Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Kononov, R., et al, Carbothermal reduction of manganese oxide in different gas atmospheres, Metallurgical and Materials Transactions B, Vol.39 No.5, 2008

Nightingale, S.A., and Monaghan, B.J., Kinetics of spinel formation and growth during dissolution of MgO in CaO-Al₂O₃-SiO₂ slag, Metallurgical and Materials Transactions B, Vol.39 No.5, 2008

Mohanty. S., et al, Thermodynamic considerations in reduction of nickeliferrous laterite by methane, Metallurgical and Materials Transactions B, Vol.39 No.5, 2008

Lynch, D.C., Henrian activity coefficient of Pb in Cu-Ni mattes, Canadian Metallurgical Quarterly, Vol.47 No.4, 2008

Banerjee, A., et al, Reduction kinetics of porous zinc oxide pellet with CO-N₂ gas mixture, Mineral Processing and Extractive Metallurgy (Trans, IMM C), Vol.117 No.4, 2008

Li, Q.J., and Hong, X., Mathematical simulation on reduction of fine iron oxide at low temperature, Mineral Processing and Extractive Metallurgy (Trans, IMM C), Vol.117 No.4, 2008

M. Barati, Dynamic simulation of pellet induration process in straight-grate system, International Journal of Mineral Processing, Vol.89 No.1-4, 2008

de Villiers, J.P.R., et al, The determination of Ti₂0₃ in titania slags: a comparison of different methods of analysis, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.3, 2008

Pal, J., et al, A comparative study for smelting of chromite ore, pellets, briquettes and sinter, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.3, 2008

Sundstrom, A.W., et al, A review of the physical properties of base metal mattes, Journal of the Southern African IMM, Vol.108 No.8, 2008

Jak, E., et al, Phase equilibria in the system FeO-Fe₂0₃-Al₂0₃-CaO-Si0₂ with applications to non-ferrous smelting slags, Journal of the Southern African IMM, Vol.108 No.8, 2008

Lampke, J.P., and Silge, S., Agglomeration by pelletizing discs- an important process in times of worldwide demand for iron ore, AT Aufbereitungs Technik, No.4, 2008

Olper, M., et al, Simplified Copper Production from Primary Concentrates: The Direct Electrorefining of White Metal/Copper Matte, Canadian Metallurgical Quarterly, Vol.47 No.3, 2008

D. Durinck, F. Engstrom, S. Arnout, J. Heulens, P.T. Jones, B. Bjorkman, B. Blanpain, P. Wollants, Hot stage processing of metallurgical slags, Resources, Conservation and Recycling, Vol.52 No.10, 2008

L. Winkel, I. Alxneit, M. Sturzenegger, Thermal decomposition of copper concentrates under concentrated radiation -- Mechanistic aspects of the separation of copper from iron sulfide phases, International Journal of Mineral Processing, Vol.88 No.1-2, 2008

V. Singh, S.M. Rao, Study the effect of chromite ore properties on pelletisation process, International Journal of Mineral Processing, Vol.88 No.1-2, 2008

Genevski, K., and Stefanova, V., Dispersed matte droplets in industrial slag melts from flash smelting furnace, CIM Magazine, Vol.3 No.5, 2008

Suzuki, R.O., and Ishikawa, H.J., Direct reduction of vanadium oxide in molten CaCl₂, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.2, 2008

Makinen, T., and Taskinen, P., State of the art in nickel smelting: direct Outokumpu nickel technology, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.2, 2008

Kongoli, F., et al, Liquidus relationships of calcium ferrite and ferrous calcium silicate slag in continuous copper converting, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.2, 2008

Lwamba, E., and Garbers-Craig, A.M., Control of the grain size distribution of the raw material mixture in the production of iron sinter, Journal of the South African Institute of Mining and Metallurgy, Vol.108, No.5, 2008

L. Winkel, J. Wochele, C. Ludwig, I. Alxneit, M. Sturzenegger, Decomposition of copper concentrates at high-temperatures: An efficient method to remove volatile impurities, Minerals Engineering, Vol. 21, No. 10, 2008

Kumar, M., and Patel, S.K., Characteristics of Indian non-coking coals and iron ore reduction by their chars for directly reduced iron production, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.3, 2008

Wang, J.-P., and Cho, W.D., Kinetics of copper oxide dissolution in Na₂O- based slags, Canadian Metallurgical Quarterly, Vol.47 No.2, 2008

Warner, N.A., Conceptual design for lower-energy primary aluminium, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Rhamdhani, M.A., et al, Basic nickel carbonate: Part I: Microstructure and phase changes during oxidation and reduction processes, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Rhamdhani, M.A., et al, Basic nickel carbonate: Part II: Microstructure evolution during industrial nickel production from basic nickel carbonate, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Stanko, N., et al, Phase equilibria in ferrous calcium silicate slags: Part I: Intermediate oxygen partial pressures in the temperature range 120^oC to 135^oC, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Stanko, N., et al, Phase equilibria in ferrous calcium silicate slags: Part II: Evaluation of experimental data and computer thermodynamic models, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Stanko, N., et al, Phase equilibria in ferrous calcium silicate slags: Part III: Copper-saturated slag at 125⁰C and 130⁰C at an oxygen partial pressure of 10-6 atm, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Stanko, N., et al, Phase equilibria in ferrous calcium silicate slags: Part IV: Liquidus temperatures and solubility of copper in "Cu₂O"-FeO-Fe₂O₃-CaO-SiO₂ slags at 125^oC and 130^oC at an oxygen partial pressure of 10-6 atm, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Zhao, B., et al, High temperature softening behaviour of Imperial Smelting Furnace sinters in air, Canadian Metallurgical Quarterly, Vol.47 No.2, 2008

