Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Moghimi, Z.A. et al, An Investigation on the Temperature and Stability Behavior in the Levitation Melting of Nickel, Metallurgical & Materials Transactions B, Vol.37B No.6, 2006

Satoshi, I., et al, Feasibility Study of the New Rutile Extraction Process from Natural Ilmenite Ore Based on the Oxidation Reaction, Metallurgical & Materials Transactions B, Vol.37B No.6, 2006

Sutcu, H., and Dural, A., Effect of hydroxides on carbonization of bituminous coal, Coal Preparation, Vol.26 No.4, 2006

Singh, M., and Bjorkman, B., Strength of cement-bonded briquettes, Minerals & Metallurgical Processing , Vol.23 No.4, 2006

Y. Wang and Z. Yuan, Reductive kinetics of the reaction between a natural ilmenite and carbon, International Journal of Mineral Processing, Vol.81 No.3, 2006

Liu, J., and Utigard, T.A., Reduction of nickel-copper matte/oxysulfide slag, Canadian Metallurgical Quarterly, Vol.45 No.4, 2006

Mukherjee, P.S., et al, Effect of processing parameters on production of TiO₂ rich slag and iron from metallised ilmenite in a moving bed reactor, Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.4, 2006

R.K. Dube, The Extraction of Lead from Its Ores by the Iron-Reduction Process: A Historical Perspective, JOM, Vol.58 No.10, 2006

S.A. Ziebold and D.E. Azwell, Increasing the Capacity of High-Efficiency Diffusion Fiber Beds in Smelter Gas Plants, JOM, Vol.58 No.10, 2006

C.B. Solnordal et al, A Correlation-Based Model for Predicting Gas Extraction Performance in a Copper Converting Plant, JOM, Vol.58 No.10, 2006

A. MacRae and J. Lenz, S-Furnace Roof Modifications at Xstrata Copper, Timmins, Canada, JOM, Vol.58 No.10, 2006

Yen, J.Y., et al, Effect of composition and temperature on viscosities of lead blast furnace slags, Minerals & Metallurgical Processing, Vol.23 No.3, 2006

Anameric, B., et al, Carburization effects on pig iron nugget making, Minerals & Metallurgical Processing, Vol.23 No.3, 2006

Fan, Y., et al, Interaction of cupric ferrite, copper matte and slag at 1573K, Minerals & Metallurgical Processing, Vol.23 No.3, 2006

Kashani-Nejad, S., et al, Chlorination of MgOHCl with HCl gas, Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.3, 2006

J.J. Eksteen and M.A. Reuter, The Equilib-ARMAX approach to the dynamic modelling of the melt metallurgy in DC plasma arc smelting operations, Minerals Engineering, Vol.19 No.11, 2006

E. Scheepers, J.J. Eksteen and C. Aldrich, Optimisation of the lance injection desulphurisation of molten iron using dynamic modelling, Minerals Engineering, Vol.19 No.11, 2006

Gueguin, M., and Cardarelli, F., Chemistry and mineralogy of titania-rich slags. Part 1-hemo-ilmenite, sulphate, and upgraded titania slags, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.1, 2007

E. Scheepers, A.T. Adema, Y. Yang and M.A. Reuter, The development of a CFD model of a submerged arc furnace for phosphorus production, Minerals Engineering, Vol.19 No.10, 2006

J.C. van Dyk, S. Melzer and A. Sobiecki, Mineral matter transformation during Sasol-Lurgi fixed bed dry bottom gasification - utilization of HT-XRD and FactSage modelling, Minerals Engineering, Vol.19 No.10, 2006

F. O'Connor, W.H. Cheung and M. Valix, Reduction roasting of limonite ores: effect of dehydroxylation, International Journal of Mineral Processing, Vol.80 No.2-4, 2006

Thrunhofer, A., et al, Iron ore reduction in a continuously operated multistage lab-scale fluidized bed reactor -mathematical modeling and experimental results, Metallurgical and Materials Transactions B, Vol.37B No.4, 2006

Zhao, B., et al, Microstructures of ISF sinters in air, Canadian Metallurgical Quarterly, Vol.45 No.3, 2006

Gous, M., An overview of the Namakwa Sands ilmenite smelting operations, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.6, 2006

Hopf, M., and Rossouw, E., New opportunities- exhaustive monitored copper coolers for submerged arc furnaces, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.6, 2006

