Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010: 2009 : 2008 : 2007: 2006 : 2005: 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

J.M.M. Aguado, A.L.C. Velázquez, O.N. Tijonov and M.A.R. Díaz, Implementation of energy sustainability concepts during the comminution process of the Punta Gorda nickel ore plant (Cuba), Powder Technology, Vol.170 No.3, 2006

J.A. Gantt, I.T. Cameron, J.D. Litster and E.P. Gatzke, Determination of coalescence kernels for high-shear granulation using DEM simulations, Powder Technology, Vol.170 No.2, 2006

M. Irannajad, A. Farzanegan and S.M. Razavian, Spreadsheet-based simulation of closed ball milling circuits, Minerals Engineering, Vol.19 No.15, 2006

N. Djordjevic, R. Morrison, B. Loveday and P. Cleary, Modelling comminution patterns within a pilot scale AG/SAG mill, Minerals Engineering, Vol.19 No.15, 2006

P.W. Cleary, M. Sinnott and R. Morrison, Prediction of slurry transport in SAG mills using SPH fluid flow in a dynamic DEM based porous media, Minerals Engineering, Vol.19 No.15, 2006

M. Sinnott, P.W. Cleary and R. Morrison, Analysis of stirred mill performance using DEM simulation: Part 1- Media motion, energy consumption and collisional environment, Minerals Engineering, Vol.19 No.15, 2006

P.W. Cleary, M. Sinnott and R. Morrison, Analysis of stirred mill performance using DEM simulation: Part 2 - Coherent flow structures, liner stress and wear, mixing and transport, Minerals Engineering, Vol.19 No.15, 2006

M. Bengtsson and C.M. Evertsson, Measuring characteristics of aggregate material from vertical shaft impact crushers, Minerals Engineering, Vol.19 No.15, 2006

M. Powell and A. Mainza, Extended grinding curves are essential to the comparison of milling performance, Minerals Engineering, Vol.19 No.15, 2006

A. Jankovic and S. Sinclair, The shape of product size distributions in stirred mills, Minerals Engineering, Vol.19 No.15, 2006

B.V. Rao and A. Datta, Analysis of nonlinear batch grinding in stirred media mills using self-similarity solution, Powder Technology, Vol.169 No.1, 2006

D.N. Whittles, S. Kingman, I. Lowndes and K. Jackson, Laboratory and numerical investigation into the characteristics of rock fragmentation, Minerals Engineering, Vol.19 No.14, 2006

A.B. Makokha and M.H. Moys, Towards optimising ball-milling capacity: Effect of lifter design, Minerals Engineering, Vol.19 No.14, 2006

L. Cui, L. An and W. Gong, Effects of process parameters on the comminution capability of high pressure water jet mill, International Journal of Mineral Processing, Vol.81 No.2, 2006

M.A.P. dos Santos and C.A. Costa, Comminution of silicon carbide powder in a planetary mill, Powder Technology, Vol.169 No.2, 2006

M. Lindqvist, M. Evertsson, T. Chenje and P. Radziszewski, Influence of particle size on wear rate in compressive crushing, Minerals Engineering, Vol.19 No.13, 2006

K.K. Kiangi and M.H. Moys, Measurement of the load behaviour in a dry pilot mill using an inductive proximity probe, Minerals Engineering, Vol.19 No.13, 2006

N.S. Lameck, K.K. Kiangi and M.H. Moys, Effects of grinding media shapes on load behaviour and mill power in a dry ball mill, Minerals Engineering, Vol.19 No.13, 2006

N.S. Lameck and M.H. Moys, Effects of media shape on milling kinetics, Minerals Engineering, Vol.19 No.13, 2006

Y. Wang and E. Forssberg, Production of carbonate and silica nano-particles in stirred bead milling, International Journal of Mineral Processing, Vol.81 No.1, 2006

Banisi, S., and Farzaneh, M., Effect of ball size on the performance of grinding and flotation circuits: the Sarcheshmeh copper mine case, Minerals Processing and Extractive Metallurgy (Trans. IMM C) , Vol.115 No.3, 2006

V. Alopaeus, M. Laakkonen and J. Aittamaa, Solution of population balances with breakage and agglomeration by high-order moment-conserving method of classes, Chemical Engineering Science, Vol.61 No.20, 2006

A. Obut, P. Baláz and I. Girgin, Direct mechanochemical conversion of celestite to SrCO₃, Minerals Engineering, Vol.19 No.11, 2006

J.W. de V. Groenewald, L.P. Coetzer and C. Aldrich, Statistical monitoring of a grinding circuit: An industrial case study, Minerals Engineering, Vol.19 No.11, 2006

R.Y. Yang, C.T. Jayasundara, A.B. Yu and D. Curry, DEM simulation of the flow of grinding media in IsaMill, Minerals Engineering, Vol.19 No.10, 2006

N. Djordjevic and R. Morrison, Exploratory modelling of grinding pressure within a compressed particle bed, Minerals Engineering, Vol.19 No.10, 2006

I. Govender and M.S. Powell, An empirical power model derived from 3D particle tracking experiments, Minerals Engineering, Vol.19 No.10, 2006

M.S. Powell and A.T. McBride, What is required from DEM simulations to model breakage in mills? , Minerals Engineering, Vol.19 No.10, 2006

H. Otwinowski, Energy and population balances in comminution process modelling based on the informational entropy, Powder Technology, Vol.167 No.1, 2006

Stamboliadis, E., A breakage function for batch grinding, Canadian Metallurgical Quarterly, Vol.45 No.3, 2006

E. Seyedi Hosseininia and A.A. Mirghasemi, Numerical simulation of breakage of two-dimensional polygon-shaped particles using discrete element method , Powder Technology, Vol.166 No.2, 2006

