Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

Warner, N.A., Conductive heating and melt circulation in pyrometallurgy. Mineral Processing and Extractive Metallurgy , Vol.112 No.3, 2003

Fernandez, R. R., Better temperature control of Newmont's roasters increased gold recovery. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Hanninen, M. J. Seppanen, T. E. Sundberg, C. R. Suardini, P. J., Internal carbon addition during hematite fluxed pellet production at the Tilden Mine. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Kawatra, S. K. Ripke, S. J., Sintering of magnetite pellets under oxidizing, neutral and reducing atmospheres. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Allen, N.R., The effect of roasting temperature on ilmenite particle rotation characteristics in a rotating magnetic field. Physical Separation in Science and Engineering, Vol.13, No.3, 2003

Steenkamp, J.D., and Pistorius, P.C., Kinetics of chromite vs ilmenite magnetization during oxidative roasting of ilmenite concentrates. J. South African IMM, Vol.103 No.8, 2003

Pistorius, P.C., Fundamentals of freeze lining behaviour in ilmenite smelting. J. South African IMM, Vol.103 No.8, 2003

Liu, Z., et al, Preparation of novel reducing agent and its application in copper pyrorefining. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

Kahvecioglu, O., Derin, B., and Yucel, O., Carbothermal recovery of zinc from brass ash. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

Pickles, C.A., Reaction of electric arc furnace dust with molten iron containing carbon. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

Yan, S., and Swinbourne, D.R., Distribution of germanium under lead smelting conditions. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

Swinbourne, D.R., Yan, S., Hoang, G., and Higgins, D., Thermodynamic modelling of cupellation: activity of AgO in molten PbO at 1000C. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

M. Sacramento de Magalhaes, P. Roberto Gomes Brandao, Microstructures of industrial sinters from Quadrilatero Ferrifero's iron ores, Minas Gerais State, Brazil. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

E. Eneroth, C. Bender Koch, Crystallite size of haematite from thermal oxidation of pyrite and marcasite--effects of grain size and iron disulphide polymorph. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

G.S. Camm, A.R. Butcher, D. Pirrie, P.K. Hughes, H.J. Glass, Secondary mineral phases associated with a historic arsenic calciner identified using automated scanning electron microscopy; a pilot study from Cornwall, UK. Mineral Engineering, Vol.16 No.11 (Supplement), 2003

H. Shen, E. Forssberg, An overview of recovery of metals from slags. Waste Management, Vol.23 No.10, 2003

M.B Mourão and C. Takano, Self-reducing pellets for ironmaking: reaction rate and processing. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

R.C. Gupta, Woodchar as a sustainable reductant for ironmaking in the 21st century. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

C. Takano and M.B. Mourao, Self-reducing pellets for ironmaking: mechanical behavior. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

T. Murakami and K. Nagata, New ironmaking process from the viewpoint of carburization and iron melting at low temperature. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

H. Ono-Nakazata, T. Usui, N. Kitamura and Y. Tsubone, Gaseous reduction behavior of iron oxide in mineral phases and in CaO-SiO2-FeO slag powder. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

W.-K. Lu, and D. Huang, Mechanisms of reduction of iron ore/coal agglomerates and scientific issues in RHFoperations. Mineral Processing and Extractive Metallurgy Review, Vol.24 No.3/4, 2003

Traulsen, H., Cost Structure of Primary Copper Production - Comparison of Conventional and Continuous Smelting Concepts. Erzmetall, Vol.56 No.9, 2003

Kaye, M. H. Jaansalu, K. M. Thompson, W. T., Phase Equilibrium in Metallic Systems. Canadian Metallurgical Quarterly, Vol.42 No.4, 2003

Camdali, U. Tunc, M., Energy and Energy Analysis of a Ladle Furnace. Canadian Metallurgical Quarterly, Vol.42 No.4, 2003

Crowe, C. J. B. Utigard, T. A., Kinetics of Carbon Monoxide Reduction of Oxidized Calcines. Canadian Metallurgical Quarterly, Vol.42 No.4, 2003

Ripke, S.J., and Kawatra, S.K., Effect of cations on unfired magnetite pellet strength. Minerals & Metallurgical Processing, Vol.20 No.3, August 2003

R.R. Moskalyk, A.M. Alfantazi, Review of copper pyrometallurgical practice: today and tomorrow. Mineral Engineering, Vol.16 No.10, 2003

