Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010: 2009 : 2008 : 2007: 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Banisi, S., and Farzaneh, M., Effect of ball size charge on the performance of grinding and flotation circuits. European Journal of Mineral Processing and Environmental Protection, Vol.4 No.3, 2004

Radziszewski, P., and Caron, S., Towards AG/SAG/ball mill on-line performance monitoring. CIM Bulletin, Vol.97 No.1084, 2004

C. Bazin, S. Parent and G. Chevalier, Addition of MillPebs to a pelletizing grinding mill. Minerals & Metallurgical Processing, Vol.21 No.4, 2004

H. Mio, J. Kano, F. Saito, Scale-up method of planetary ball mill., Chemical Engineering Science, Vol.59 No.24, 2004

M. Gentzler, J.N. Michaels, Impact attrition of brittle structured particles at low velocities: rigorous use of a laboratory vibrational impact tester., Chemical Engineering Science, Vol.59 No.24, 2004

P. Balaz, L. Takacs, M. Luxova, E. Godocikova, J. Ficeriova, Mechanochemical processing of sulphidic minerals., International Journal of Mineral Processing, Vol.74 No.1001, 2004

T. Sverak, Sorption purpose lime hydrate grinding., International Journal of Mineral Processing, Vol.74 No.1001, 2004

S. Sander, G. Schubert, H.-G. Jackel, The fundamentals of the comminution of metals in shredders of the swing-hammer type., International Journal of Mineral Processing, Vol.74 No.1001, 2004

D. Woldt, G. Schubert, H.-G. Jackel, Size reduction by means of low-speed rotary shears., International Journal of Mineral Processing, Vol.74 No.1001, 2004

M. Wilczek, J. Bertling, D. Hintemann, Optimised technologies for cryogenic grinding., International Journal of Mineral Processing, Vol.74 No.1001, 2004

F. Schaaff, M. Schneider, T. Neesze, Intensifying the attrition of mineral waste in stirrer mills., International Journal of Mineral Processing, Vol.74 No.1001, 2004

J.A. Herbst, A microscale look at tumbling mill scale-up using high fidelity simulation., International Journal of Mineral Processing, Vol.74 No.1001, 2004

V.E. Mizonov, H. Berthiaux, V.P. Zhukov, S. Bernotat, Application of multi-dimensional Markov chains to model kinetics of grinding with internal classification., International Journal of Mineral Processing, Vol.74 No.1001, 2004

D.W. Fuerstenau, A. De, P.C. Kapur, Linear and nonlinear particle breakage processes in comminution systems., International Journal of Mineral Processing, Vol.74 No.1001, 2004

L. Vogel, W. Peukert, Determination of material properties relevant to grinding by practicable labscale milling tests., International Journal of Mineral Processing, Vol.74 No.1001, 2004

U. Teipel, K. Leisinger, I. Mikonsaari, Comminution of crystalline material by ultrasonics., International Journal of Mineral Processing, Vol.74 No.1001, 2004

H.Z. Kuyumcu, L. Rolf, Application of high-pressure waterjets for comminution., International Journal of Mineral Processing, Vol.74 No.1001, 2004

G. Unland, P. Szczelina, Coarse crushing of brittle rocks by compression., International Journal of Mineral Processing, Vol.74 No.1001, 2004

S. Nikolov, Modelling and simulation of particle breakage in impact crushers., International Journal of Mineral Processing, Vol.74 No.1001, 2004

Y.S. Cheong, G.K. Reynolds, A.D. Salman, M.J. Hounslow, Modelling fragment size distribution using two-parameter Weibull equation., International Journal of Mineral Processing, Vol.74 No.1001, 2004

W. Oettel, K. Husemann, The effect of a grinding aid on comminution of fine limestone particle beds with single compressive load., International Journal of Mineral Processing, Vol.74 No.1001, 2004

Y. Reichardt, K. Schonert, Cross piston press for high pressure comminution of fine brittle materials., International Journal of Mineral Processing, Vol.74 No.1001, 2004

M.N. Pons, K. Belaroui, N. Simer, Characterisation of grinding media wear by visual texture., International Journal of Mineral Processing, Vol.74 No.1001, 2004

L.M. Tavares, R.P. King, Measurement of the load-deformation response from impact-breakage of particles., International Journal of Mineral Processing, Vol.74 No.1001, 2004