Menendez-Aguado, J.M., et al, Process models for simulation of Bond tests, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.2, 2006

Ipek, H., Grinding media shape: Cylpebs versus balls, Minerals Processing and Extractive Metallurgy (Trans. IMM C), , Vol.115 No.2, 2006

G.L. Chen, D. Tao and B.K. Parekh, A laboratory study of high chromium alloy wear in phosphate grinding mill., International Journal of Mineral Processing, Vol.80 No.1, 2006

C.E. Özer, S¸.L. Ergün and A.H. Benzer, Modeling of the classification behavior of the diaphragms used in multi-chamber cement mills., International Journal of Mineral Processing, Vol.80 No.1, 2006

Jeschke, H., et al, Concrete comminution in impact crushers- experiments and simulations, Aufbereitungs Technik, Vol.47 No.5, 2006

Grossmann, L., et al, Empirical study of the compaction of cohesive bulk solids in a roll press, Aufbereitungs Technik, Vol.47 No.5, 2006

Bbosa, L., Powell, M.S., and Cloete, T.J., An investigation of impact breakage of rocks using the split Hopkinson pressure bar, Journal of the South African Institute of Mining and Metallurgy, Vol.106 No.4, 2006

Rosario, P.P., et al, Integration of gyratory crusher liner wear and operational performance for better crusher management, CIM Magazine, Vol.1 No.4, 2006

S. Antonyuk, M. Khanal, J. Tomas, S. Heinrich and L. Mörl, Impact breakage of spherical granules: Experimental study and DEM simulation , Chemical Engineering & Processing, Vol.45 No.10, 2006

S. Latchireddi and S. Morrell, Slurry flow in mills with TCPL - An efficient pulp lifter for AG/SAG mills, International Journal of Mineral Processing, Vol.79 No.3, 2006

R.E. Maxim, A.D. Salman and M.J. Hounslow, Predicting dynamic failure of dense granules from static compression tests, International Journal of Mineral Processing, Vol.79 No.3, 2006

C. Chibwana and M.H. Moys, Radial mixing of particles in a dry batch ball mill, Powder Technology, Vol.163 No.3, 2006

P. Pourghahramani and E. Forssberg, Comparative study of microstructural characteristics and stored energy of mechanically activated hematite in different grinding environments, International Journal of Mineral Processing, Vol.79 No.2, 2006

M. Bengtsson, C.M. Evertsson, An empirical model for predicting flakiness in cone crushing, International Journal of Mineral Processing, Vol.79 No.1, 2006

A. Concas, N. Lai, M. Pisu, G. Cao, Modelling of comminution processes in Spex Mixer/Mill, Chemical Engineering Science, Vol.61 No.11, 2006

H. Cho, H. Lee, Y. Lee, Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill, International Journal of Mineral Processing, Vol.78 No.4, 2006

Orumwense, A.O., Effect of media type on regrinding with stirred mills, Minerals & Metallurgical Processing, Vol.23 No.1, 2006

R.A. Kleiv, M. Thornhill, Mechanical activation of olivine, Minerals Engineering, Vol.19 No.4, 2006

Katsabanis, P.D., et al, Effects of blasting on damage and grindability of impacted rock, CIM Bulletin, Vol.98 No.1091, 2006

N.A. Aydogan, L. Ergun, H. Benzer, High pressure grinding rolls (HPGR) applications in the cement industry, Minerals Engineering, Vol.19 No.2, 2006

P.B. Kis, C. Mihalyko, B.G. Lakatos, Discrete model for analysis and design of grinding mill-classifier systems , Chemical Engineering & Processing, Vol.45 No.5, 2006

G. Huang, S. Grano, Galvanic interaction between grinding media and arsenopyrite and its effect on flotation , International Journal of Mineral Processing, Vol.78 No.3, 2006

G. Huang, S. Grano, W. Skinner, Galvanic interaction between grinding media and arsenopyrite and its effect on flotation: Part II. Effect of grinding on flotation , International Journal of Mineral Processing, Vol.78 No.3, 2006

Z. Ekmekci, D.J. Bradshaw, P.J. Harris, A.M. Buswell, Interactive effects of the type of milling media and copper sulphate addition on the flotation performance of sulphide minerals from Merensky ore Part I: Pulp chemistry , International Journal of Mineral Processing, Vol.78 No.3, 2006

Z. Ekmekci, D.J. Bradshaw, P.J. Harris, A.M. Buswell, Interactive effects of the type of milling media and CuSO₄ addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability , International Journal of Mineral Processing, Vol.78 No.3, 2006

H. Ipek, The effects of grinding media shape on breakage rate, Minerals Engineering, Vol.19 No.1, 2006

M. He, Y. Wang, E. Forssberg, Parameter effects on wet ultrafine grinding of limestone through slurry rheology in a stirred media mill, Powder Technology, Vol.161 No.1, 2006

H. Dong, M.H. Moys, Experimental study of oblique impacts with initial spin, Powder Technology, Vol.161 No.1, 2006

T. Iwasaki, J. Hwan Kim, M. Satoh, Characterization of media mills based on mechanical energy applied to particles, Chemical Engineering Science, Vol.61 No.4, 2006

E. Bilgili, J. Yepes, B. Scarlett, Formulation of a non-linear framework for population balance modeling of batch grinding: Beyond first-order kinetics, Chemical Engineering Science, Vol.61 No.1, 2006

M. Sommer, F. Stenger, W. Peukert, N.J. Wagner, Agglomeration and breakage of nanoparticles in stirred media mills-a comparison of different methods and models, Chemical Engineering Science, Vol.61 No.1, 2006