Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011: 2010: 2009 : 2008: 2007: 2006: 2005: 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Wolmarans, E., and Morgan, P., Milling circuit selection for the Nkomati 375 ktpm concentrator, Journal of the Southern African IMM, Vol. 109, No. 11, 2009

van Ommen, R, and Flachberger, H., Selected examples of the influence of cyclone underflow density to a closed circuit grinding system, AT Mineral Processing, No.11, 2009

Refahi, A., et al, Comparison between Bond crushing energy and fracture energy of rocks in a jaw crusher using numerical simulation, Journal of the Southern African IMM, Vol. 109, No. 12, 2009

P. Oghazi, B. Palsson, K. Tano, Applying traceability to grinding circuits by using Particle Texture Analysis (PTA), Minerals Engineering, Vol. 22, No. 7-8, 2009

F. Shi, R. Morrison, A. Cervellin, F. Burns, F. Musa, Comparison of energy efficiency between ball mills and stirred mills in coarse grinding, Minerals Engineering, Vol. 22, No. 7-8, 2009

P. Balaz, E. Dutkova, Fine milling in applied mechanochemistry, Minerals Engineering, Vol. 22, No. 7-8, 2009

S. Palaniandy, N. Abd Kadir, M. Jaafar, Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries, Minerals Engineering, Vol. 22, No. 7-8, 2009

B.Y. Farber, L. Knopjes, N. Bedesi, Advances in ceramic media for high energy milling applications, Minerals Engineering, Vol. 22, No. 7-8, 2009

F. Shi, T. Kojovic, S. Larbi-Bram, E. Manlapig, Development of a rapid particle breakage characterisation device - The JKRBT, Minerals Engineering, Vol. 22, No. 7-8, 2009

J. Lichter, K. Lim, A. Potapov, D. Kaja, New developments in cone crusher performance optimization, Minerals Engineering, Vol. 22, No. 7-8, 2009

M. Bengtsson, P. Svedensten, C.M. Evertsson, Improving yield and shape in a crushing plant, Minerals Engineering, Vol. 22, No. 7-8, 2009

M.S. Powell, A.P. van der Westhuizen, A.N. Mainza, Applying grindcurves to mill operation and optimisation, Minerals Engineering, Vol. 22, No. 7-8, 2009

S.P. Michaux, Sub-populations and patterns in blast induced fine fragmentation, Minerals Engineering, Vol. 22, No. 7-8, 2009

E. Stamboliadis, O. Pantelaki, E. Petrakis, Surface area production during grinding, Minerals Engineering, Vol. 22, No. 7-8, 2009

F. Musa, R. Morrison, A more sustainable approach to assessing comminution efficiency, Minerals Engineering, Vol. 22, No. 7-8, 2009

G. Si, H. Cao, Y. Zhang, L. Jia, Experimental investigation of load behaviour of an industrial scale tumbling mill using noise and vibration signature techniques, Minerals Engineering, Vol. 22, No. 15, 2009

F.M. Katubilwa, M.H. Moys, Effect of ball size distribution on milling rate, Minerals Engineering, Vol. 22, No. 15, 2009

O. Genc, A.H. Benzer, Horizontal roller mill (Horomill) application versus hybrid HPGR/ball milling in finish grinding of cement, Minerals Engineering, Vol. 22, No. 15, 2009

Kishalay Mitra, Multiobjective optimization of an industrial grinding operation under uncertainty, Chemical Engineering Science, Vol. 64, No. 23, 2009

M.Sh. Bafghi, A.H. Emami, J. Vahdati Khaki, A. Zakeri, Development of a mathematical expression for the variation of amorphization phenomenon during intensive milling of minerals, International Journal of Mineral Processing, Vol. 93, No. 2, 2009

D. Gang, H. Dongming, F. Xiumin, Cone crusher chamber optimization using multiple constraints, International Journal of Mineral Processing, Vol. 93, No. 2, 2009

P. Huang, Min-ping Jia, Bing-lin Zhong, Investigation on measuring the fill level of an industrial ball mill based on the vibration characteristics of the mill shell, Minerals Engineering, Vol. 22, No. 14, 2009

O. Genc, A.H. Benzer, Single particle impact breakage characteristics of clinkers related to mineral composition and grindability, Minerals Engineering, Vol. 22, No. 13, 2009

M. Torres, A. Casali, A novel approach for the modelling of high-pressure grinding rolls, Minerals Engineering, Vol. 22, No. 13, 2009