P.C. Kapur, V. Runkana, Balling and granulation kinetics revisited. International Journal of Mineral Processing, Vol.72 No.1-4, 2003

S.K. Kawatra, S.J. Ripke, Laboratory studies for improving green ball strength in bentonite-bonded magnetite concentrate pellets. International Journal of Mineral Processing, Vol.72 No.1-4, 2003

Mager, K. Meurer, U. Wirling, J, Minimizing Dioxin and Furan Emissions during Zinc Dust Recycle by the Waelz Process. JOM, Vol.55 No.8, 2003

Barakat, M. A., The Pyrometallurgical Processing of Galvanizing Zinc Ash and Flue Dust. JOM, Vol.55 No.8, 2003

Bazin, C. Rochon-Tremblay, S. Gosselin, C., Estimation of Gas Flow Rates and Pellet Temperatures in an Iron Oxide Induration Furnace. Canadian Metallurgical Quarterly, Vol.43 No.3, 2003

Pownceby, M.I., and Clout, J.M.F., Importance of fine ore chemical composition and high temperature phase relations: applications to iron ore sintering and pelletising. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, April 2003

Varajao, C.A.C. et al, Bulk density as method of evaluating reducibility of hard hematite ore in direct reduction process. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, April 2003

Jouhari, A.K., et al, Use of ferro wastes in sinter making. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, April 2003

Khosa, J., Manuel, J., and Trudu, A., Results from preliminary investigation of particulate emission during sintering of iron ore. Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol. 112 No.1, April 2003

Eisele, T.C., and Kawatra, S.K., A review of binders in iron ore pelletization. Mineral Processing & Extractive Metallurgy Review, Vol.24 Number 1, 2003

S.P.E. Forsmo, A. Hagglund. Influence of the olivine additive fineness on the oxidation of magnetite pellets. International Journal of Mineral Processing, Vol.70 no. 1-4, 2003

Washburn, C. Hill, E., Mercury Retorts for the Processing of Precious Metals and Hazardous Wastes. JOM, Vol. 55 No.4, 2003

Y. Il Yoon, M. Wook Kim, Y. Seung Yoon, S.H. Kim. A kinetic study on medium temperature desulfurization using a natural manganese ore. Chemical Engineering Science, Vol.58 no.10, 2003

K. Higuchi, R.H. Heerema. Influence of sintering conditions on the reduction behaviour of pure hematite compacts. Minerals Engineering, Vol.16, no.5, 2003

Y.V. Swamy, B.B. Kar, J.K. Mohanty. Physico-chemical characterization and sulphatization roasting of low-grade nickeliferous laterites. Hydrometallurgy, Vol. 69 No.1-3, 2003

Witt, C. E., The Smelting Reactor Process of Harzer Zink GmbH. Erzmetall, Vol.56 No.2, 2003

Friedrich, B. Hammerschmidt, J. Stoephasius, J.-C., Aluminothermic Reduction of Titanium Oxide. Erzmetall, Vol.56 No.2, 2003

Svens, K. Kerstiens, B. Runkel, M., Recent Experiences with Modern Zinc Processing Technology. Erzmetall, Vol.56 No.2, 2003

Chen, T. T. Dutrizac, J. E., Characterization of the Calcines Produced by the Roasting of Zinc Sulphide Concentrates in a Torbed Reactor. Canadian Metallurgical Quarterly, Vol.42 No.1, 2003

Turkdogan, E. T., Rationale on the Parameters of Diffusion in Solid and Liquid Metals, Molten Halides And Slags. Canadian Metallurgical Quarterly, Vol.42 No.1. 2003

D.W. York. An industrial user's perspective on agglomeration development. Powder Technology, Vol.130 no.1-3, 2003

J.M.F. Clout, J.R. Manuel. Fundamental investigations of differences in bonding mechanisms in iron ore sinter formed from magnetite concentrates and hematite ores. Powder Technology, Vol.130 no.1-3, 2003

K. Szymocha. Industrial applications of the agglomeration process. Powder Technology, Vol.130 no.1-3, 2003

K.V.S. Sastry, P. Dontula, C. Hosten. Investigation of the layering mechanism of agglomerate growth during drum pelletization. Powder Technology, Vol.130 no.1-3, 2003

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]