Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010: 2009 : 2008 : 2007: 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

Ipek, H., et al, Grinding of ceramic raw materials by a standard Bond mill: quartz, kaolin and K-feldspar, Mineral Processing and Extractive Metallurgy, Vol.114 No.4, 2005

J.T. Kalala, M. Bwalya and M.H. Moys, Discrete element method (DEM) modelling of evolving mill liner profiles due to wear. Part II. Industrial case study , Minerals Engineering, Vol.18 No.15, 2005

C.J. Agnew, N.J. Welham, Oxidation of chalcopyrite by extended milling, International Journal of Mineral Processing, Vol.77 No.4, 2005

G. Atesok, M. Ozer, F. Boylu, H. Dincer, The effect of anionic dispersants on grindability of different rank coals, International Journal of Mineral Processing, Vol.77 No.4, 2005

van Drunick, W.I., and Penny, B., Expert mill control at AngloGold Ashanti, Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.7, 2005

Spriggs, G.H., In-pit crushing considerations for conveying and materials handling systems. Bulk Solids Handling, Vol.25 2005

Royston, D., Review of recent experience with large-angle, wide-spaced shell lifter liners. Mining Engineering, Vol.57 No.8, 2005

G. Huang, S. Grano, Galvanic interaction of grinding media with pyrite and its effect on flotation, Minerals Engineering, Vol.18 No.12, 2005

R. Chandramohan, M.S. Powell, Measurement of particle interaction properties for incorporation in the discrete element method simulation, Minerals Engineering, Vol.18 No.12, 2005

Tano, K., et al, On-line measurement of charge position and filling level in industrial-scale mills, Minerals & Metallurgical Processing, Vol.22 No.3, 2005

Summers, C.A., et al, Grinding methods to enhance the reactivity of olivine, Minerals & Metallurgical Processing, Vol.22 No.3, 2005

Menendez-Aguado, J.M., et al, Determination of work index in a common laboratory mill, Minerals & Metallurgical Processing, Vol.22 No.3, 2005

D. Eskin, O. Zhupanska, R. Hamey, B. Moudgil, B. Scarlett, Microhydrodynamics of stirred media milling, Powder Technology, Vol.156 No.2-3, 2005

F. Stenger, S. Mende, J. Schwedes, W. Peukert, The influence of suspension properties on the grinding behavior of alumina particles in the submicron size range in stirred media mills, Powder Technology, Vol.156 No.2-3, 2005

R.B. Diemer, D.E. Spahr, J.H. Olson, R.V. Magan, Interpretation of size reduction data via moment models, Powder Technology, Vol.156 No.2-3, 2005

Girard, M. Hodouin, D. Bazin, C., Ability of Kinetic Flotation Models to Simulate Interactions Between Grinding and Flotation, Canadian Metallurgical Quarterly, Vol.44 No.3, 2005

K.T. Tano, B.I. Palsson, A. Sellgren, On-line lifter deflection measurements showing flow resistance effects in grinding mills, Minerals Engineering, Vol.18 No.11, 2005

J. Yianatos, N. Bergh, R. Bucarey, J. Rodriguez, F. Diaz, The effect of fines recycling on industrial grinding performance, Minerals Engineering, Vol.18 No.11, 2005

C. Bazin, Data reconciliation for the calibration of a model for batch grinding, Minerals Engineering, Vol.18 No.10, 2005

H.T. Ozkahraman, A meaningful expression between Bond work index, grindability index and friability value, Minerals Engineering, Vol.18 No.10, 2005

H. Ipek, Y. Ucbas, C. Hosten, The Bond work index of mixtures of ceramic raw materials, Minerals Engineering, Vol.18 No.9, 2005

M. Zbik, R.St.C. Smart, Influence of dry grinding on talc and kaolinite morphology: inhibition of nano-bubble formation and improved dispersion, Minerals Engineering, Vol.18 No.9, 2005

A.H. Mwale, P. Musonge, D.M. Fraser, The influence of particle size on energy consumption and water recovery in comminution and dewatering systems, Minerals Engineering, Vol.18 No.9, 2005

Momber, A.W., A single-stage size-reduction process for the generation of fine-grained concrete, Mineral Processing and Extractive Metallurgy, Vol.114 No.2, 2005

Welham, N.J., and Setoudeh, N., Effect of milling in oxygen on sphalerite-bearing materials, Mineral Processing and Extractive Metallurgy, Vol.114 No.2, 2005

C. Bouche, C. Brandt, A. Broussaud, v.W. Drunick, Advanced control of gold ore grinding plants in South Africa, Minerals Engineering, Vol.18 No.8, 2005