Kuhn, C., and Schicht, E., All-purpose crushing, AT Mineral Processing, No.3, 2009

A.-Z.M. Abouzeid, D.W. Fuerstenau, Grinding of mineral mixtures in high-pressure grinding rolls, International Journal of Mineral Processing, Vol. 93, No. 1, 2009

D. Gang, F. Xiumin, H. Dongming, Analysis and optimization of cone crusher performance, Minerals Engineering, Vol. 22, No. 12, 2009

O.M. Alruiz, S. Morrell, C.J. Suazo, A. Naranjo, A novel approach to the geometallurgical modelling of the Collahuasi grinding circuit, Minerals Engineering, Vol. 22, No. 12, 2009

T.A. Apelt, N.F. Thornhill, Inferential measurement of SAG mill parameters IV: Inferential model validation, Minerals Engineering, Vol. 22, No. 12, 2009

T.A. Apelt, N.F. Thornhill, Inferential measurement of SAG mill parameters V: MPC simulation, Minerals Engineering, Vol. 22, No. 12, 2009

S.L.A. Hennart, W.J. Wildeboer, P. van Hee, G.M.H. Meesters, Identification of the grinding mechanisms and their origin in a stirred ball mill using population balances, Chemical Engineering Science, Vol. 64, No. 19, 2009

C.T. Jayasundara, R.Y. Yang, B.Y. Guo, A.B. Yu, J. Rubenstein, Effect of slurry properties on particle motion in IsaMills, Minerals Engineering, Vol. 22, No. 11, 2009

M.J. Metzger, D. Glasser, B. Hausberger, D. Hildebrandt, B.J. Glasser, Use of the attainable region analysis to optimize particle breakage in a ball mill, Chemical Engineering Science, Vol. 64, No. 17, 2009

Oberholzer, V., and van der Walt, J., Investigation of factors influencing the attrition breakage of coal, Journal of the Southern African IMM, Vol. 109, No. 4, 2009

P.W. Cleary, Ball motion, axial segregation and power consumption in a full scale two chamber cement mill, Minerals Engineering, Vol. 22, No. 9-10, 2009

C. Knieke, M. Sommer, W. Peukert, Identifying the apparent and true grinding limit, Powder Technology, Vol. 195, No. 1, 2009

S. Teng, P. Wang, L. Zhu, M.-W. Young, C.G. Gogos, Experimental and numerical analysis of a lab-scale fluid energy mill, Powder Technology, Vol. 195, No. 1, 2009

S. Fadda, A. Cincotti, A. Concas, M. Pisu, G. Cao, Modelling breakage and reagglomeration during fine dry grinding in ball milling devices, Powder Technology, Vol. 194, No. 3, 2009

X.S. Chen, J. Yang, S.H. Li, Q. Li, Disturbance observer based multi-variable control of ball mill grinding circuits, Journal of Process Control, Vol. 19, No. 7, 2009

M. Meier, E. John, D. Wieckhusen, W. Wirth, W. Peukert, Generally applicable breakage functions derived from single particle comminution data, Powder Technology, Vol. 194, No. 1-2, 2009

A. Seyfi Erdem, S. Levent Ergun, The effect of ball size on breakage rate parameter in a pilot scale ball mill, Minerals Engineering, Vol. 22, No. 7-8, 2009

R.D. Morrison, P.W. Cleary, M.D. Sinnott, Using DEM to compare the energy efficiency of pilot scale ball and tower mills, Minerals Engineering, Vol. 22, No. 7-8, 2009

A. Farzanegan, S.M. Vahidipour, Optimization of comminution circuit simulations based on genetic algorithms search method, Minerals Engineering, Vol. 22, No. 7-8, 2009

A.L. Hinde, J.T. Kalala, The application of a simplified approach to modelling tumbling mills, stirred media mills and HPGR's, Minerals Engineering, Vol. 22, No. 7-8, 2009

C.L. Schneider, V.K. Alves, L.G. Austin, Modeling the contribution of specific grinding pressure for the calculation of HPGR product size distribution, Minerals Engineering, Vol. 22, No. 7-8, 2009

Luis Marcelo Tavares, R.M. de Carvalho, Modeling breakage rates of coarse particles in ball mills, Minerals Engineering, Vol. 22, No. 7-8, 2009

S. Palaniandy, K.A.M. Azizli, Mechanochemical effects on talc during fine grinding process in a jet mill, International Journal of Mineral Processing, Vol. 92, No. 1-2, 2009