D.-I.C. Wadenpohl, Production of powder coatings with defined particle size distribution by grinding and inline classification., International Journal of Mineral Processing, Vol.74 No.1001, 2004

W. Peukert, Material properties in fine grinding., International Journal of Mineral Processing, Vol.74 No.1001, 2004

G. Schubert, S. Bernotat, Comminution of non-brittle materials., International Journal of Mineral Processing, Vol.74 No.1001, 2004

F. Garcia, N. Le Bolay, J.-L. Trompette, C. Frances, On fragmentation and agglomeration phenomena in an ultrafine wet grinding process: the role of polyelectrolyte additives., International Journal of Mineral Processing, Vol.74 No.1001, 2004

R. Schnatz, Optimization of continuous ball mills used for finish-grinding of cement by varying the L/D ratio, ball charge filling ratio, ball size and residence time., International Journal of Mineral Processing, Vol.74 No.1001, 2004

Y. Wang, E. Forssberg, J. Sachweh, Dry fine comminution in a stirred media mill-MaxxMill(R)., International Journal of Mineral Processing, Vol.74 No.1001, 2004

K.-E. Kurrer, E. Gock, V. Vogt, R. Florescu, Centrifugal tube mill for finest grinding., International Journal of Mineral Processing, Vol.74 No.1001, 2004

H. Mio, J. Kano, F. Saito, K. Kaneko, Optimum revolution and rotational directions and their speeds in planetary ball milling., International Journal of Mineral Processing, Vol.74 No.1001, 2004

A. Kwade, Mill selection and process optimization using a physical grinding model., International Journal of Mineral Processing, Vol.74 No.1001, 2004

H.-H. Stender, A. Kwade, J. Schwedes, Stress energy distribution in different stirred media mill geometries., International Journal of Mineral Processing, Vol.74 No.1001, 2004

S. Bernotat, Vibration mill results in the light of stress intensity and number of stressing events., International Journal of Mineral Processing, Vol.74 No.1001, 2004

B. Csoke, Z. Hatvani, D. Papanastassiou, K. Solymar, Investigation of grindability of diasporic bauxites in dry, aqueous and alkaline media as well as after high pressure crushing., International Journal of Mineral Processing, Vol.74 No.1001, 2004

L. Opoczky, V. Gavel, Effect of certain trace elements on the grindability of cement clinkers in the connection with the use of wastes., International Journal of Mineral Processing, Vol.74 No.1001, 2004

M. He, Y. Wang, E. Forssberg, Slurry rheology in wet ultrafine grinding of industrial minerals: a review., Powder Technology, Vol.147 No.1-3, 2004

H. Ipek, Y. Ucbas, C. Hosten, Ternary-mixture grinding of ceramic raw materials., Minerals Engineering, Vol.18 No.1, 2004

D. Norrgran, T. Shuttleworth, G. Rasmussen, Updated magnetic separation techniques to improve grinding circuit efficiency, Minerals Engineering, Vol.17 No.11-12, 2004

T. Neesse, V. Golyk, P. Kaniut, V. Reinsch, Hydrocyclone control in grinding circuits, Minerals Engineering, Vol.17 No.11-12, 2004

O. Guyot, T. Monredon, D. LaRosa, A. Broussaud, VisioRock, an integrated vision technology for advanced control of comminution circuits, Minerals Engineering, Vol.17 No.11-12, 2004

P.P. Rosario, R.A. Hall, D.M. Maijer, Improved gyratory crushing operation by the assessment of liner wear and mantle profile redesign, Minerals Engineering, Vol.17 No.11-12, 2004

B.K. Loveday, The use of FAG and SAG batch tests for measurement of abrasion rates of full-size rocks, Minerals Engineering, Vol.17 No.11-12, 2004

M.S. Powell, A.T. McBride, A three-dimensional analysis of media motion and grinding regions in mills, Minerals Engineering, Vol.17 No.11-12, 2004

G.W. Sand, G.K.N. Subasinghe, A novel approach to evaluating breakage parameters and modelling batch grinding, Minerals Engineering, Vol.17 No.11-12, 2004

J. Pontt, J. Rodriguez, W. Valderrama, G. Sepulveda, G. Alzamora, Resonance effects, power quality and reliability issues of high-power converters-fed drives employed in modern SAG circuits, Minerals Engineering, Vol.17 No.11-12, 2004

N. Djordjevic, F.N. Shi, R. Morrison, Determination of lifter design, speed and filling effects in AG mills by 3D DEM, Minerals Engineering, Vol.17 No.11-12, 2004