E. Nel, M. Valenta, N. Naude, Influence of open circuit regrind milling on UG-2 ore composition and mineralogy at Impala's UG-2 concentrator, Minerals Engineering, Vol.18 No.8, 2005

L. Vogel, W. Peukert, From single particle impact behaviour to modelling of impact mills, Chemical Engineering Science, Vol.60 No.18, 2005

F. Stenger, S. Mende, J. Schwedes, W. Peukert, Nanomilling in stirred media mills, Chemical Engineering Science, Vol.60 No.16, 2005

Free, K.S., et al, Evaluation of a new method for work index estimation using single particle impact tests, Minerals & Metallurgical Processing, Vol.22 No.2, 2005

E. Bilgili, B. Scarlett, Population balance modeling of non-linear effects in milling processes, Powder Technology, Vol.153 No.1, 2005

L.M. Tavares, Particle weakening in high-pressure roll grinding, Minerals Engineering, Vol.18 No.7, 2005

D.A. Jones, S.W. Kingman, D.N. Whittles, I.S. Lowndes, Understanding microwave assisted breakage, Minerals Engineering, Vol.18 No.7, 2005

R. K. Amankwah, A. U. Khan, C. A. Pickles and W. T. Yen, Improved grindability and gold liberation by microwave pretreatment of a free-milling gold ore, Mineral Processing and Extractive Metallurgy, Vol.114 No.1, 2005

Pourghahramani, P., and Forssberg, E., Review of applied particel shape descriptors and produced particle shapes in grinding environments. Part I: particle shape descriptors. Mineral Processing and Extractive Metallurgy Review, Vol.26 No.2, 2005

Pourghahramani, P., and Forssberg, E., Review of applied particel shape descriptors and produced particle shapes in grinding environments. Part II: the influence of comminution on the particle shape. Mineral Processing and Extractive Metallurgy Review, Vol.26 No.2, 2005

Yu, X., et al, Deformation behaviour of rocks under compression and direct tension, Journal of the South African Institute of Mining and Metallurgy, Vol.105 No.1, 2005

Kalala, J.T., and Moys, M.H., Discrete element modelling of liner wear in dry ball grinding, Journal of the South African Institute of Mining and Metallurgy, Vol.104 No.10, 2005

C. Bazin, C. B-Chapleau, The difficulty associated with measuring slurry rheological properties and linking them to grinding mill performance, International Journal of Mineral Processing, Vol.76 No.1-2, 2005

P. Svedensten, C.M. Evertsson, Crushing plant optimisation by means of a genetic evolutionary algorithm, Minerals Engineering, Vol.18 No.5, 2005

D. Tao, G.L. Chen, B.K. Parekh, Corrosion protection of mild carbon steel media in phosphate grinding mill using impressed current technology, Minerals Engineering, Vol.18 No.5, 2005

C. Hosten, An alternative solution to the grinding equation in cumulative size distribution form, Minerals Engineering, Vol.18 No.5, 2005

H. Benzer, Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit, Powder Technology, Vol.150 No.3, 2005

S. Michaux, N. Djordjevic, Influence of explosive energy on the strength of the rock fragments and SAG mill throughput, Minerals Engineering, Vol.18 No.4, 2005

C. Bazin, M. St-Pierre, D. Hodouin, Calibration of the perfect mixing model to a dry grinding mill, Powder Technology, Vol.149 No.2-3, 2005

Orford, I., et al, Design and wear of SAG mill shell liners at Brunswick mine, CIM Bulletin, Vol.98 No.1085, 2005

M.B. Castro, J.A.M. Remmerswaal, J.C. Brezet, A. van Schaik, M.A. Reuter, A simulation model of the comminution-liberation of recycling streams - Relationships between product design and the liberation of materials during recycling., International Journal of Mineral Processing, Vol.75 No.3-4, 2005

W. Schubert, M. Khanal, J. Tomas, Impact crushing of particle-particle compounds-experiment and simulation, International Journal of Mineral Processing, Vol.75 No.1-2, 2005

M. Ramasamy, S.S. Narayanan, C.D.P. Rao, Control of ball mill grinding circuit using model predictive control scheme., Journal of Process Control, Vol.15 No.3, 2005

A. Heim, T.P. Olejnik, A. Pawlak, Using statistical moments to describe grinding in a ball mill for industrial-scale process., Chemical Engineering and Processing, Vol.44 No.2, 2005

V. Mizonov, V. Zhukov, A. Korovkin, H. Berthiaux, On possible instability of throughputs in complex milling circuits., Chemical Engineering and Processing, Vol.44 No.2, 2005

P.B. Kis, C. Mihalyko, B.G. Lakatos, Optimising design of continuous grinding mill-classifier systems., Chemical Engineering and Processing, Vol.44 No.2, 2005