Lan, Y.Z. et al, Recovery of zinc from high fluorine bearing zinc oxide ore, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.2, 2006

Antony, M.P, et al, Alkali roasting of Indian chromite ores: thermodynamic and kinetic considerations, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.2, 2006

A.H. Nobari and M. Halali, An investigation on the calcination kinetics of zinc carbonate hydroxide and Calsimin zinc carbonate concentrate, Chemical Engineering Journal, Vol.121 No.2-3, 2006

R. Ebrahimi-Kahrizsangi, M.H. Abbasi and A. Saidi, Mechanochemical effects on the molybdenite roasting kinetics, Chemical Engineering Journal, Vol.121 No.2-3, 2006

Wu, C.M., et al, Carbothermic reduction of zinc sulfide in the presence of calcium carbonate, Metallurgical and Materials Transactions B, Vol.37B No.3, 2006

Matsuura, H., and Tsukihashi, F., Chlorination kinetics of ZnO woth Ar-Cl₂-O₂ gas and the effect of oxychloride formation, Metallurgical and Materials Transactions B, Vol.37B No.3, 2006

Schneider, M., and Evans, J.W., A new probe for detecting gas bubbles in liquid metals, Metallurgical and Materials Transactions B, Vol.37B No.3, 2006

Brandberg, J., and Sichen, D., Water vapor solubility in ladle-refining slags, Metallurgical and Materials Transactions B, Vol.37B No.3, 2006

Reddy, R.G., et al, Recovery of copper from copper blast furnace slag, Minerals & Metallurgical Processing, Vol.23 No.2, 2006

Y. Hua, C. Cai and Y. Cui, Microwave-enhanced roasting of copper sulfide concentrate in the presence of CaCO₃, Separation and Purification Technology, Vol.50 No.1, 2006

J. Moon and V. Sahajwalla, Investigation into the Role of the Boudouard Reaction in Self-Reducing Iron Oxide and Carbon Briquettes, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

I. Sohn and R.J. Fruehan, The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part II. The Reduction of Iron Oxide/Carbon Composites, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

I. Sohn and R.J. Fruehan, The Reduction of Iron Oxides by Volatiles in a Rotary Hearth Furnace Process: Part III. The Simulation of Volatile Reduction in a Multi-Layer RHF Process, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

T.S. Kho, D.R. Swinbourne, and T. Lehner, Cobalt Distribution during Copper Matte Smelting, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

M.L. de Vries and I.E. Grey, Influence of Pressure on the Kinetics of Synthetic Ilmenite Reduction in Hydrogen, Metallurgical and Materials Transactions B, Vol.37B No.2, 2006

Brooks, G., et al, The carbotheric route to magnesium, JOM, Vol.58 No.5, 2006

Chen, E., and Coley, K., Gas slag reaction kinetics in slag cleaning of copper slags, Canadian Metallurgical Quarterly, Vol.45 No.2, 2006

Mourao, M.B., et al, Kinetic compensation effect on the carbothermic reduction of iron oxides, Canadian Metallurgical Quarterly, Vol.45 No.2, 2006

Z. Yuan, X. Wang, C. Xu, W. Li and M. Kwauk, A new process for comprehensive utilization of complex titania ore, Minerals Engineering, Vol.19 No.9, 2006

Cutler, C.J., and Eksteen, J.J., Variance propagation in toll smelting operations treating multiple concentrate stockpiles, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.3, 2006

Dzingayi, E., Bindura Nickel Corporation smelter operations, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.3, 2006

Kotze, H., et al, Ilmenite smelting at Ticor SA, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.3, 2006

Coetzee, V., Common-sense improvements to electric smelting at Impala Platinum, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.3, 2006

Barati, M., and Coley, K.S., Electrical and Electronic Conductivity of CaO-SiO₂-FeO_x Slags at Various Oxygen Potentials: Part I. Experimental Results, Metallurgical & Materials Transactions B, Vol.37B No.1, 2006

Barati, M., and Coley, K.S., Electrical and Electronic Conductivity of CaO-SiO₂-FeO_x Slags at Various Oxygen Potentials: Part II. Mechanism and a Model of Electronic Conduction, Metallurgical & Materials Transactions B, Vol.37B No.1, 2006

Barati, M., and Coley, K.S., A Comprehensive Kinetic Model for the CO-CO₂ Reaction with Iron Oxide-Containing Slags, Metallurgical & Materials Transactions B, Vol.37B No.1, 2006

