag: a critical review of the implications for aggregate stability. Trans.IMM, Sec. C, Volume 111 Sept/Dec (2002)

Halikia, I. Skartados, K. Neou-Syngouna, P., Effect of reductive roasting on smelting characteristics of Greek nickel laterites. Trans.IMM, Sec. C, Volume 111 Sept/Dec (2002)

Esquivel, M. R. Bohe, A. E. Pasquevich, D. M, Carbochlorination of cerium dioxide. Trans.IMM, Sec. C, Volume 111 Sept/Dec (2002)

Markotic, A., Dolic, N., and Trujic, V., State of direct reduction smelting processes. Journal of Mining and Metallurgy, Volume 38 Numbers 3-4, Section B (2002)

Biktagirov, F.K., Application of electroslag process with non-consumable electrodes for melting, refining and treatment of metals. Part 1. Advances in Electrometallurgy, Vol.4, 2002

Paton, B.E., and Medovar, L.B., Special electrometallurgy at the beginning of the XXI century. Advances in Electrometallurgy, Vol.4, 2002

Moskalyk, R.R., and Alfantazi, A.M., Nickel sulphide smelting and electrorefining pracice: a review. Mineral Processing and Extractive Metallurgy Review, Vol.23 Numbers 3-4, 2002

Paton, B.E., Medovar, L.B., and Saenko, V.Y., Improvement of efficiency in ESR metal production. Advances in Electrometallurgy, Issue 3, 2002

Ferron, C. J. Fleming, C. A. O Kane, P. T. Dreisinger, D., Pilot plant demonstration of the Platsol process for the treatment of the NorthMet copper-nickel-PGM deposit. Mining Engineering, Vol.54 No.12, 2002

Yildirim, M., Sulphation roasting and leaching of a low-grade copper ore from Ergani-Maden, Turkey. Trans. IMM Section C, Vol. 111/Proc. Australas.IMM, Vol.307, Jan.-April 2002

Loo, C.E., and Leaney, J.C.M., Characterizing the contribution of the high-temperature zone to iron ore sinter bed permeability. Trans. IMM Section C, Vol. 111/Proc. Australas.IMM, Vol.307, Jan.-April 2002

Street, S.J., Brooks, G.A., and Subagyo, Heat-transfer considerations in the bath smelting of composite organic and ferrous wastes. Trans. IMM Section C, Vol. 111/Proc. Australas.IMM, Vol.307, Jan.-April 2002

Loo, C.E., Dukino, R.D., and Witchard, D., Rigidity of iron ore sinter mixes. Trans. IMM Section C, Vol. 111/Proc. Australas.IMM, Vol.307, Jan.-April 2002

Diaz, C. M. Warczok, A. Riveros, G. Echeverria, P., Factors Governing Slag Cleaning in an Electric Furnace. Canadian Metallurgical Quarterly, Vol.41 Number 4 (2002)

Stephens, R. L., Thermophysical Properties of Molten Slags. JOM, Vol.54 Number 11 (2002)

Kondratiev, A. Jak, E. Hayes, P. C., Predicting Slag Viscosities in Metallurgical Systems. JOM, Vol.54 Number 11 (2002)

Sridhar, S., Estimation Models for Molten Slag and Alloy Viscosities. JOM, Vol.54 Number 11 (2002)

Zhang, L. Jahanshahi, S. Sun, S. Chen, C. Bourke, B. Wright, S. Somerville, M., CSIRO's Multiphase Reaction Models and Their Industrial Applications. JOM, Vol.54 Number 11 (2002)

Pal, U. B., Determining Physio-Chemical Properties of Slags by Electrical Measurements. JOM, Vol.54 Number 11 (2002)

Aune, R. E. Hayashi, M. Nakajima, K. Seetharaman, S., Thermophysical Properties of Silicate Slags. JOM, Vol.54 Number 11 (2002)

Amer, A. M., Extracting Aluminum from Dross Tailings. JOM, Vol.54 Number 11 (2002)

W. Banda, N. Morgan, J.J. Eksteen. The role of slag modifiers on the selective recovery of cobalt and copper from waste smelter slag. Minerals Engineering, Vol.15, no.11 (supplement), 2002

