Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010: 2009 : 2008 : 2007: 2006: 2005: 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Starkey, J., and Meadows, D., Comparison of ore hardness measurements for grinding mill design for the Tenke project, CIM Magazine, Vol.3 No.7, 2008

Bartsch, E., et al, Evolution of SAG mill process control at the Xstrata Nickel Raglan operation, CIM Magazine, Vol.3 No.7, 2008

Huang, G.Z., and Grano, S., Electrochemical interaction of bornite with grinding media and its effect on flotation, Mineral Processing and Extractive Metallurgy (Trans, IMM C), Vol.117 No.4, 2008

G.D. Gonzalez, D. Miranda, A. Casali, G. Vallebuona, Detection and identification of ore grindability in a semiautogenous grinding circuit model using wavelet transform variances of measured variables, International Journal of Mineral Processing, Vol.89 No.1-4, 2008

On, L.M., et al, Comminution property of bauxite and selective separation of Al and Si in bauxite, Mineral Processing and Extractive Metallurgy (Trans. IMM Sec. C), Vol.117 No.3, 2008

N. Khumalo, D. Glasser, D. Hildebrandt, B. Hausberger, Improving comminution efficiency using classification: An attainable region approach, Powder Technology, Vol. 187, No. 3, 2008

Harder, J., Trends in the grinding of hard rock for raw materials extraction, AT Aufbereitungs Technik, No.4, 2008

Bergbau, U.M., Full mobile crawler-mounted crushing plant for large open-pit mines, AT Aufbereitungs Technik, No.4, 2008

Unland, G., and Schmidt, M., Determination of the comminution forces of sizers, AT Aufbereitungs Technik, No.4, 2008

F. Dellisanti, G. Valdre, Linear relationship between thermo-dehydroxylation and induced-strain by mechanical processing in vacuum: The case of industrial kaolinite, talc and montmorillonite, International Journal of Mineral Processing, Vol.88 No.3-4, 2008

P. Balaz, E. Turianicova, M. Fabian, R.A. Kleiv, J. Briancin, A. Obut, Structural changes in olivine (Mg,Fe)₂SiO₄ mechanically activated in high-energy mills, International Journal of Mineral Processing, Vol.88 No.1-2, 2008

M. Bengtsson, C.M. Evertsson, Modelling of output and power consumption in vertical shaft impact crushers, International Journal of Mineral Processing, Vol.88 No.1-2, 2008

J. Herbst, A. Potapov, G. Hambidge, J. Rademan, Modeling of diamond liberation and damage for Debswana kimberlitic ores, Minerals Engineering, Vol. 21, No. 11, 2008

M.S. Powell, I. Govender, A.T. McBride, Applying DEM outputs to the unified comminution model, Minerals Engineering, Vol. 21, No. 11, 2008

M. Khanal, R. Morrison, Discrete element method study of abrasion, Minerals Engineering, Vol. 21, No. 11, 2008

Hoon Lee, Ji Hoe Kwon, Kwan Ho Kim, Hee Chan Cho, Application of DEM model to breakage and liberation behaviour of recycled aggregates from impact-breakage of concrete waste, Minerals Engineering, Vol. 21, No. 11, 2008

R.D. Morrison, P.W. Cleary, Towards a virtual comminution machine, Minerals Engineering, Vol. 21, No. 11, 2008

S. Martins, W. Li, P. Radziszewski, S. Caron, M. Aguanno, M. Bakhos, E.L. Petch, Validating the instrumented ball outputs with simple trajectories, Minerals Engineering, Vol. 21, No. 11, 2008

Zhi-gang Su, Pei-hong Wang, Xiang-jun Yu, Zhen-zhong Lv, Experimental investigation of vibration signal of an industrial tubular ball mill: Monitoring and diagnosing, Minerals Engineering, Vol. 21, No. 10, 2008

M. Lindqvist, Energy considerations in compressive and impact crushing of rock, Minerals Engineering, Vol. 21, No. 9, 2008