Kapilashrami, A., et al, Foaming of Slags under Dynamic Conditions, Metallurgical & Materials Transactions B, Vol.37B No.1, 2006

A.E.M Warner et al, JOM World Nonferrous Smelter Survey, Part III: Nickel: Laterite, JOM, Vol.58 No.4, 2006

Sturzenegger, M., et al, Solar extraction of copper: on application of concentrated sunlight in extractive metallurgy, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.1, 2006

Tripathy, P.K., and Rakhasia, R.H., Chemical processing of a low grade molybdenite concentrate to recover molybdenum, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.1, 2006

Schoukens, A.E.S., et al, Technological breakthrough of the Mintek thermal magnesium process, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.1, 2006

Jung, W.-G., and Sohn, H.-S., Kinetic study on lead removal from molten copper by gas bubbling, Canadian Metallurgical Quarterly, Vol.45 No.1, 2006

P. Weber, R.H. Eric, The reduction of chromite in the presence of silica flux, Minerals Engineering, Vol.19 No.3, 2006

E. Scheepers, Y. Yang, M.A. Reuter, A.T. Adema, A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production, Minerals Engineering, Vol.19 No.3, 2006

B. Zhou, Y. Yang, M.A. Reuter, U.M.J. Boin, Modelling of aluminium scrap melting in a rotary furnace, Minerals Engineering, Vol.19 No.3, 2006

J.C. van Dyk, Understanding the influence of acidic components (Si, Al, and Ti) on ash flow temperature of South African coal sources, Minerals Engineering, Vol.19 No.3, 2006

A.I. Collins, D. Danninger, R. Fernandez, M. Keaton, J. Keenan, Online optimization of a low pressure, high temperature oxidation refractory ore treatment plant, Minerals Engineering, Vol.19 No.3, 2006

Q.G. Reynolds, R.T. Jones, Twin-electrode DC smelting furnaces-Theory and photographic testwork, Minerals Engineering, Vol.19 No.3, 2006

S.A.C. Stadler, J.J. Eksteen, C. Aldrich, Physical modelling of slag foaming in two-phase and three-phase systems in the churn-flow regime, Minerals Engineering, Vol.19 No.3, 2006

G.A. Georgalli, M.A. Reuter, Modelling the co-ordination number of a packed bed of spheres with distributed sizes using a CT scanner, Minerals Engineering, Vol.19 No.3, 2006

R.H. Matjie, C. van Alphen, P.C. Pistorius, Mineralogical characterisation of Secunda gasifier feedstock and coarse ash, Minerals Engineering, Vol.19 No.3, 2006

P.C. Pistorius, T. Motlhamme, Oxidation of high-titanium slags in the presence of water vapour, Minerals Engineering, Vol.19 No.3, 2006

J.H. Zietsman, P.C. Pistorius, Modelling of an ilmenite-smelting DC arc furnace process, Minerals Engineering, Vol.19 No.3, 2006

C.S. Kucukkaragoz, R.H. Eric, Solid state reduction of a natural ilmenite, Minerals Engineering, Vol.19 No.3, 2006

A.J. du Toit, P. Gaylard, S. Jahanshahi, J. Nell, Iron redox-equilibria and sulphide capacity of PGM melter-type slags, Minerals Engineering, Vol.19 No.3, 2006

K.S. McIntosh, D. Auer, K.R. Koch, J.J. Eksteen, Integrating pyrometallurgy and robotic systems engineering: Fully automated fire assay laboratory for rapid PGE analysis, Minerals Engineering, Vol.19 No.3, 2006

J.H. Potgieter, M.A. Kabemba, A. Teodorovic, S.S. Potgieter-Vermaak, W.G. Augustyn, An investigation into the feasibility of recovering valuable metals from solid oxide compounds by gas phase extraction in a fluidised bed, Minerals Engineering, Vol.19 No.2, 2006

M. Pourabdoli, Sh. Raygan, H. Abdizadeh, K. Hanaei, Production of high titania slag by Electro-Slag Crucible Melting (ESCM) process , International Journal of Mineral Processing, Vol.78 No.3, 2006

V.C. Taty Costodes, C.F. Mausse, K. Molala, A.E. Lewis, A simple approach for determining particle size enlargement mechanisms in nickel reduction, International Journal of Mineral Processing, Vol.78 No.2, 2006

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]