Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012: 2011 : 2010: 2009: 2008: 2007: 2006: 2005: 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

A.Y. Ali, S.M. Bradshaw, Confined particle bed breakage of microwave treated and untreated ores, Minerals Engineering, Vol. 24, No. 14, 2011

C. Meimaris, W.K.K. Lai, On the comparison between measured and calculated stresses in large SAG mills, Minerals Engineering, Vol. 24, No. 14, 2011

H.I. Parra Galvez, Analysis of the state of the art of blast-induced fragment conditioning, Minerals Engineering, Vol. 24, No. 14, 2011

V. Rizmanoski, The effect of microwave pretreatment on impact breakage of copper ore, Minerals Engineering, Vol. 24, No. 14, 2011

C.T. Jayasundara, R.Y. Yang, A.B. Yu, D. Curry, Prediction of the disc wear in a model IsaMill and its effect on the flow of grinding media, Minerals Engineering, Vol. 24, No. 14, 2011

F.M. Katubilwa, M.H. Moys, Effects of filling degree and viscosity of slurry on mill load orientation, Minerals Engineering, Vol. 24, No. 13, 2011

P. Kodali, N. Dhawan, T. Depci, C.L. Lin, J.D. Miller, Particle damage and exposure analysis in HPGR crushing of selected copper ores for column leaching, Minerals Engineering, Vol. 24, No. 13, 2011

T.G. Vizcarra, E.M. Wightman, N.W. Johnson, E.V. Manlapig, The effect of breakage method on the shape properties of an iron-oxide hosted copper-gold ore, Minerals Engineering, Vol. 24, No. 13, 2011

P. Hosseini, S. Martins, T. Martin, P. Radziszewski, F.-R. Boyer, Acoustic emissions simulation of tumbling mills using charge dynamics, Minerals Engineering, Vol. 24, No. 13, 2011

N. Solomon, M. Becker, A. Mainza, J. Petersen, J.-P. Franzidis, Understanding the influence of HPGR on PGM flotation behavior using mineralogy, Minerals Engineering, Vol. 24, No. 12, 2011

D. Asahina, J.E. Bolander, Voronoi-based discretizations for fracture analysis of particulate materials, Powder Technology, Vol. 213, No. 1-3, 2011

E. Bilgili, M. Capece, Quantitative analysis of multi-particle interactions during particle breakage: A discrete non-linear population balance framework, Powder Technology, Vol. 213, No. 1-3, 2011

P. Zhou, T.Y. Chai, Grinding circuit control: A hierarchical approach using extended 2-DOF decoupling and model approximation, Powder Technology, Vol. 213, No. 1-3, 2011

C. Schilde, S. Beinert, A. Kwade, Comparison of the micromechanical aggregate properties of nanostructured aggregates with the stress conditions during stirred media milling, Chemical Engineering Science, Vol. 66, No. 21, 2011

G. Mucsi, B. Csoke, K. Solymar, Grindability characteristics of lateritic and karst bauxites, International Journal of Mineral Processing, Vol. 100, No. 3-4, 2011

S. Rosenkranz, S. Breitung-Faes, A. Kwade, Experimental investigations and modelling of the ball motion in planetary ball mills, Powder Technology, Vol. 212, No. 1, 2011

S. Sadrai, J.A. Meech, D. Tromans, F. Sassani, Energy efficient comminution under high velocity impact fragmentation, Minerals Engineering, Vol. 24, No. 10, 2011

W.J. Bruckard, G.J. Sparrow, J.T. Woodcock, A review of the effects of the grinding environment on the flotation of copper sulphides, International Journal of Mineral Processing, Vol. 100, No. 1-2, 2011

E. Hulthen, C.M. Evertsson, Real-time algorithm for cone crusher control with two variables, Minerals Engineering, Vol. 24, No. 9, 2011

N.A. Chapman, N.J. Shackleton, V. Malysiak, C.T. O'Connor, The effect of using different comminution procedures on the flotation of Platinum-Group Minerals, Minerals Engineering, Vol. 24, No. 8, 2011

A.B. Makokha, M.H. Moys, Characterizing slurry hydrodynamic transport in a large overflow tubular ball mill by an improved mixing cell model based on tracer response data, Powder Technology, Vol. 211, No. 2-3, 2011

P. Toneva, P. Epple, M. Breuer, W. Peukert, K.-E. Wirth, Grinding in an air classifier mill -- Part I: Characterisation of the one-phase flow, Powder Technology, Vol. 211, No. 1, 2011

P. Toneva, K.-E. Wirth, W. Peukert, Grinding in an air classifier mill -- Part II: Characterisation of the two-phase flow, Powder Technology, Vol. 211, No. 1, 2011

A. Shrivastava, S. Sakthivel, B. Pitchumani, A.S. Rathore, A statistical approach for estimation of significant variables in wet attrition milling, Powder Technology, Vol. 211, No. 1, 2011