J. Pontt, MONSAG: A new monitoring system for measuring the load filling of a SAG mill, Minerals Engineering, Vol.17 No.11-12, 2004

M.J. Daniel, S. Morrell, HPGR model verification and scale-up, Minerals Engineering, Vol.17 No.11-12, 2004

T. Neesse, F. Schaaff, H. Tiefel, High performance attrition in stirred mills, Minerals Engineering, Vol.17 No.11-12, 2004

J. Yue, B. Klein, Influence of rheology on the performance of horizontal stirred mills, Minerals Engineering, Vol.17 No.11-12, 2004

R.W. Barley, J. Conway-Baker, R.D. Pascoe, J. Kostuch, B. McLoughlin, D.J. Parker, Measurement of the motion of grinding media in a vertically stirred mill using positron emission particle tracking (PEPT) Part II, Minerals Engineering, Vol.17 No.11-12, 2004

S.L. Gay, Simple texture-based liberation modelling of ores, Minerals Engineering, Vol.17 No.11-12, 2004

M. Lindqvist, C.M. Evertsson, Improved flow- and pressure model for cone crushers, Minerals Engineering, Vol.17 No.11-12, 2004

P.P. Rosario, R.A. Hall, D.M. Maijer, Liner wear and performance investigation of primary gyratory crushers, Minerals Engineering, Vol.17 No.11-12, 2004

T. Chenje, P. Radziszewski, Determining the steel media abrasive wear as a function of applied force and friction, Minerals Engineering, Vol.17 No.11-12, 2004

F. Shi, Comparison of grinding media-Cylpebs versus balls, Minerals Engineering, Vol.17 No.11-12, 2004

J.E. Sepulveda, Methodologies for the evaluation of grinding media consumption rates at full plant scale, Minerals Engineering, Vol.17 No.11-12, 2004

N. Kotake, T. Kawaguchi, H. Koizumi, Y. Kanda, A fundamental study of dry and wet grinding in bending tests on glass-effect of repeated impact on fracture probability, Minerals Engineering, Vol.17 No.11-12, 2004

J. Kolacz, Process efficiency aspects for jet mill plant operation, Minerals Engineering, Vol.17 No.11-12, 2004

A. Jankovic, W. Valery, E. Davis, Cement grinding optimisation, Minerals Engineering, Vol.17 No.11-12, 2004

L. While, L. Barone, P. Hingston, S. Huband, D. Tuppurainen, R. Bearman, A multi-objective evolutionary algorithm approach for crusher optimisation and flowsheet design, Minerals Engineering, Vol.17 No.11-12, 2004

R.D. Morrison, P.W. Cleary, Using DEM to model ore breakage within a pilot scale SAG mill, Minerals Engineering, Vol.17 No.11-12, 2004

Y. Liu, S. Spencer, Dynamic simulation of grinding circuits, Minerals Engineering, Vol.17 No.11-12, 2004

D. Morton, S. Dunstall, Using the Web to increase the availability of DEM-based mill modelling, Minerals Engineering, Vol.17 No.11-12, 2004

S.W. Kingman, K. Jackson, S.M. Bradshaw, N.A. Rowson, R. Greenwood, An investigation into the influence of microwave treatment on mineral ore comminution, Powder Technology, Vol.146 No.3, 2004

Y. Kilinc, S. Ozturk, B. Ozturk, I. Uslan, Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor, Powder Technology, Vol.146 No.3, 2004

T. Yalcin, E. Idusuyi, R. Johnson, C. Sturgess, A simulation study of sulphur grindability in a batch ball mill, Powder Technology, Vol.146 No.3, 2004

S.W. Kingman, K. Jackson, A. Cumbane, S.M. Bradshaw, N.A. Rowson, R. Greenwood, Recent developments in microwave-assisted comminution., International Journal of Mineral Processing, Vol.74 No.1-4, 2004

S. Morrell, An alternative energy-size relationship to that proposed by Bond for the design and optimisation of grinding circuits., International Journal of Mineral Processing, Vol.74 No.1-4, 2004

S. Aman, J. Tomas, Mechanoluminescence of quartz particles during grinding in a stirred media mill, Powder Technology, Vol.146 No.1-2, 2004

H. Kalman, M. Hubert, E. Grant, Y. Petukhov, M. Haim, Fatigue behavior of impact comminution and attrition units, Powder Technology, Vol.146 No.1-2, 2004

