Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

U. Ulusoy, M. Yekeler, Dynamic image analysis of calcite particles created by different mills, International Journal of Mineral Processing, Vol. 133, 2014

W. Zuo, F. Shi, E. Manlapig, Electrical breakdown channel locality in high voltage pulse breakage, Minerals Engineering, Vol. 69, 2014

O. Altun, H. Benzer, U. Enderle, The effects of chamber diameter and stirrer design on dry horizontal stirred mill performance, Minerals Engineering, Vol. 69, 2014

I.E. Rivera Madrid, B.eatriz Álvarez Rodríguez, O. Bustamante, O.J. Restrepo Baena, J.M. Menéndez-Aguado, Ceramic ball wear prediction in tumbling mills as a grinding media selection tool, Powder Technology, Vol. 268, 2014

A. Fistes, D. Rakic, A. Takaci, M. Brdar, Solution of the breakage matrix reverse problem, Powder Technology, Vol. 268, 2014

N. Virivinti, K. Mitra, Fuzzy Expected Value Analysis of an Industrial Grinding Process, Powder Technology, Vol. 268, 2014

X. Chen, Y. Peng, D. Bradshaw, The effect of particle breakage mechanisms during regrinding on the subsequent cleaner flotation, Minerals Engineering, Vol. 66-68, 2014

X. Chen, D. Seaman, Y. Peng, D. Bradshaw, Importance of oxidation during regrinding of rougher flotation concentrates with a high content of sulfides, Minerals Engineering, Vol. 66-68, 2014

M. Capece, E. Bilgili, R. Davé, Insight into first-order breakage kinetics using a particle-scale breakage rate constant, Chemical Engineering Science, Vol. 117, 2014

S. Nadolski, B. Klein, A. Kumar, Z. Davaanyam, An energy benchmarking model for mineral comminution, Minerals Engineering, Vol. 65, 2014

L. Ribas, G.C. Cordeiro, R.D. Toledo Filho, L.M. Tavares, Measuring the strength of irregularly-shaped fine particles in a microcompression tester, Minerals Engineering, Vol. 65, 2014

G.R. Ballantyne, M.S. Powell, Benchmarking comminution energy consumption for the processing of copper and gold ores, Minerals Engineering, Vol. 65, 2014

A.K. Pani, H.K. Mohanta, Soft sensing of particle size in a grinding process: Application of support vector regression, fuzzy inference and adaptive neuro fuzzy inference techniques for online monitoring of cement fineness, Powder Technology, Vol. 264, 2014

N. Djordjevic, Recovery of copper sulphides mineral grains at coarse rock fragments size, Minerals Engineering, Vol. 64, 2014

J. Salazar, H. Valdés-González, E. Vyhmesiter, F. Cubillos, Model predictive control of semiautogenous mills (sag), Minerals Engineering, Vol. 64, 2014

W. Hu, H. Wang, X. Liu, C. Sun, Effect of nonmetallic additives on iron grain grindability, International Journal of Mineral Processing, Vol. 130, 2014

Y. Wang, N. Djordjevic, Thermal stress FEM analysis of rock with microwave energy, International Journal of Mineral Processing, Vol. 130, 2014

N.S. Weerasekara, M.S. Powell, Performance characterisation of AG/SAG mill pulp lifters using CFD techniques, Minerals Engineering, Vol. 63, 2014

N. Chimwani, F.K. Mulenga, D. Hildebrandt, D. Glasser, M.M. Bwalya, Scale-up of batch grinding data for simulation of industrial milling of platinum group minerals ore, Minerals Engineering, Vol. 63, 2014

P. Jonsén, B.I. Pĺlsson, J.F. Stener, H. Häggblad, A novel method for modelling of interactions between pulp, charge and mill structure in tumbling mills, Minerals Engineering, Vol. 63, 2014

Y.D. Zhou, Y.L. Liu, X.W. Tang, S.Q. Cao, C.J. Chi, Numerical investigation into the fragmentation efficiency of one coal prism in a roller pulveriser: Homogeneous approach, Minerals Engineering, Vol. 63, 2014