G.A. Georgalli, J.J. Eksteen, M.A. Reuter. An integrated thermochemical-systems approach to the prediction of matte composition dynamics in an Ausmelt nickel-copper matte converter. Minerals Engineering, Vol.15, no.11 (supplement), 2002

T. Coetsee, P.C. Pistorius, E.E. de Villiers. Rate-determining steps for reduction in magnetite-coal pellets. Minerals Engineering, Vol.15, no.11 (supplement), 2002

J.J. Eksteen, S.J. Frank, M.A. Reuter. Dynamic structures in variance based data reconciliation adjustments for a chromite smelting furnace. Minerals Engineering, Vol.15, no.11 (supplement), 2002

M.A. Abdel-latif. Fundamentals of zinc recovery from metallurgical wastes in the Enviroplas process. Minerals Engineering, Vol.15, no.11 (supplement), 2002

M.A. Abdel-latif. Recovery of vanadium and nickel from petroleum flyash. Minerals Engineering, Vol.15, no.11 (supplement), 2002

Y. Xiao, M.A. Reuter. Recycling of distributed aluminium turning scrap. Minerals Engineering, Vol.15, no.11 (supplement), 2002

J. Pesl, R.H. Eric. High temperature carbothermic reduction of Fe₂O₃-TiO₂-MxOy oxide mixtures. Minerals Engineering, Vol.15, no.11 (supplement), 2002

R.T. Jones, Q.G. Reynolds, M.J. Alport. DC arc photography and modelling. Minerals Engineering, Vol.15, no.11 (supplement), 2002

Q. Reynolds. Thermal radiation modelling of DC smelting furnace freeboards. Minerals Engineering, Vol.15, no.11 (supplement), 2002

I.J. Kotze. Pilot plant production of ferronickel from nickel oxide ores and dusts in a DC arc furnace. Minerals Engineering, Vol.15, no.11 (supplement), 2002

B. Das, S. Prakash, P. S. R. Reddy, S. K. Biswal, B. K. Mohapatra, V. N. Misra. Effective Utilization of Blast Furnace Flue Dust of Integrated Steel Plants. European Journal of Mineral Processing and Environmental Protection, vol.2 no.2, 2002

Welham, N.J., Activation of the carbothermic reduction of manganese ore. International Journal of Mineral Processing, vol.67 no.1-4, 2002

Ojeda, M.W., Rivarola, J.B., and Quiroga, O.D., Study on chlorination of molybdenum trioxide with carbon black. Minerals Engineering, Vol.15, no.8, 2002

Valix, M., and Cheung, W.H., Study of phase transformation of laterite ores at high temperature. Minerals Engineering, Vol.15, no.8, 2002

Perez-Tello, M. Tirado-Ochoa, J. A. Sohn, H. Y. Sanchez-Corrales, V. M., Size Distribution Analysis for Copper Matte Particles Oxidized Under Flash-Converting Conditions. JOM, Vol. 54 No.10, 2002

Ahmed, Y.M.Z., El-Toni, A., Ibrahim, I.A., and Shalabi, I.M.E.H., Optimization the pelletization conditions of barite concentrate with coal mixture for barium sulfide production. The European Journal of Mineral Processing and Environmental Protection, Vol. 2 Number 2 (2002)

Verdeja, L.F., Sancho, J.P., and Verdeja, J.I., Iron and steel making in the third millenium. CIM Bulletin Vol. 95 No. 1063, July 2002

Yoshida, A. Yasui, M. Uchida, Y. Kosugi, K. Myochin, M. McLean, A. Iwase, M., Evaluation of Cupric/Cuprous Red-Ox Equilibria and the Basicity of Alkaline Sulfate Melts. Canadian Metallurgical Quarterly, Vol. 41 Number 3 (2002)

Pistorius, P. C. le Roux, J. T. F., Thermal, Chemical and Structural Changes during Initial Chlorination of Titania Slag. Canadian Metallurgical Quarterly, Vol. 41 Number 3 (2002)