Mangesana, N., et al, The effect of particle sizes and solids concentration on the rheology of silica sand based suspensions, Journal of the South African Institute of Mining and Metallurgy, Vol.108, No.4, 2008

Xi-song Chen, Qi Li, Shu-min Fei, Constrained model predictive control in ball mill grinding process, Powder Technology, Vol. 186, No. 1, 2008

P. Pourghahramani, E. Altin, M. Rao Mallembakam, W. Peukert, E. Forssberg, Microstructural characterization of hematite during wet and dry millings using Rietveld and XRD line profile analyses, Powder Technology, Vol. 186, No. 1, 2008

D. Tromans, Mineral comminution: Energy efficiency considerations, Minerals Engineering, Vol.21 No.8, 2008

D. Touil, S. Belaadi, C. Frances, The specific selection function effect on clinker grinding efficiency in a dry batch ball mill, International Journal of Mineral Processing, Vol.87 No.3-4, 2008

P. Pourghahramani, B. Palson, E. Forssberg, Multivariate projection and analysis of microstructural characteristics of mechanically activated hematite in different grinding mills, International Journal of Mineral Processing, Vol.87 No.3-4, 2008

L.M. Tavares, P.B. das Neves, Microstructure of quarry rocks and relationships to particle breakage and crushing, International Journal of Mineral Processing, Vol.87 No.1-2, 2008

S. Palaniandy, K.A.M. Azizli, H. Hussin and S.F.S. Hashim, Effect of operational parameters on the breakage mechanism of silica in a jet mill, Minerals Engineering, Vol. 21, No. 5, 2008

M. Khanal, W. Schubert and J. Tomas, Compression and impact loading experiments of high strength spherical composites, International Journal of Mineral Processing, Vol.86 No.1-4, 2008

J.T. Kalala, M. Breetzke and M.H. Moys, Study of the influence of liner wear on the load behaviour of an industrial dry tumbling mill using the Discrete Element Method (DEM), International Journal of Mineral Processing, Vol.86 No.1-4, 2008

Bilodeau, M., et al, Impact of electronic blasting detonators on downstream operations in a quarry. Minerals & Metallurgical Processing, Vol.25, No.1, 2008

A.L. Coello Velazquez, J.M. Menendez-Aguado and R. Laborde Brown, Grindability of lateritic nickel ores in Cuba, Powder Technology, Vol. 182, No. 1, 2008

E. Th. Stamboliadis, The evolution of a mineral liberation model by the repetition of a simple random breakage pattern, Minerals Engineering, Vol. 21, No. 3, 2008

S. Morrell, A method for predicting the specific energy requirement of comminution circuits and assessing their energy utilisation efficiency, Minerals Engineering, Vol. 21, No. 3, 2008

G. Scott, S.M. Bradshaw and J.J. Eksteen, The effect of microwave pretreatment on the liberation of a copper carbonatite ore after milling, International Journal of Mineral Processing, Vol.85 No.4, 2008

M. Founti, G. Zannis and P. Makris, Power aspects of a horizontal ring mill pulverizer under continuous comminution of olivine, International Journal of Mineral Processing, Vol.85 No.4, 2008

V.A. Golovanevskiy and R.A. Bearman, Gouging abrasion test for rock abrasiveness testing, International Journal of Mineral Processing, Vol.85 No.4, 2008

G. Ozbayoglu, A.M. Ozbayoglu and M.E. Ozbayoglu, Estimation of Hardgrove grindability index of Turkish coals by neural networks, International Journal of Mineral Processing, Vol.85 No.4, 2008

C.T. Jayasundara, R.Y. Yang, A.B. Yu and D. Curry, Discrete particle simulation of particle flow in IsaMill--Effect of grinding medium properties, Chemical Engineering Journal, Vol. 135, No. 1-2, 2008

S. Masiuk and R. Rakoczy, Kinetic equation of grinding process in mixing of granular material using probability density functions, transient operators and informational entropy, Chemical Engineering and Processing: Process Intensification, Vol. 47, No. 2, 2008