Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011: 2010 : 2009: 2008: 2007: 2006: 2005: 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

N. Djordjevic, Improvement of energy efficiency of rock comminution through reduction of thermal losses, Minerals Engineering, Vol. 23, No. 15, 2010

M. Yahyaei, S. Banisi, Spreadsheet-based modeling of liner wear impact on charge motion in tumbling mills, Minerals Engineering, Vol. 23, No. 15, 2010

M. Rezaeizadeh, M. Fooladi, M.S. Powell, S.H. Mansouri, Experimental observations of lifter parameters and mill operation on power draw and liner impact loading, Minerals Engineering, Vol. 23, No. 15, 2010

M. Rezaeizadeh, M. Fooladi, M.S. Powell, S.H. Mansouri, N.S. Weerasekara, A new predictive model of lifter bar wear in mills, Minerals Engineering, Vol. 23, No. 15, 2010

F. Rodriguez, M. Ramirez, R. Ruiz, F. Concha, Scale-up procedure for industrial cage mills, International Journal of Mineral Processing, Vol. 97, No. 1-4, 2010

D.W. Fuerstenau, A.Z.M. Abouzeid, P.B. Phatak, Effect of particulate environment on the kinetics and energetics of dry ball milling, International Journal of Mineral Processing, Vol. 97, No. 1-4, 2010

N.A. Palm, N.J. Shackleton, V. Malysiak, C.T. O'Connor, The effect of using different comminution procedures on the flotation of sphalerite, Minerals Engineering, Vol. 23, No. 11-13, 2010

X. Ye, S. Gredelj, W. Skinner, S.R. Grano, Evidence for surface cleaning of sulphide minerals by attritioning in stirred mills, Minerals Engineering, Vol. 23, No. 11-13, 2010

T. Maksimainen, S. Luukkanen, P. Morsky, R. Kalapudas, The effect of grinding environment on flotation of sulphide poor PGE ores, Minerals Engineering, Vol. 23, No. 11-13, 2010

A. Remes, J. Aaltonen, H. Koivo, Grinding circuit modeling and simulation of particle size control at Siilinjarvi concentrator, International Journal of Mineral Processing, Vol. 96, No. 1-4, 2010

C.T. Jayasundara, R.Y. Yang, A.B. Yu, J. Rubenstein, Effects of disc rotation speed and media loading on particle flow and grinding performance in a horizontal stirred mill, International Journal of Mineral Processing, Vol. 96, No. 1-4, 2010

X. Ye, S. Gredelj, W. Skinner, S.R. Grano, Regrinding sulphide minerals -- Breakage mechanisms in milling and their influence on surface properties and flotation behaviour, Powder Technology, Vol. 203, No. 2, 2010

A.Y. Ali, S.M. Bradshaw, Bonded-particle modelling of microwave-induced damage in ore particles, Minerals Engineering, Vol. 23, No. 10, 2010

O.Y. Toraman, S. Kahraman, S. Cayirli, Predicting the crushability of rocks from the impact strength index, Minerals Engineering, Vol. 23, No. 9, 2010

M. Kor, E. Abkhoshk, D. Tao, G.L. Chen, H. Modarres, Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique, Minerals Engineering, Vol. 23, No. 9, 2010

J. Tang, Li-jie Zhao, Jun-wu Zhou, H. Yue, Tian-you Chai, Experimental analysis of wet mill load based on vibration signals of laboratory-scale ball mill shell, Minerals Engineering, Vol. 23, No. 9, 2010

F.P. van der Meer, A. Gruendken, Flowsheet considerations for optimal use of high pressure grinding rolls, Minerals Engineering, Vol. 23, No. 9, 2010

Stamboliadis, E., The theory of surface potential energy, minimum particle size and non-fractal nature of fragmentation, Canadian Metallurgical Quarterly, Vol.49, No.2, 2010

Samanli, S., et al, Investigation of breakage behavior of coal in a laboratory-scale stirred media mill, International Journal of Coal Preparation and Utilization, Vol.30 No.1, 2010

L.M. Hlavac, I.M. Hlavacova, P. Jandacka, J. Zegzulka, J. Viliamsova, J. Vasek, V. Madr, Comminution of material particles by water jets -- Influence of the inner shape of the mixing chamber, International Journal of Mineral Processing, Vol. 95, No. 1-4, 2010

M. Fabian, M. Shopska, D. Paneva, G. Kadinov, N. Kostova, E. Turianicova, J. Briancin, I. Mitov, R.A. Kleiv, P. Balaz, The influence of attrition milling on carbon dioxide sequestration on magnesium-iron silicate, Minerals Engineering, Vol. 23, No. 8, 2010

