Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

S. Hong, S. Kim, Analysis of simulation result by digital filtering technique and improvement of hammer crusher, International Journal of Mineral Processing, Vol. 169, 2017

G.R. Ballantyne, B. Bonfils, M.S. Powell, Evolution of impact breakage characterisation: Re-defining t-family relationship, International Journal of Mineral Processing, Vol. 168, 2017

C. Li, Z. Gao, Effect of grinding media on the surface property and flotation behavior of scheelite particles, Powder Technology, Vol. 305, 2017

F.K. Mulenga, Sensitivity analysis of Austin's scale-up model for tumbling ball mills – Part 3. A global study using the Monte Carlo paradigm, Powder Technology, Vol. 305, 2017

T. Chen, Q. Fang, Z. Wang, W. Zhu, Numerical simulation of compression breakage of spherical particle, Chemical Engineering Science, Vol. 173, 2017

A. Rabieh, B. Albijanic, J.J. Eksteen, Influence of grinding media and water quality on flotation performance of gold bearing pyrite, Minerals Engineering, Vol. 112, 2017

Z. Zhang, T. Ren, J. Cheng, X. Jin, The improved model of inter-particle breakage considering the transformation of particle shape for cone crusher, Minerals Engineering, Vol. 112, 2017

J. Segura-Salazar, G.P. Barrios, V. Rodriguez, L.M. Tavares, Mathematical modeling of a vertical shaft impact crusher using the Whiten model, Minerals Engineering, Vol. 111, 2017

M. Hasan, S. Palaniandy, M. Hilden, M. Powell, Calculating breakage parameters of a batch vertical stirred mill, Minerals Engineering, Vol. 111, 2017

A. Mwanga, M. Parian, P. Lamberg, J. Rosenkranz, Comminution modeling using mineralogical properties of iron ores, Minerals Engineering, Vol. 111, 2017

A. Khademian, R. Bagherpour, Alteration of grindability of minerals due to applying different explosives in blasting operation, Minerals Engineering, Vol. 111, 2017

L. Little, A.N. Mainza, M. Becker, J. Wiese, Fine grinding: How mill type affects particle shape characteristics and mineral liberation, Minerals Engineering, Vol. 111, 2017

W. Yin, Y. Tang, Y. Ma, W. Zuo, J. Yao, Comparison of sample properties and leaching characteristics of gold ore from jaw crusher and HPGR, Minerals Engineering, Vol. 111, 2017

F.K. Mulenga, Effects of slurry hold-up on the pool volume of a batch mill, Minerals Engineering, Vol. 111, 2017

A.R. Batchelor, A.J. Buttress, D.A. Jones, J. Katrib, D. Way, T. Chenje, D. Stoll, C. Dodds, S.W. Kingman, Towards large scale microwave treatment of ores: Part 2 – Metallurgical testing, Minerals Engineering, Vol. 111, 2017

Marko M. Hilden, Malcolm S. Powell, A geometrical texture model for multi-mineral liberation prediction, Minerals Engineering, Vol. 111, 2017

E. Ghasemi Ardi, K.J. Dong, A.B. Yu, R.Y. Yang, A combined experimental and DEM approach to determine the breakage of particles in an impact mill, Powder Technology, Vol. 318, 2017

F. Kukurugya, E. Kim, P. Nielsen, L. Horckmans, J. Spooren, K. Broos, M. Quaghebeur, Effect of milling on metal leaching: Induction of galvanic effect in a secondary lead smelter matte by prolonged milling, Hydrometallurgy, Vol. 171, 2017

F. Moosakazemi, M.R. Tavakoli Mohammadi, M. Mohseni, M. Karamoozian, M. Zakeri, Effect of design and operational parameters on particle morphology in ball mills, International Journal of Mineral Processing, Vol. 165, 2017

M. Menéndez, M. Gent, S. Torno, N. Crespo, A Bond Work index mill ball charge and closing screen product size distributions for grinding crystalline grains, International Journal of Mineral Processing, Vol. 165, 2017

A.J. Buttress, J. Katrib, D.A. Jones, A.R. Batchelor, D.A. Craig, T.A. Royal, C. Dodds, S.W. Kingman, Towards large scale microwave treatment of ores: Part 1 – Basis of design, construction and commissioning, Minerals Engineering, Vol. 109, 2017

D. Boemer, J.-P. Ponthot, A generic wear prediction procedure based on the discrete element method for ball mill liners in the cement industry, Minerals Engineering, Vol. 109, 2017

W. Jacob, D.R. Cooper, T. Gutowski, J. Ramos-Grez, The efficiency of copper ore comminution: A thermodynamic exergy analysis, Minerals Engineering, Vol. 109, 2017

A. Mwanga, J. Rosenkranz, P. Lamberg, Development and experimental validation of the Geometallurgical Comminution Test (GCT), Minerals Engineering, Vol. 108, 2017

M.D. Sinnott, P.W. Cleary, R.D. Morrison, Combined DEM and SPH simulation of overflow ball mill discharge and trommel flow, Minerals Engineering, Vol. 108, 2017

S. Palaniandy, M. Yahyaei, M. Powell, Assessment of hydrocyclone operation in gravity induced stirred mill circuits, Minerals Engineering, Vol. 108, 2017

B. Bonfils, Quantifying of impact breakage of cylindrical rock particles on an impact load cell, International Journal of Mineral Processing, Vol. 161, 2017

F.K. Mulenga, Sensitivity analysis of Austin's scale-up model for tumbling ball mills — Part 1. Effects of batch grinding parameters, Powder Technology, Vol. 311, 2017