Chowdhury, G.M., et al, Reduction kinetics of iron ore-graphite composite pellets in a packed-bed reactor under inert and reactive atmospheres, Metallurgical and Materials Transactions B, Vol.39 No.2, 2008

Bezuidenhout, J.J., et al, Computational fluid dynamic modelling of a waste-heat boiler associated with flash smelting of base metal sulphides, Journal of the Southern African IMM, Vol.108 No.3, 2008

Holloway, P.C., et al, Modification of Waelz kiln processing of La Oroya zinc ferrite, Minerals and Metallurgical Processing, Vol.25, No.2, 2008

Copeland, C.R., et al, Measuring and managing dust and nanoparticulates in pyrometallurgical processing, Minerals and Metallurgical Processing, Vol.25, No.2, 2008

Genevski, K., and Stefanova, V., Dispersed matte droplets in industrial slag melts from flash smelting furnace, Canadian Metallurgical Quarterly, Vol.47 No.1, 2008

Holloway, P.C., and Etsell, T.H., Transformational roasting in the treatment of metallurgical wastes, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.1, 2008

Bahgat, M., and Ahmed, Y.M.Z., Synthesis of nanocrystalline metallic iron from secondary iron oxide resources, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.1, 2008

Jak, E., and Hayes, P.C., Phase equilibria determination in complex slag systems, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.1, 2008

Solar, M.Y., et al, Selection of optimum ferronickel grade for smelting nickel laterites, CIM Magazine, Vol.3, No.2, 2008

Pistorius, P.C., Ilmenite smelting: the basics, Journal of the Southern African Institute of Mining & Metallurgy, Vol.108, No.1, 2008

Z. Deqing, L. Jian, P. Jian and H. Aoping, Sintering behaviours of chromite fines and the consolidation mechanism, International Journal of Mineral Processing, Vol.86 No.1-4, 2008

B. Saensunon, G.A. Stewart and R. Pax, A combined ⁵⁷Fe-Mössbauer and X-ray diffraction study of the ilmenite reduction process in a commercial rotary kiln, International Journal of Mineral Processing, Vol.86 No.1-4, 2008

S.P.E. Forsmo, S.-E. Forsmo, P.-O. Samskog and B.M.T. Bjorkman, Mechanisms in oxidation and sintering of magnetite iron ore green pellets, Powder Technology, Vol.183 No.2, 2008

Perez-Tello, M., et al, Model for the fragmentation of copper matte particles during flash converting. Minerals & Metallurgical Processing, Vol.25, No.1, 2008

Rosello, A., et al, Desulfurization rate during the copper blow in a Peirce-Smith Converter, Metallurgical and Materials Transactions B, Vol.39 No.1, 2008

T.C. Ooi, E. Aries, B.C.R. Ewan, D. Thompson, D.R. Anderson, R. Fisher, T. Fray and D. Tognarelli, The study of sunflower seed husks as a fuel in the iron ore sintering process, Minerals Engineering, Vol.21 No.2, 2008

T. Hidayat, M.A. Rhamdhani, E. Jak and P.C. Hayes, The characterization of nickel metal pore structures and the measurement of intrinsic reaction rate during the reduction of nickel oxide in H₂-N₂ and H₂-H₂O atmospheres, Minerals Engineering, Vol.21 No.2, 2008

E.A. Brocchi and F.J. Moura, Chlorination methods applied to recover refractory metals from tin slags, Minerals Engineering, Vol.21 No.2, 2008

V.M. Sokolov, V.D. Babyuk, Ye.A. Zhydkov and Yu.Ya. Skok, Aluminothermic studies of a liquid partial reduced ilmenite, Minerals Engineering, Vol.21 No.2, 2008

K. Kabezya and R.H. Eric, Study of dispersion phenomena in creusot loire uddeholm reactor, Minerals Engineering, Vol.21 No.2, 2008

Y. Zhang, P.V. Barr and T.R. Meadowcroft, Continuous scrap melting in a short rotary furnace, Minerals Engineering, Vol.21 No.2, 2008

B. Maramba and R.H. Eric, Phosphide capacities of ferromanganese smelting slags, Minerals Engineering, Vol.21 No.2, 2008

Kumar, M., et al, Characterization of properties and reduction behaviour of iron ores for application in sponge ironmaking, Mineral Processing and Extractive Metallurgy Review, Vol.29 No.2, 2008

C.A. Pickles, Thermodynamic analysis of the separation of zinc and lead from electric arc furnace dust by selective reduction with metallic iron, Separation and Purification Technology, Vol.59 No.2, 2008

P. Shanmuganathan, P. Lakshmipathiraj, S. Srikanth, A.L. Nachiappan and A. Sumathy, Toxicity characterization and long-term stability studies on copper slag from the ISASMELT process, Resources, Conservation and Recycling, Vol.52 No.4, 2008

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]