Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999/8

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Kohler, C.B., et al, End-of-life mode of failure of a zinc sulphide concentrate fluidized-bed roaster and its rebuilding. J. Southern African IMM, Vol. 107, No. 10, 2007

Marin, T., et al, Kinetics of liquid copper reduction with graphite, Canadian Metallurgical Quarterly, Vol.46 No.4, 2007

Anghelina, D., et al, High temperature behaviour of directly reduced iron fines, Canadian Metallurgical Quarterly, Vol.46 No.4, 2007

Khoshandam, B., et al, Kinetics of reduction of manganese oxide by methane, Canadian Metallurgical Quarterly, Vol.46 No.4, 2007

Yoshikawa, N., et al, Carbon reduction kinetics of NiO by microwave heating of the separated electric and magnetic fields, Metallurgical and Materials Transactions B, Vol.38 No.6, 2007

de Micco, G., et al, Chlorination of zinc oxide between 723 and 973K, Metallurgical and Materials Transactions B, Vol.38 No.6, 2007

Bahgat, M., et al, Physicochemical characterisation of V/Fe₂O₃ reaction products, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.4, 2007

Grey, I., et al, Hydrogen reduction of preoxidised ilmenite in fluidised bed and packed bed reactors, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.4, 2007

Fouga, G.G., et al, The kinetics and mechanism of selective iron chlorination of an ilmenite ore, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.4, 2007

A. Obut, Direct conversion of celestine to SrS by microwave heating, Minerals Engineering, Vol.20 No.14, 2007

C.J. Menendez, V.L. Barone, I.L. Botto and E.L. Tavani, Physicochemical characterization of the chlorination of natural wolframites with chlorine and sulphur dioxide , Minerals Engineering, Vol.20 No.14, 2007

Halikia, I., et al, Kinetic analysis of non-isothermal decomposition of dolomite in nitrogen atmosphere, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.3, 2007

Hakobyan, K.Y., et al, The oxidation of molybdenum sulphide concentrate with water vapour. Part 1- thermodynamic aspects, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.3, 2007

Hakobyan, K.Y., et al, The oxidation of molybdenum sulphide concentrate with water vapour. Part 2- macrokinetics and mechanism, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116, No.3, 2007

P.T.L. Koh, F.R.A. Jorgensen and B.J. Elliot, Solids falling in flash furnace burner concentrate chutes, International Journal of Mineral Processing, Vol.83 No.3-4, 2007

L. Winkel, I. Alxneit and M. Sturzenegger, New paths for a SO₂-free copper production, Minerals Engineering, Vol.20 No.12, 2007

S.A.C. Stadler, J.J. Eksteen and C. Aldrich, An experimental investigation of foaming in acidic, high FexO slags, Minerals Engineering, Vol.20 No.12, 2007

Barker, I.J., Surface tension during molten metal granulation, Metallurgical and Materials Transactions B, Vol.38 No.3, 2007

T. Lehner, Plenary lecture on the wise production and use of metals, Minerals Engineering, Vol.20 No.9, 2007

Gonzalez, C.A., et al, Copper matte penetration resistance of basic refractories, Metallurgical and Materials Transactions B, Vol.38 No.2, 2007

Verscheure, K., et al, Continuous fuming of zinc-bearing residues: Part I. Model Development, Metallurgical and Materials Transactions B, Vol.38 No.1, 2007

Verscheure, K., et al, Continuous fuming of zinc-bearing residues: Part II. The submerged-plasma zinc-fuming process, Metallurgical and Materials Transactions B, Vol.38 No.1, 2007

Hoang, G.B and Swinbourne, D.R., Indium distribution between FeO-CaO-SiO₂ slags and lead bullion at 1200C, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Fisher-White, M.J., et al, Removal of chrome spinels from Murray Basin ilmenites by low temperature roasting, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Lovel, R., et al, Iron ore sintering with charcoal, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Firth, A.R., Interactions among magnetite oxidation, calcination of carbonate minerals and melt formation in iron ore pellets, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Hida, Y., and Nosaka, N., Evaluation of iron ore fines from the viewpoint of their metallurgical properties in the sintering process, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.2, 2007

Roy, P., et al, Use a Cansolve SO₂ scrubbing system to better link your batch-operated furnace with its by-product sulphuric acid plant, Journal of Southern African IMM, Vol.107 No.5, 2007