D.W. Fuerstenau, P.B. Phatak, P.C. Kapur, A.-Z.M. Abouzeid, Simulation of the grinding of coarse/fine (heterogeneous) systems in a ball mill, International Journal of Mineral Processing, Vol. 99, No. 1-4, 2011

O. Lecoq, A. Chamayou, J.A. Dodds, P. Guigon, Application of a simplifying model to the breakage of different materials in an air jet mill, International Journal of Mineral Processing, Vol. 99, No. 1-4, 2011

E.F. Crespo, Application of particle fracture energy distributions to ball milling kinetics, Powder Technology, Vol. 210, No. 3, 2011

G. Ofori-Sarpong, R.K. Amankwah, Comminution environment and gold particle morphology: Effects on gravity concentration, Minerals Engineering, Vol. 24, No. 6, 2011

R.K. Amankwah, G. Ofori-Sarpong, Microwave heating of gold ores for enhanced grindability and cyanide amenability, Minerals Engineering, Vol. 24, No. 6, 2011

F.M. Katubilwa, M.H. Moys, D. Glasser, D. Hildebrandt, An attainable region analysis of the effect of ball size on milling, Powder Technology, Vol. 210, No. 1, 2011

R. Sakthivel, K. Jayasankar, S.K. Das, B. Das, B.K. Mishra, Effect of planetary ball milling on phase transformation of a silica-rich iron ore, Powder Technology, Vol. 208, No. 3, 2011

J. Bruchmuller, B.G.M. van Wachem, S. Gu, K.H. Luo, Modelling discrete fragmentation of brittle particles, Powder Technology, Vol. 208, No. 3, 2011

S. Nomura, T. Tanaka, Analysis of energy-size reduction relationships in batch tumbling ball mills, Powder Technology, Vol. 208, No. 3, 2011

L. Maharaj, B.K. Loveday, J. Pocock, The effect of the design of a secondary grinding circuit on platinum flotation from a UG-2 ore, Minerals Engineering, Vol. 24, No. 3-4, 2011

A.P. van der Westhuizen, I. Govender, A.N. Mainza, J. Rubenstein, Tracking the motion of media particles inside an IsaMill(TM) using PEPT, Minerals Engineering, Vol. 24, No. 3-4, 2011

L.S. Bbosa, I. Govender, A.N. Mainza, M.S. Powell, Power draw estimations in experimental tumbling mills using PEPT, Minerals Engineering, Vol. 24, No. 3-4, 2011

T.S. Volkwyn, A. Buffler, I. Govender, J.-P. Franzidis, A.J. Morrison, A. Odo, N.P. van der Meulen, C. Vermeulen, Studies of the effect of tracer activity on time-averaged positron emission particle tracking measurements on tumbling mills at PEPT Cape Town, Minerals Engineering, Vol. 24, No. 3-4, 2011

K. Sichalwe, I. Govender, A.N. Mainza, Characterising porosity of multi-component mixtures in rotary mills, Minerals Engineering, Vol. 24, No. 3-4, 2011

D.V.V. Kallon, I. Govender, A.N. Mainza, Circulation rate modelling of mill charge using position emission particle tracking, Minerals Engineering, Vol. 24, No. 3-4, 2011

B.Y. Farber, B. Durant, N. Bedesi, Effect of media size and mechanical properties on milling efficiency and media consumption, Minerals Engineering, Vol. 24, No. 3-4, 2011

S.P. Das, D.P. Das, S.K. Behera, B.K. Mishra, Interpretation of mill vibration signal via wireless sensing, Minerals Engineering, Vol. 24, No. 3-4, 2011

P. Rosario, R. Hall, M. Grundy, B. Klein, A preliminary investigation into the feasibility of a novel HPGR-based circuit for hard, weathered ores containing clayish material, Minerals Engineering, Vol. 24, No. 3-4, 2011

H. Benzer, N.A. Aydogan, H. Dundar, Investigation of the breakage of hard and soft components under high compression: HPGR application, Minerals Engineering, Vol. 24, No. 3-4, 2011

P. Keshav, B. de Haas, B. Clermont, A. Mainza, M. Moys, Optimisation of the secondary ball mill using an on-line ball and pulp load sensor - The Sensomag, Minerals Engineering, Vol. 24, No. 3-4, 2011

E. Lee, C.M. Evertsson, A comparative study between cone crushers and theoretically optimal crushing sequences, Minerals Engineering, Vol. 24, No. 3-4, 2011

N.A. Aydogan, H. Benzer, Comparison of the overall circuit performance in the cement industry: High compression milling vs. ball milling technology, Minerals Engineering, Vol. 24, No. 3-4, 2011

D. Eksi, A.H. Benzer, A. Sargin, O. Genc, A new method for determination of fine particle breakage, Minerals Engineering, Vol. 24, No. 3-4, 2011

I. Govender, N. Mangesana, A.N. Mainza, J.-P. Franzidis, Measurement of shear rates in a laboratory tumbling mill, Minerals Engineering, Vol. 24, No. 3-4, 2011

