Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

M. Schneider, T. Neesze, Overflow-control system for a hydrocyclone battery., International Journal of Mineral Processing, Vol.74 No.1001, 2004

S. Aman, J. Tomas, On-line determination of particle size during fine grinding based on luminescence properties of solids., International Journal of Mineral Processing, Vol.74 No.1001, 2004

D.-I.C. Wadenpohl, Production of powder coatings with defined particle size distribution by grinding and inline classification., International Journal of Mineral Processing, Vol.74 No.1001, 2004

A. Bauder, F. Muller, R. Polke, Investigations concerning the separation mechanism in deflector wheel classifiers., International Journal of Mineral Processing, Vol.74 No.1001, 2004

T. Neesse, V. Golyk, P. Kaniut, V. Reinsch, Hydrocyclone control in grinding circuits, Minerals Engineering, Vol.17 No.11-12, 2004

A.M. Bouwman, J.C. Bosma, P. Vonk, J.A. Wesselingh, H.W. Frijlink, Which shape factor(s) best describe granules?, Powder Technology, Vol.146 No.1-2, 2004

L.-Y. Chu, W. Yu, G.-J. Wang, X.-T. Zhou, W.-M. Chen, G.-Q. Dai, Enhancement of hydrocyclone separation performance by eliminating the air core, Chemical Engineering and Processing, Vol.43 No.12, 2004

Hua Zhu, Shirong Ge, Xiaoyan Yu, A Novel Low-Noise Vibrating Screen. Coal Preparation, Vol.24 No.1-2, 2004

R. Modrzewski and P. Wodzinski, A Linear-Elliptic Screen Part 1: Linear-Elliptic Screen Motion. Bulk Solids & Powder Science & Technology, Vol.1 No.1, 2004

E. Barsky and M. Barsky, Relationship between fractional separation curves and quantitative optimization criteria in the separation of pourable materials. Physical Separation in Science and Engineering, Vol.13 No.2, 2004

E. Barsky and M. Barsky, Master curve of separation processes. Physical Separation in Science and Engineering, Vol.13 No.1, 2004

B. Zhao, H. Shen, Y. Kang, Development of a symmetrical spiral inlet to improve cyclone separator performance., Powder Technology, Vol.145 No.1, 2004

V. Bricout, M.Y. Louge, Measurements of cyclone performance under conditions analogous to pressurized circulating fluidization., Chemical Engineering Science, Vol.59 No.15, 2004

Dass, R., The Ultimate Screener. Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.3, 2004

Lyko, H., Systems and examples for particle analysis in laboratory and process engineering. Filtrieren und Separieren, No.4, 2004

J.C. Cullivan, R.A. Williams, T. Dyakowski, C.R. Cross, New understanding of a hydrocyclone flow field and separation mechanism from computational fluid dynamics. Minerals Engineering, Vol.17 No.5, 2004

A.F. Nowakowski, J.C. Cullivan, R.A. Williams, T. Dyakowski, Application of CFD to modelling of the flow in hydrocyclones. Is this a realizable option or still a research challenge?. Minerals Engineering, Vol.17 No.5, 2004

M.D. Slack, S. Del Porte, M.S. Engelman, Designing automated computational fluid dynamics modelling tools for hydrocyclone design. Minerals Engineering, Vol.17 No.5, 2004

T.J. Olson, R. Van Ommen, Optimizing hydrocyclone design using advanced CFD model. Minerals Engineering, Vol.17 No.5, 2004

H.E. Grommers, J. Krikken, B.H. Bos, D.A. van der Krogt, Comparison of small hydrocyclones based on total process costs. Minerals Engineering, Vol.17 No.5, 2004

J.J. Cilliers, L. Diaz-Anadon, F.S. Wee, Temperature, classification and dewatering in 10 mm hydrocyclones. Minerals Engineering, Vol.17 No.5, 2004

J. Bergstrom, H. Vomhoff, Velocity measurements in a cylindrical hydrocyclone operated with an opaque fiber suspension. Minerals Engineering, Vol.17 No.5, 2004