M. Ito, S. Owada, T. Nishimura, T. Ota, Experimental study of coal liberation: Electrical disintegration versus roll-crusher comminution, International Journal of Mineral Processing, Vol. 92, No. 1-2, 2009

Farit Kh. Urakaev, Mineral processing by the abrasive-reactive wear, International Journal of Mineral Processing, Vol. 92, No. 1-2, 2009

C. Hosten, H. Cimilli, The effects of feed size distribution on confined-bed comminution of quartz and calcite in piston-die press, International Journal of Mineral Processing, Vol.91 No.3-4, 2009

M. Yahyaei, S. Banisi, M. Hadizadeh, Modification of SAG mill liner shape based on 3-D liner wear profile measurements, International Journal of Mineral Processing, Vol.91 No.3-4, 2009

A.B. Makokha, M.H. Moys, C. Couvas, A.M. Muumbo, Steady state inferential modeling of temperature and pressure in an air-swept coal pulverizing ball mill, Powder Technology, Vol. 192, No. 3, 2009

G. Matijasic, K. Zizek, U. Sofilic, V. Mandic, H. Skopal, Wet comminution kinetics of dolomite at laboratory scale, Chemical Engineering and Processing: Process Intensification, Vol. 48, No.4, 2009

B. Venkoba Rao, S.J. Gopalakrishna, Hardgrove grindability index prediction using support vector regression, International Journal of Mineral Processing, Vol. 91, No. 1-2, 2009

C. Sasikumar, S. Srikanth, N.K. Mukhopadhyay, S.P. Mehrotra, Energetics of mechanical activation - Application to ilmenite, Minerals Engineering, Vol. 22, No. 6, 2009

S. Morrell, Predicting the overall specific energy requirement of crushing, high pressure grinding roll and tumbling mill circuits, Minerals Engineering, Vol. 22, No. 6, 2009

Greet, C.J., The significance of grinding environment on the flotation of UG2 ores, Journal of the Southern African IMM, Vol. 108, No. 1, 2009

Rule, C.M., et al, HPGR- revolution in platinum?, Journal of the Southern African IMM, Vol. 108, No. 1, 2009

R.A. Kleiv, A simple heatsink for planetary mills, Minerals Engineering, Vol. 22, No. 5, 2009

J. Temuujin, K.J.D. MacKenzie, G. Burmaa, D. Tsend-Ayush, Ts. Jadambaa, A. van Riessen, Mechanical activation of MoS₂ + Na₂O₂ mixtures, Minerals Engineering, Vol. 22, No. 4, 2009

S. Grano, The critical importance of the grinding environment on fine particle recovery in flotation, Minerals Engineering, Vol. 22, No. 4, 2009

R. Junga, S. Mateuszuk, J. Pospolita, Investigations into the movement of milled medium in the bowl of a ring-roller mill, Powder Technology, Vol. 191, No. 1-2, 2009

E. Hulthen, C.M. Evertsson, Algorithm for dynamic cone crusher control, Minerals Engineering, Vol. 22, No. 3, 2009

D. Garcia, C.L. Lin, J.D. Miller, Quantitative analysis of grain boundary fracture in the breakage of single multiphase particles using X-ray microtomography procedures, Minerals Engineering, Vol. 22, No. 3, 2009

G. Unland, Y. Al-Khasawneh, The influence of particle shape on parameters of impact crushing, Minerals Engineering, Vol. 22, No. 3, 2009

S.K. Soni, S.C. Shukla, G. Kundu, Modeling of particle breakage in a smooth double roll crusher, International Journal of Mineral Processing, Vol. 90, No. 1-4, 2009

A. Ozkan, M. Yekeler, M. Calkaya, Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding, International Journal of Mineral Processing, Vol. 90, No. 1-4, 2009

D. Wei, I.K. Craig, Grinding mill circuits -- A survey of control and economic concerns, International Journal of Mineral Processing, Vol. 90, No. 1-4, 2009

P.C. Pistorius, H. Kotze, Role of silicate phases during comminution of titania slag, Minerals Engineering, Vol. 22, No. 2, 2009

A. Tasdemir, Fractal evaluation of particle size distributions of chromites in different comminution environments, Minerals Engineering, Vol. 22, No. 2, 2009

L. McElroy, J. Bao, R.Y. Yang, A.B. Yu, A soft-sensor approach to flow regime detection for milling processes, Powder Technology, Vol. 188, No. 3, 2009