A.B. Makokha, M.H. Moys, M.M. Bwalya, Modeling the RTD of an industrial overflow ball mill as a function of load volume and slurry concentration, Minerals Engineering, Vol. 24, No. 3-4, 2011

M.S. Powell, N.S. Weerasekara, S. Cole, R.D. LaRoche, J. Favier, DEM modelling of liner evolution and its influence on grinding rate in ball mills, Minerals Engineering, Vol. 24, No. 3-4, 2011

P.W. Cleary, R.D. Morrison, Understanding fine ore breakage in a laboratory scale ball mill using DEM, Minerals Engineering, Vol. 24, No. 3-4, 2011

P. Jonsen, B.I. Palsson, K. Tano, A. Berggren, Prediction of mill structure behaviour in a tumbling mill, Minerals Engineering, Vol. 24, No. 3-4, 2011

E. Tugcan Tuzcu, R.K. Rajamani, Modeling breakage rates in mills with impact energy spectra and ultra fast load cell data, Minerals Engineering, Vol. 24, No. 3-4, 2011

O. Altun, H. Benzer, H. Dundar, N.A. Aydogan, Comparison of open and closed circuit HPGR application on dry grinding circuit performance, Minerals Engineering, Vol. 24, No. 3-4, 2011

G.K.P. Barrios, R.M. de Carvalho, L.M. Tavares, Modeling breakage of monodispersed particles in unconfined beds, Minerals Engineering, Vol. 24, No. 3-4, 2011

C.T. Jayasundara, R.Y. Yang, B.Y. Guo, A.B. Yu, I. Govender, A. Mainza, A. van der Westhuizen, J. Rubenstein, CFD-DEM modelling of particle flow in IsaMills - Comparison between simulations and PEPT measurements, Minerals Engineering, Vol. 24, No. 3-4, 2011

H. Dundar, H. Benzer, N.A. Aydogan, O. Altun, N.A. Toprak, O. Ozcan, D. Eksi, A. Sargin, Simulation assisted capacity improvement of cement grinding circuit: Case study cement plant, Minerals Engineering, Vol. 24, No. 3-4, 2011

I. Govender, G.B. Tupper, A.N. Mainza, Towards a mechanistic model for slurry transport in tumbling mills, Minerals Engineering, Vol. 24, No. 3-4, 2011

B.A. Rodriguez, J.M. Menendez-Aguado, A. Coello-Velazquez, B.R. Dzioba, Transient state analysis by simulation in a closed grinding circuit, Minerals Engineering, Vol. 24, No. 5, 2011

E. Wang, F. Shi, E. Manlapig, Pre-weakening of mineral ores by high voltage pulses, Minerals Engineering, Vol. 24, No. 5, 2011

V. Hasanzadeh, A. Farzanegan, Robust HPGR model calibration using genetic algorithms, Minerals Engineering, Vol. 24, No. 5, 2011

M. Capece, E. Bilgili, R. Dave, Identification of the breakage rate and distribution parameters in a non-linear population balance model for batch milling, Powder Technology, Vol. 208, No. 1, 2011

Z. Chen, J.R. Grace, C. Jim Lim, Development of particle size distribution during limestone impact attrition, Powder Technology, Vol. 207, No. 1-3, 2011

M. Sri Raj Rajeswari, K.A.M. Azizli, S.F.S. Hashim, M.K. Abdullah, M. Abdul Mujeebu, M.Z. Abdullah, CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill, International Journal of Mineral Processing, Vol. 98, No. 1-2, 2011

X. Wang, W. Gui, C. Yang, Y. Wang, Wet grindability of an industrial ore and its breakage parameters estimation using population balances, International Journal of Mineral Processing, Vol. 98, No. 1-2, 2011

M. Sinnott, P.W. Cleary, R.D. Morrison, Slurry flow in a tower mill, Minerals Engineering, Vol. 24, No. 2, 2011

M.D. Sinnott, P.W. Cleary, R.D. Morrison, Is media shape important for grinding performance in stirred mills?, Minerals Engineering, Vol. 24, No. 2, 2011

U. Ulusoy, I. Kursun, Comparison of different 2D image analysis measurement techniques for the shape of talc particles produced by different media milling, Minerals Engineering, Vol. 24, No. 2, 2011

Hee Chan Cho, Kwan Ho Kim, Hoon Lee, Dong Jun Kim, Study of residence time distribution and mill hold-up for a continuous centrifugal mill with various G/D ratios in a dry-grinding environment, Minerals Engineering, Vol. 24, No. 1, 2011

R. Arbain, M. Othman, S. Palaniandy, Preparation of iron oxide nanoparticles by mechanical milling, Minerals Engineering, Vol. 24, No. 1, 2011

A. Bagherzadeh Kh., A.A. Mirghasemi, S. Mohammadi, Numerical simulation of particle breakage of angular particles using combined DEM and FEM, Powder Technology, Vol. 205, No. 1-3, 2011

Young-Don Ko, H. Shang, Time delay neural network modeling for particle size in SAG mills, Powder Technology, Vol. 205, No. 1-3, 2011