M.A. Bennett, R.A. Williams, Monitoring the operation of an oil/water separator using impedance tomography. Minerals Engineering, Vol.17 No.5, 2004

C.A. Petty, S.M. Parks, Flow structures within miniature hydrocyclones. Minerals Engineering, Vol.17 No.5, 2004

D.N. Madge, J. Romero, W.L. Strand, Hydrocarbon cyclones in hydrophilic oil sand environments. Minerals Engineering, Vol.17 No.5, 2004

I.H. Yang, C.B. Shin, T.-H. Kim, S. Kim, A three-dimensional simulation of a hydrocyclone for the sludge separation in water purifying plants and comparison with experimental data. Minerals Engineering, Vol.17 No.5, 2004

K.A. Hashmi, H.A. Hamza, J.C. Wilson, CANMET hydrocyclone: an emerging alternative for the treatment of oily waste streams. Minerals Engineering, Vol.17 No.5, 2004

K. Nageswararao, D.M. Wiseman, T.J. Napier-Munn, Two empirical hydrocyclone models revisited. Minerals Engineering, Vol.17 No.5, 2004

T. Neesse, J. Dueck, L. Minkov, Separation of finest particles in hydrocyclones. Minerals Engineering, Vol.17 No.5, 2004

T. Neesse, M. Schneider, V. Golyk, H. Tiefel, Measuring the operating state of the hydrocyclone. Minerals Engineering, Vol.17 No.5, 2004

R. Delfos, S. Murphy, D. Stanbridge, Z. Olujic, P.J. Jansens, A design tool for optimising axial liquid-liquid hydrocyclones. Minerals Engineering, Vol.17 No.5, 2004

T. Neesse, M. Schneider, J. Dueck, V. Golyk, S. Buntenbach, H. Tiefel, Hydrocyclone operation at the transition point rope/spray discharge. Minerals Engineering, Vol.17 No.5, 2004

A. Mainza, M.S. Powell, B. Knopjes, Differential classification of dense material in a three-product cyclone. Minerals Engineering, Vol.17 No.5, 2004

H. Yoshida, T. Takashina, K. Fukui, T. Iwanaga, Effect of inlet shape and slurry temperature on the classification performance of hydrocyclones. Powder Technology, Vol.140 No.1-2, 2004

D. Woodfield, G. Bickert, Separation of flocs in hydrocyclones-significance of floc breakage and floc hydrodynamics. International Journal of Mineral Processing, Vol.73 No.2-4, 2004

S. Schuetz, G. Mayer, M. Bierdel, M. Piesche, Investigations on the flow and separation behaviour of hydrocyclones using computational fluid dynamics. International Journal of Mineral Processing, Vol.73 No.2-4, 2004

Morris, M., Cyclone design- an integrated approach. Filtration, Vol.4 No.1, 2004

Oja, M., et al, Evaluation of the screen performance in a wet grinding circuit. Filtration, Vol.4 No.1, 2004

B.H. Kim, M.S. Klima, Development and application of a dynamic model for hindered-settling column separations. Minerals Engineering, Vol.17 No.3, 2004

R.K. Dwari, M.N. Biswas, B.C. Meikap, Performance characteristics for particles of sand FCC and fly ash in a novel hydrocyclone. Chemical Engineering Science, Vol.59 No.3, 2004

S. Tran-Cong, M. Gay, E.E. Michaelides, Drag coefficients of irregularly shaped particles. Powder Technology, Vol.139 No.1, 2004

S.M. Olhero, J.M.F. Ferreira, Influence of particle size distribution on rheology and particle packing of silica-based suspensions. Powder Technology, Vol.139 No.1, 2004

S. Altmeyer, V. Mathieu, S. Jullemier, P. Contal, N. Midoux, S. Rode, J.-P. Leclerc, Comparison of different models of cyclone prediction performance for various operating conditions using a general software. Chemical Engineering and Processing, Vol.43 No.4, 2004