Ostrovski, O. Olsen, S. E. Tangstad, M. Yastreboff, M., Kinetic Modelling of MnO Reduction from Manganese Ore. Canadian Metallurgical Quarterly, Vol. 41 Number 3 (2002)

Masters, I. M. Piret, N. L. Short, W., Combined Dynatec and Ausmelt Technologies for Zinc Refining. Erzmetall, Vol.55 No.7, 2002

S.K. Kawatra, S.J. Ripke. Effects of bentonite fiber formation in iron ore pelletization. International Journal of Mineral Processing, vol.65 no.3-4, 2002

S.K. Kawatra, S.J. Ripke. Pelletizing steel mill desulfurization slag. International Journal of Mineral Processing, vol.65 no.3-4, 2002

O.S. Sudah, A.W. Chester, J.A. Kowalski, J.W. Beeckman, F.J. Muzzio. Quantitative characterization of mixing processes in rotary calciners. Powder Technology, Vol.126 no.2, 2002

F. Testard, T. Zemb. Interpretation of phase diagrams: topological and thermodynamical constraints. Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.205 no.1-2, 2002

L.G. Bergh, P. Chacana, G. Achurra, P. Delgado. Improvements in the control of the injection system of copper concentrate in Teniente converters. Minerals Engineering, Vol.15, no.5, 2002

Jak, E. and Hayes, P., Phase Equilibria and Thermodynamics of Zinc Fuming Slags. Canadian Metallurgical Quarterly, Vol. 41 Number 2 (2002)

Nagamori, M. and Yazawa, A., The Quaternary Gibbs-Duhem Integration for Molten Cu-Fe-S-O Mattes at 1473 K. Canadian Metallurgical Quarterly, Vol. 41 Number 2 (2002)

Gruner, W., Carrier Gas Hot Extraction Methods - About Problems of the Determination of Oxygen, Nitrogen, Carbon, and Sulphur. Erzmetall, Vol. 55 Number 3, 2002

Jones, R.T., Denton, G.M., Reynolds, Q.G., Parker, J.A.L., and van Tonder, G.J.J., Recovery of cobalt from slag in a DC arc furnace at Chamishi, Zambia. J. South African IMM, Vol. 102 Number 1, Jan/Feb. 2002

Pitorius, P.C., Reductant selection in ferro-alloy production: the case for the importance of dissolution in the metal. J. South African IMM, Vol. 102 Number 1, Jan/Feb. 2002

Nyamai, C.M., Surapunt, S., and Itagaki, K., Phase relations in the Cu₂S-FeS-ZnS and Cu₂S-PbS-ZnS ternary systems at 1473K: extraction of zinc from sulphide ore using liquid copper as a reagent. CIM Bulletin, Vol. 95 Number 1059, March 2002

Zhang, Z. Reddy, R. G., Viscosities of lead silicate slags. Minerals and Metallurgical Processing, Vol. 19 Number 1, Feb. 2002

N.S. Srinivasan. Reduction of iron oxides by carbon in a circulating fluidized bed reactor. Powder Technology, Vol.124 no.1-2, 2002

G. Zhang, O. Ostrovski. Effect of preoxidation and sintering on properties of ilmenite concentrates. International Journal of Mineral Processing, vol.64 no.4, 2002

Ono, K. Suzuki, R. O., A New Concept for Producing Ti Sponge: Calciothermic Reduction. JOM, Vol. 54 Number 2, 2002

Morsi, I. M. El Barawy, K. A. Morsi, M. B. Abdel-Gawad, S. R., Silicothermic Reduction of Dolomite Ore under Inert Atmosphere. Canadian Metallurgical Quarterly, Vol. 41 No. 1, 2002

Gonzalez, J. Pasquevich, A. B. D. Del CRuiz, M., beta-Ta₂O₅ Carbochlorination with Different Types of Carbon. Canadian Metallurgical Quarterly, Vol. 41 No. 1, 2002

A.G. Abilov, Z. Zeybek, O. Tuzunalp, Z. Telatar. Fuzzy temperature control of industrial refineries furnaces through combined feedforward/feedback multivariable cascade systems. Chemical Engineering and Processing, vol.41 no.1, 2002

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]