Westcott, G., et al, Impala Platinum Smelter, Rustenburg- an integrated smelter off-gas treatment solution, Journal of Southern African IMM, Vol.107 No.5, 2007

G.-S. Lee and Y.J. Song, Recycling EAF dust by heat treatment with PVC, Minerals Engineering, Vol.20 No.8, 2007

Lynch, D.C., Henrian activity coefficient of Bi in Cu-Ni mattes, Canadian Metallurgical Quarterly, Vol.46 No.2, 2007

Pickles, C.A., Thermodynamic analysis of the selective reduction of electric arc furnace dust by hydrogen, Canadian Metallurgical Quarterly, Vol.46 No.2, 2007

Hazar-Yoruc, A.B., Reduction mechanism of chromite spinel with carbon, Minerals & Metallurgical Processing, Vol.24 No.2, 2007

K. Piotrowski, K. Mondal, T. Wiltowski, P. Dydo and G. Rizeg, Topochemical approach of kinetics of the reduction of hematite to wustite, Chemical Engineering Journal, Vol.131, No.1-3, 2007

L. Zhang, L.N. Zhang, M.Y. Wang, G.Q. Li and Z.T. Sui, Recovery of titanium compounds from molten Ti-bearing blast furnace slag under the dynamic oxidation condition, Minerals Engineering, Vol.20, No.7, 2007

Tshilombo, K.G., and Pistorius, P.C., Oxygen activity measurements in simulated converter matte. J. Southern African IMM, Vol. 107 No. 2, 2007

Coursol, P., et al, The Noranda continuous converter at Xstrata Copper, Rouyn-Noranda- optimization of slag chemistry, CIM Magazine, Vol.2 No.2, 2007

Wilkomirsky, I., et al, New technology for the abatement of SO₂ in non-ferrous pyrometallurgical processes by a dry limestone scrubber, CIM Magazine, Vol.2 No.2, 2007

Bakker, M.L., and Arthur, R.S., Growth and acceptance of the ISASMELT process, CIM Magazine, Vol.2 No.2, 2007

Galgali, R.K., et al, In-flight thermal plasma processing of prereduced ilmenite to produce titania rich slag, Canadian Metallurgical Quarterly, Vol.46 No.1, 2007

Pourabdoli, et al, A new process for the production of ferrotitanium from titania slag, Canadian Metallurgical Quarterly, Vol.46 No.1, 2007

Marcuson, S.W., and Diaz, C.M., The changing Canadian nickel smelting landscape- late 19th century to early 21st century, Canadian Metallurgical Quarterly, Vol.46 No.1, 2007

Magalhaes, M.S., et al, Types of goethite from Quadrilatero Ferrifero's iron ores and their implications in the sintering process, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.1, 2007

Brooks, G., et al, Challenges in light metals production, Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.116 No.1, 2007

Anameric, B., and Kawatra, S.K., Conditions for making direct reduced iron, transition direct reduced iron and pig iron nuggets in a laboratory furnace- temperature-time transformations, Minerals & Metallurgical Processing, Vol.24 No.1, 2007

Bulut, G., et al, Recovery of metal values from copper slags by flotation and roasting with pyrite, Minerals & Metallurgical Processing, Vol.24 No.1, 2007

Banerjee, A., Sen, P.K., and Roy, S.K., Novel approach to modeling of Imperial Smelting Furnace behavior, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.2, 2007

Tong, L.F., and Hayes, P., Mechanisms of the reduction of zinc ferrites in H₂/N₂ gas mixtures, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.2, 2007

P. Pourghahramani and E. Forssberg, Effects of mechanical activation on the reduction behavior of hematite concentrate, International Journal of Mineral Processing, Vol.82 No.2, 2007

A. Warczok and G. Riveros, Slag cleaning in crossed electric and magnetic fields, Minerals Engineering, Vol.20 No.1, 2007

G. Riveros and A. Warczok, Magnetohydrodynamic siphon for tapping out liquid metals, Minerals Engineering, Vol.20 No.1, 2007

Anameric, B., and Kawatra, S.K., Properties and features of direct reduced iron, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.1, 2007

Gueguin, M., and Cardarelli, F., Chemistry and mineralogy of titania-rich slags. Part 1-hemo-ilmenite, sulphate, and upgraded titania slags, Mineral Processing and Extractive Metallurgy Review, Vol.28 No.1, 2007

Subscribe!

Subscribe to the fortnightly MEI Online Update newsletter for a complete list of everything new added to the site in the past 2 weeks [more info]