T.C. Alex, R. Kumar, Surface and bulk activation of a siliceous bauxite during attrition milling, International Journal of Mineral Processing, Vol. 160, 2017

M. Johansson, M. Bengtsson, M. Evertsson, E. Hulthén, A fundamental model of an industrial-scale jaw crusher, Minerals Engineering, Vol. 105, 2017

X. Bian, G. Wang, H. Wang, S. Wang, W. Lv, Effect of lifters and mill speed on particle behaviour, torque, and power consumption of a tumbling ball mill: Experimental study and DEM simulation, Minerals Engineering, Vol. 105, 2017

D.B. Mazzinghy, J. Lichter, C.L. Schneider, R. Galéry, J.F.C. Russo, Vertical stirred mill scale-up and simulation: Model validation by industrial samplings results, Minerals Engineering, Vol. 103-104, 2017

P.P. Rosario, Technical and economic assessment of a non-conventional HPGR circuit, Minerals Engineering, Vol. 103-104, 2017

M. Hesse, O. Popov, H. Lieberwirth, Increasing efficiency by selective comminution, Minerals Engineering, Vol. 103-104, 2017

M. Johansson, J. Quist, M. Evertsson, E. Hulthén, Cone crusher performance evaluation using DEM simulations and laboratory experiments for model validation, Minerals Engineering, Vol. 103-104, 2017

H. Lieberwirth, P. Hillmann, M. Hesse, Dynamics in double roll crushers, Minerals Engineering, Vol. 103-104, 2017

D. Altun, H. Benzer, N. Aydogan, C. Gerold, Operational parameters affecting the vertical roller mill performance, Minerals Engineering, Vol. 103-104, 2017

S. Nkwanyana, B. Loveday, Addition of pebbles to a ball-mill to improve grinding efficiency, Minerals Engineering, Vol. 103-104, 2017

M. Toifl, P. Hartlieb, R. Meisels, T. Antretter, F. Kuchar, Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite, Minerals Engineering, Vol. 103-104, 2017

S. Breitung-Faes, Estimation of product relating energy of wet operated stirred media mills in terms of process transfer to other mill geometries and sizes, Minerals Engineering, Vol. 103-104, 2017

A. Sabih, P. Radziszewski, I. Mullany, Investigating grinding media differences in microstructure, hardness, abrasion and fracture toughness, Minerals Engineering, Vol. 103-104, 2017

P. Radziszewski, A. Moore, Understanding the effect of pressure profile on stirred mill impeller wear, Minerals Engineering, Vol. 103-104, 2017

A. Heath, V. Keikkala, A. Paz, H. Lehto, A power model for fine grinding HIGmills with castellated rotors, Minerals Engineering, Vol. 103-104, 2017

M. Bengtsson, G. Asbjörnsson, E. Hulthén, M. Evertsson, Towards dynamical profit optimization of comminution circuits, Minerals Engineering, Vol. 103-104, 2017

G.B. Tupper, I. Govender, A.N. Mainza, Predicting flows from the Dynamic Ergun Equation, Minerals Engineering, Vol. 103-104, 2017

C. Carrasco, L. Keeney, T.J. Napier-Munn, P. Bode, Unlocking additional value by optimising comminution strategies to process Grade Engineering® streams, Minerals Engineering, Vol. 103-104, 2017

R. Cepuritis, E.J. Garboczi, S. Jacobsen, Three dimensional shape analysis of concrete aggregate fines produced by VSI crushing, Powder Technology, Vol. 308, 2017

G. Ma, W. Zhou, R.A. Regueiro, Q. Wang, X. Chang, Modeling the fragmentation of rock grains using computed tomography and combined FDEM, Powder Technology, Vol. 308, 2017

J. Faitli, K. Bohács, G. Mucsi, Online rheological monitoring of stirred media milling, Powder Technology, Vol. 308, 2017

D. Ciceri, M. de Oliveira, R.M. Stokes, T. Skorina, A. Allanore, Characterization of potassium agrominerals: Correlations between petrographic features, comminution and leaching of ultrapotassic syenites, Minerals Engineering, Vol. 102, 2017

S. Touzé, K. Bru, Y. Ménard, A. Weh, F. Von der Weid, Electrical fragmentation applied to the recycling of concrete waste – Effect on aggregate liberation, International Journal of Mineral Processing, Vol. 158, 2017

S. Palaniandy, Extending the application of JKFBC for gravity induced stirred mills feed ore characterisation, Minerals Engineering, Vol. 101, 2017

V.K. Gupta, Effect of size distribution of the particulate material on the specific breakage rate of particles in dry ball milling, Powder Technology, Vol. 305, 2017

A. Strobel, S. Romeis, S. Wittpahl, P. Herre, J. Schmidt, W. Peukert, Characterization of stressing conditions in mills – A comprehensive research strategy based on well-characterized model particles, Powder Technology, Vol. 305, 2017

R. Zhao, Y. Han, M. He, Y. Li, Grinding kinetics of quartz and chlorite in wet ball milling, Powder Technology, Vol. 305, 2017

F. Saeidi, M. Yahyaei, M. Powell, L.M. Tavares, Investigating the effect of applied strain rate in a single breakage event, Minerals Engineering, Vol. 100, 2017

P.W. Cleary, M.D. Sinnott, R.D. Morrison, S. Cummins, G.W. Delaney, Analysis of cone crusher performance with changes in material properties and operating conditions using DEM, Minerals Engineering, Vol. 100, 2017