Y. Peng, S. Grano, Effect of grinding media on the activation of pyrite flotation, Minerals Engineering, Vol. 23, No. 8, 2010

Morley, C., HPGR- FAQ, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Rosario, P., and Hall, R., A structured approach to the evaluation of the energy requirements of HPGR and SAG mill circuits in hard ore applications, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Andres, K., and Haude, F., Application of the Palla vibrating mill in ultra fine grinding circuits, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Clermont, B., and de Haas, B., Optimization of mill performance by using online ball and pulp measurements, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Jankovic, A., et al, Relationships between comminution energy and product size for a magnetite ore, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Weber, U., and Langlois, D., The effect of grinding media performance on milling and operational behaviour, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

Ozkahraman, H.T., Breakage mechanisms and an encouraging correlation between the Bond parameters and the friability value, Journal of the South African Institute of Mining and Metallurgy, Vol.110, No.3, 2010

N. Vdovic, I. Jurina, S.D. Skapin, I. Sondi, The surface properties of clay minerals modified by intensive dry milling -- revisited, Applied Clay Science, Vol. 48, No. 4, 2010

M. Bengtsson, E. Lee, C.M. Evertsson, Influence of throw and compression ratio on particle shape - A full scale investigation and laboratory tests, Minerals Engineering, Vol. 23, No. 7, 2010

M. Rezaeizadeh, M. Fooladi, M.S. Powell, N.S. Weerasekara, An experimental investigation of the effects of operating parameters on the wear of lifters in tumbling mills, Minerals Engineering, Vol. 23, No. 7, 2010

L.R.D. Jensen, H. Friis, E. Fundal, P. Moller, P.B. Brockhoff, M. Jespersen, Influence of quartz particles on wear in vertical roller mills. Part I: Quartz concentration, Minerals Engineering, Vol. 23, No. 5, 2010

T.G. Vizcarra, E.M. Wightman, N.W. Johnson, E.V. Manlapig, The effect of breakage mechanism on the mineral liberation properties of sulphide ores, Minerals Engineering, Vol. 23, No. 5, 2010

S.L.A. Hennart, W.J. Wildeboer, P. van Hee, G.M.H. Meesters, Stability of particle suspensions after fine grinding, Powder Technology, Vol. 199, No. 3, 2010

R. Gers, E. Climent, D. Legendre, D. Anne-Archard, C. Frances, Numerical modelling of grinding in a stirred media mill: Hydrodynamics and collision characteristics, Chemical Engineering Science, Vol. 65, No. 6, 2010

M. Xia, Y. Jiang, L. Zhao, F. Li, B. Xue, M. Sun, D. Liu, X. Zhang, Wet grinding of montmorillonite and its effect on the properties of mesoporous montmorillonite, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 356, No. 1-3, 2010

S. Aman, J. Tomas, H. Kalman, Breakage probability of irregularly shaped particles, Chemical Engineering Science, Vol. 65, No. 5, 2010

A.R. Ramadan, A.M.K. Esawi, A.A. Gawad, Effect of ball milling on the structure of Na⁺-montmorillonite and organo-montmorillonite (Cloisite 30B), Applied Clay Science, Vol. 47, No. 3-4, 2010

A. Refahi, J. Aghazadeh Mohandesi, B. Rezai, Discrete element modeling for predicting breakage behavior and fracture energy of a single particle in a jaw crusher, International Journal of Mineral Processing, Vol. 94, No. 1-2, 2010

H. Lee, H. Cho, J. Kwon, Using the discrete element method to analyze the breakage rate in a centrifugal/vibration mill, Powder Technology, Vol. 198, No. 3, 2010

J. Yang, S. Li, X. Chen, Q. Li, Disturbance rejection of ball mill grinding circuits using DOB and MPC, Powder Technology, Vol. 198, No. 2, 2010

S. Morrell, Predicting the specific energy required for size reduction of relatively coarse feeds in conventional crushers and high pressure grinding rolls, Minerals Engineering, Vol. 23, No. 2, 2010

H. Choi, W. Lee, D.U. Kim, S. Kumar, S.S. Kim, H.S. Chung, J.H. Kim, Y.C. Ahn, Effect of grinding aids on the grinding energy consumed during grinding of calcite in a stirred ball mill, Minerals Engineering, Vol. 23, No. 1, 2010

M.Sh. Bafghi, A.H. Emami, A. Zakeri, J. Vahdati Khaki, Development and verification of a mathematical model for variations of the specific surface area of mineral powders during intensive milling, Powder Technology, Vol. 197, No. 1-2, 2010