Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010: 2009 : 2008 : 2007: 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Stamboliadis, E.T., Impact crushing approach to the relationship of energy and particle size in comminution. The European Journal of Mineral Processing and Environmental Protection, Vol.3, No.2, 2003

Ellis, S. Gao, M., Development of ultrafine grinding at Kalgoorlie Consolidated Gold Mines. Minerals & Metallurgical Processing, Vol.20, No.4, 2003

Brodie, M.N., Variable speed SAG milling. CIM Bulletin, Vol.96 No.1075, 2003

Djordjevic, N., Discrete element modelling of lifter stresses in tumbling mill. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

El-Rahman, M.K., Rod mill kinetics of Egyptian feldspar. Mineral Processing and Extractive Metallurgy (Trans. IMM C), Vol.112 No.2, 2003

C. Tangsathitkulchai, Effects of slurry concentration and powder filling on the net mill power of a laboratory ball mill. Powder Technology, Vol.137 No.3, 2003

M. Lindqvist, C.M. Evertsson, Prediction of worn geometry in cone crushers. Minerals Engineering, Vol.16 No.12, 2003

T.W. Chenje, D.J. Simbi, E. Navara, Wear performance and cost effectiveness--a criterion for the selection of grinding media for wet milling in mineral processing operations. Minerals Engineering, Vol.16 No.12, 2003

C. Guimaraes, F. Durao, 2D simulation model of mineral particles yielded by discriminatory size reduction. Minerals Engineering, Vol.16 No.12, 2003

S. Mackinnon, D. Yan, R. Dunne, The interaction of flash flotation with closed circuit grinding. Mineral Engineering, Vol.16 No.11, 2003

K.L.C. Goncalves, V.L.L. Andrade, A.E.C. Peres, The effect of grinding conditions on the flotation of a sulphide copper ore. Mineral Engineering, Vol.16 No.11, 2003

Gao, M., Lane, G., Schwarz, P., and Holmes, R., Energy efficient technologies for fine and ultrafine grinding. AusIMM Bulletin, No.4, July/August 2003

Kaya, E., et al, Reproducibility of Bond grindability work index. Minerals & Metallurgical Processing, Vol.20 No.3, August 2003

N. Djordjevic, F.N. Shi, R.D. Morrison, Applying discrete element modelling to vertical and horizontal shaft impact crushers. Mineral Engineering, Vol.16 No.10, 2003

O. Hlungwani, J. Rikhotso, H. Dong, M.H. Moys, Further validation of DEM modeling of milling: effects of liner profile and mill speed. Mineral Engineering, Vol.16 No.10, 2003

J. Bridgwater, R. Utsumi, Z. Zhang, T. Tuladhar. Particle attrition due to shearing-the effects of stress, strain and particle shape. Chemical Engineering Science, Vol.58 No.20, 2003

L. Gaete-Garreton, Y. Vargas-Hernandez, A. Chamayou, J.A. Dodds, W.Valderama-Reyes, F. Montoya-Vitini. Development of an ultrasonic high-pressure roller press. Chemical Engineering Science, Vol.58 No.19, 2003

F. Shi, T. Kojovic, J.S. Esterle, D. David, An energy-based model for swing hammer mills. International Journal of Mineral Processing, Vol.71 No.1-4, 2003

B.K. Mishra, A review of computer simulation of tumbling mills by the discrete element method: Part I-contact mechanics. International Journal of Mineral Processing, Vol.71 No.1-4, 2003

B.K. Mishra, A review of computer simulation of tumbling mills by the discrete element method - Part II-Practical applications. International Journal of Mineral Processing, Vol.71 No.1-4, 2003

A quantification of the benefits of high pressure rolls crushing in an operating environment. Minerals Engineering, Vol.16 No. 9, 2003

O. Lecoq, N. Chouteau, M. Mebtoul, J.-F. Large, P. Guigon. Fragmentation by high velocity impact on a target: a material grindability test. Powder Technology, Vol.133 no.1-3, 2003

D. L. Marchisio, R. Dennis Vigil, R. O. Fox. Implementation of the quadrature method of moments in CFD codes for aggregation-breakage problems. Chemical Engineering Science, vol.58 no.15, 2003

Petersen, K.R.P., Lorenzen, L., and Amandale, D.J., The use of neural network analysis of diagnostic leaching data in gold liberation modelling. J. South African IMM, Vol. 103 Number 2 (March 2003)

H. Cho, L.G. Austin. An equation for the breakage of particles under impact. Powder Technology, Vol.132 no.2-3, 2003

T.W. Chenje, D.J. Simbi, E. Navara. The role of corrosive wear during laboratory milling. Minerals Engineering, Vol.16, no.7, 2003

S. Latchireddi, S. Morrell. Slurry flow in mills: grate-only discharge mechanism (Part-1). Minerals Engineering, Vol.16, no.7, 2003

S. Latchireddi, S. Morrell. Slurry flow in mills: grate-pulp lifter discharge systems (Part 2). Minerals Engineering, Vol.16, no.7, 2003

D.D. Ivezic, T.B. Petrovic. New approach to milling circuit control-robust inverse Nyquist array design. International Journal of Mineral Processing, Vol.70 no. 1-4, 2003

S. Mende, F. Stenger, W. Peukert, J. Schwedes. Mechanical production and stabilization of submicron particles in stirred media mills. Powder Technology, Vol.132 no.1, 2003

H. Dong, M.H. Moys. Measurement of impact behaviour between balls and walls in grinding mills. Minerals Engineering, Vol.16, no.6, 2003

A. Jankovic. Variables affecting the fine grinding of minerals using stirred mills. Minerals Engineering, Vol.16, no.4, 2003

N. Djordjevic. Discrete element modelling of the influence of lifters on power draw of tumbling mills. Minerals Engineering, Vol.16, no.4, 2003

V. Deniz, H. Ozdag. A new approach to Bond grindability and work index: dynamic elastic parameters. Minerals Engineering, Vol.16, no.3, 2003

P. Guigon, O. Simon. Roll press design-influence of force feed systems on compaction. Powder Technology, Vol.130 no.1-3, 2003

O. Simon, P. Guigon. Correlation between powder-packing properties and roll press compact heterogeneity. Powder Technology, Vol.130 no.1-3, 2003

F. Garcia, N. Le Bolay, C. Frances. Rheological behaviour and related granulometric properties of dense aggregated suspensions during an ultrafine comminution process. Powder Technology, Vol.130 no.1-3, 2003

N. Le Bolay. On agglomeration phenomena in ball mills: application to the synthesis of composite materials. Powder Technology, Vol.130 no.1-3, 2003

A.M. Kalinkin, E.V. Kalinkina, V.N. Makarov. Mechanical activation of natural titanite and its influence on the mineral decomposition. Int. J. Mineral Processing, Vol.69, no.1-4, 2003

H. Dong, M.H. Moys. Load behavior and mill power. Int. J. Mineral Processing, Vol.69, no.1-4, 2003

C. Tangsathitkulchai. The effect of slurry rheology on fine grinding in a laboratory ball mill. Int. J. Mineral Processing, Vol.69, no.1-4, 2003

L. Vogel, W. Peukert. Breakage behaviour of different materials-construction of a mastercurve for the breakage probability. Powder Technology, Vol.129 no.1-3, 2003