Bazin, C., and Hodouin, D., A graphical method to assess size reduction by grinding. Mineral Processing and Extractive Metallurgy, Vol.113 No.2, 2004

Matos, M.J., Goncalves, J.H., and Marto, M.H., Testing incomplete Beta function to describe composition of real unliberated particles. Mineral Processing and Extractive Metallurgy, Vol.113 No.2, 2004

Smith, G.C., et al, Innovative process control technology for milling and flotation circuit operations. J. South African IMM, Vol.104 No.6, 2004

V. Gente, F. La Marca, F. Lucci, P. Massacci, E. Pani, Cryo-comminution of plastic waste, Waste Management, Vol.24 No.7, 2004

K. Akcay, A. Sirkecioglu, M. Tatlier, O.T. Savasci, A. Erdem-Senatalar, Wet ball milling of zeolite HY, Powder Technology, Vol.142 No.2-3, 2004

L.M. Tavares, Optimum routes for particle breakage by impact, Powder Technology, Vol.142 No.2-3, 2004

Jasper, B. Prisbrey, K., Molecular mechanics of mechanochemical TiCl4 reduction in ball mills. Minerals and Metallurgical Processing, Vol.21 No.2, 2004

Orumwense, O. A. Negeri, T. Lastra, R., Effect of microwave pretreatment on the liberation characteristics of a massive sulfide ore. Minerals and Metallurgical Processing, Vol.21 No.2, 2004

Stamboliadis, E. T., Energy Distribution in Comminution: A New Approach to the Laws of Rittinger, Bond and Kick. Canadian Metallurgical Quarterly, Vol.43 No.2, 2004

C.J. Greet, G.L. Small, P. Steinier, S.R. Grano, The Magotteaux Mill: investigating the effect of grinding media on pulp chemistry and flotation performance. Minerals Engineering, Vol.17 No.7-8, 2004

Davey, G., Fine copper grinding using Metso's Stirred Media Detritor. Mining Engineering, Vol.56 No.4, 2004

H. Walqui and A. Buendía, New 6.4-m-diam, 10-m-long ball mill at Toquepala concentrator. Minerals and Metallurgical Processing, Vol.21 No.1, 2004

A.O. Orumwense and T. Negeri, Impact of microwave irradiation on the processing of a sulfide ore. Minerals and Metallurgical Processing, Vol.21 No.1, 2004

E.Th. Stamboliadis, Surface energy potential of single particles and size distribution of broken particulate materials. Minerals and Metallurgical Processing, Vol.21 No.1, 2004

Petack, B., Crushing plants for all types of application. Bulk Solids Handling, Vol.24 No.1, 2004

Tudeshki, H., et al, Cost reduction by optimization of the primary crusher position. Bulk Solids Handling, Vol.24 No.1, 2004

M. Yekeler, U. Ulusoy, C. Hicyilmaz, Effect of particle shape and roughness of talc mineral ground by different mills on the wettability and floatability. Powder Technology, Vol.140 No.1-2, 2004

V. Deniz, New wavelet-based adaptive method for the breakage equation. Powder Technology, Vol.139 No.3, 2004

A. Kobayashi, H. Nagasaka, K. Iizuka, H. Yoshida, Characteristics of open- and closed-circuit grinding systems. Separation and Purification Technology, Vol.36 No.2, 2004

S.L. Gay, A liberation model for comminution based on probability theory. Minerals Engineering, Vol.17 No.4, 2004

S. Sener, S. Bilgen, G. Ozbayoglu, Effect of heat treatment on grindabilities of celestite and gypsum and separation of heated mixture by differential grinding. Minerals Engineering, Vol.17 No.3, 2004

S. Morrell, A new autogenous and semi-autogenous mill model for scale-up, design and optimisation. Minerals Engineering, Vol.17 No.3, 2004

S. Morrell, Predicting the specific energy of autogenous and semi-autogenous mills from small diameter drill core samples. Minerals Engineering, Vol.17 No.3, 2004

C.C. Pilevneli, S. Kizgut, I. Toroglu, D. Cuhadaroglu, E. Yigit, Open and closed circuit dry grinding of cement mill rejects in a pilot scale vertical stirred mill. Powder Technology, Vol.139 No.2, 2004

Y. Liu, M.O. Tade, New wavelet-based adaptive method for the breakage equation. Powder Technology, Vol.139 No.1, 2004