Choose a year: 2021 : 2020 : 2019 : 2018 : 2017 : 2016 : 2015 : 2014 : 2013 : 2012 : 2011 : 2010 : 2009 : 2008 : 2007 : 2006 : 2005 : 2004 : 2003 : 2002 : 2001 : 2000 : 1999

Full papers of hyperlinked titles can be downloaded via ScienceDirect.

F.K. Mulenga, N. Chimwani, Introduction to the use of the attainable region method in determining the optimal residence time of a ball mill, International Journal of Mineral Processing, Vol. 125, 2013

J. Yianatos, L. Bergh, L. Vinnett, F. Díaz, Modeling of residence time distribution in regrinding Vertimill, Minerals Engineering, Vol. 53, 2013

Y. Ke, L. Chai, Y. Liang, X. Min, Z. Yang, J. Chen, S. Yuan, Sulfidation of heavy-metal-containing metallurgical residue in wet-milling processing, Minerals Engineering, Vol. 53, 2013

C.W. Steyn, C. Sandrock, Benefits of optimisation and model predictive control on a fully autogenous mill with variable speed, Minerals Engineering, Vol. 53, 2013

F. Ahmadzadeh, J. Lundberg, Remaining useful life prediction of grinding mill liners using an artificial neural network, Minerals Engineering, Vol. 53, 2013

C. Acar, C. Hosten, Grinding kinetics of steady-state feeds in locked-cycle dry ball milling, Powder Technology, Vol. 249, 2013

S. Mohammadnejad, J.L. Provis, J.S.J. van Deventer, Effects of grinding on the preg-robbing potential of quartz in an acidic chloride medium, Minerals Engineering, Vol. 52, 2013

B. Csoke, Á. Rácz, G. Mucsi, Determination of the Bond work index of binary mixtures by different methods, International Journal of Mineral Processing, Vol. 123, 2013

N.S. Weerasekara, M.S. Powell, P.W. Cleary, L.M. Tavares, M. Evertsson, R.D. Morrison, J. Quist, R.M. Carvalho, The contribution of DEM to the science of comminution, Powder Technology, Vol. 248, 2013

H. Cho, J. Kwon, K. Kim, M. Mun, Optimum choice of the make-up ball sizes for maximum throughput in tumbling ball mills, Powder Technology, Vol. 246, 2013

H. Choi, J. Lee, H. Hong, J. Gu, J. Lee, H. Yoon, J. Choi, Y. Jeong, J. Song, M. Kim, B. Ochirkhuyag, New evaluation method for the kinetic analysis of the grinding rate constant via the uniformity of particle size distribution during a grinding process, Powder Technology, Vol. 247, 2013

A. Ebadnejad, G.R. Karimi, H. Dehghani, Application of response surface methodology for modeling of ball mills in copper sulphide ore grinding, Powder Technology, Vol. 245, 2013

L. Hao, Y. Lu, H. Sato, H. Asanuma, J. Guo, Analysis on energy transfer during mechanical coating and ball milling­Supported by electric power measurement in planetary ball mill, International Journal of Mineral Processing, Vol. 121, 2013

V. Rodnianski, N. Krakauer, K. Darwesh, A. Levy, H. Kalman, I. Peyron, F. Ricard, Assessing the stirred mill design space, Powder Technology, Vol. 243, 2013

A.J. Swart, P. Mendonidis, Evaluating the effect of radio-frequency pre-treatment on granite rock samples for comminution purposes, International Journal of Mineral Processing, Vol. 120, 2013

N. Chimwani, D. Glasser, D. Hildebrandt, M.J. Metzger, F.K. Mulenga, Determination of the milling parameters of a platinum group minerals ore to optimize product size distribution for flotation purposes, Minerals Engineering, Vol. 43-44, 2013

Y. Ghorbani, A.N. Mainza, J. Petersen, M. Becker, J-P. Franzidis, J.T. Kalala, Investigation of particles with high crack density produced by HPGR and its effect on the redistribution of the particle size fraction in heaps, Minerals Engineering, Vol. 43-44, 2013

M.M. Bwalya, M.H. Moys, A model for pulverised fuel production in an air-swept tube mill, Minerals Engineering, Vol. 43-44, 2013

E. Lee, M. Evertsson, Implementation of optimized compressive crushing in full scale experiments, Minerals Engineering, Vol. 43-44, 2013

J.D. le Roux, I.K. Craig, D.G. Hulbert, A.L. Hinde, Analysis and validation of a run-of-mine ore grinding mill circuit model for process control, Minerals Engineering, Vol. 43-44, 2013

G. Asbjörnsson, E. Hulthén, M. Evertsson, Modelling and simulation of dynamic crushing plant behavior with MATLAB/Simulink, Minerals Engineering, Vol. 43-44, 2013

M.P. Bueno, T. Kojovic, M.S. Powell, Multi-component AG/SAG mill model, Minerals Engineering, Vol. 43-44, 2013

P. Itävuo, M. Vilkko, A. Jaatinen, K. Viilo, Dynamic modeling and simulation of cone crushing circuits, Minerals Engineering, Vol. 43-44, 2013

E.R. da Cunha, R.M. de Carvalho, L.M. Tavares, Simulation of solids flow and energy transfer in a vertical shaft impact crusher using DEM, Minerals Engineering, Vol. 43-44, 2013

R.M. de Carvalho, L.M. Tavares, Predicting the effect of operating and design variables on breakage rates using the mechanistic ball mill model, Minerals Engineering, Vol. 43-44, 2013

G.B. Tupper, I. Govender, A.N. Mainza, N. Plint, A mechanistic model for slurry transport in tumbling mills, Minerals Engineering, Vol. 43-44, 2013

R.A. Bearman, Step change in the context of comminution, Minerals Engineering, Vol. 43-44, 2013

A. Jankovic, W. Valery, Closed circuit ball mill - Basics revisited, Minerals Engineering, Vol. 43-44, 2013

D. Saramak, R.A. Kleiv, The effect of feed moisture on the comminution efficiency of HPGR circuits, Minerals Engineering, Vol. 43-44, 2013

S. Martins, W. Li, P. Radziszewski, A. Faucher, S. Makni, Experimental and simulated instrumented ball in a tumbling mill­ A comparison, Minerals Engineering, Vol. 43-44, 2013

O. Altun, H. Benzer, U. Enderle, Effects of operating parameters on the efficiency of dry stirred milling, Minerals Engineering, Vol. 43-44, 2013

T.S. Sverak, C.G.J. Baker, O. Kozdas, Efficiency of grinding stabilizers in cement clinker processing, Minerals Engineering, Vol. 43-44, 2013

S. Breitung-Faes, A. Kwade, Prediction of energy effective grinding conditions, Minerals Engineering, Vol. 43-44, 2013

P. Toor, J. Franke, M. Powell, M. Bird, T. Waters, Designing liners for performance not life, Minerals Engineering, Vol. 43-44, 2013

L.M. Tavares, R.D.C. Kallemback, Grindability of binary ore blends in ball mills, Minerals Engineering, Vol. 41, 2013

P. Radziszewski, Assessing the stirred mill design space, Minerals Engineering, Vol. 41, 2013

H. Cao, L. Jia, G. Si, Y. Zhang, A Clustering-analysis-based membership functions formation method for fuzzy controller of ball mill pulverizing system, Journal of Process Control, Vol. 23, No.1 2013