S. Mohammadnejad, J.L. Provis, J.S.J. van Deventer, Effects of grinding on the preg-robbing behaviour of pyrophyllite, Hydrometallurgy, Vol. 146, 2014

M. (Shi Ping) Wu, V. (Zhen Lian) Wang, Modeling ball impact on the wet mill liners and its application in predicting mill magnetic liner performance, Minerals Engineering, Vol. 61, 2014

F.Kh. Urakaev, Resonance and it application to a vibratory mill, Minerals Engineering, Vol. 61, 2014

A. Gutierrez, J. Guichou, Computational simulation of fracture of materials in comminution devices, Minerals Engineering, Vol. 61, 2014

K.P. Simba, M.H. Moys, Effects of mixtures of grinding media of different shapes on milling kinetics, Minerals Engineering, Vol. 61, 2014

S. Mohammadnejad, J.L. Provis, J.S.J. van Deventer, The effect of grinding mechanism on the preg-robbing of gold onto quartz, International Journal of Mineral Processing, Vol. 128, 2014

Ö. Genç, A.H. Benzer, .L. Ergün, Analysis of single particle impact breakage characteristics of raw and HPGR-crushed cement clinkers by drop weight testing, Powder Technology, Vol. 259, 2014

T. Brosh, H. Kalman, A. Levy, I. Peyron, F. Ricard, DEM–CFD simulation of particle comminution in jet-mill, Powder Technology, Vol. 257, 2014

M.M. Bwalya, M.H. Moys, G.J. Finnie, F.K. Mulenga, Exploring ball size distribution in coal grinding mills, Powder Technology, Vol. 257, 2014

J. Kwon, H. Cho, D. Lee, R. Kim, , Investigation of breakage characteristics of low rank coals in a laboratory swing hammer mill, Powder Technology, Vol. 256, 2014

F.K. Mulenga, M.H. Moys, Effects of slurry pool volume on milling efficiency, Powder Technology, Vol. 256, 2014

S. Ouattara, C. France, Grinding of calcite suspensions in a stirred media mill: Effect of operational parameters on the product quality and the specific energy, Powder Technology, Vol. 255, 2014

H. Wei, Y. He, S. Wang, W. Xie, W. Zuo, F. Shi, Effects of circulating load and grinding feed on the grinding kinetics of cement clinker in an industrial CKP mill, Powder Technology, Vol. 253, 2014

Sang Ho Cho, M. Yokota, M. Ito, Satoru Kawasaki, Soo Bok Jeong, Byoung Kon Kim, K. Kaneko, Electrical disintegration and micro-focus X-ray CT observations of cement paste samples with dispersed mineral particles, Minerals Engineering, Vol. 57, 2014

F.N. de Magalhăes, L.M. Tavares, Rapid ore breakage parameter estimation from a laboratory crushing test, International Journal of Mineral Processing, Vol. 126, 2014

P.L. Guzzo, J.B. Santos, R.C. David, Particle size distribution and structural changes in limestone ground in planetary ball mill, International Journal of Mineral Processing, Vol. 126, 2014

K. Tourkey Atta, A. Johansson, T. Gustafsson, Control oriented modeling of flow and size distribution in cone crushers, Minerals Engineering, Vol. 56, 2014

J.A. Curry, M.J.L. Ismay, G.J. Jameson, Mine operating costs and the potential impacts of energy and grinding, Minerals Engineering, Vol. 56, 2014

F.K. Mulenga, M.H. Moys, Effects of slurry filling and mill speed on the net power draw of a tumbling ball mill, Minerals Engineering, Vol. 56, 2014

C. Aldrich, J.J. Burchell, J.W. de V. Groenewald, C. Yzelle, Visualization of the controller states of an autogenous mill from time series data, Minerals Engineering, Vol. 56, 2014

A.R. Sayadi, M.R. Khalesi, M.K. Borji, A parametric cost model for mineral grinding mills, Minerals Engineering, Vol. 55, 2014

P. Amelunxen, P. Berrios, E. Rodriguez, The SAG grindability index test, Minerals Engineering, Vol. 55, 2014